I uninstalled CS3 just like the instructions. Want to reinstall and can't?
Hello. I up grade my operation system on my mac and had to reinstall PS. I went to application folder and uninstalled like the directions. I have the PS, CD with serial number and when I put in the CD I don't have or see the install icon. There are 3 icons on the CD. Read Me, Documentation and Goodies. Can you please help? Thanks in advance.
Diane
Hi Diane,
First, the Design Premium CS3 applications should nominally work running under 10.7. This version (CS3) has support for native Intel processors as well as the older PPC chip architecture. Something to be aware about is if you were running any of the apps under Rosetta (PPC emulation) then you will have problems in 10.7 (because Rosetta is dropped in 10.7).
Adobe phone support should not be stating that CS3 isn't compatible with 10.7. Did you upgrade because of that statement? There are lots of new features in CS5, but if you upgraded soley on that bad information then I can put you in touch with someone to get a return. Did you get a case number for that call? We need to make sure those agents have correct and valid information.
Second, so you have the setup icon on the installer disk, but when you launch it there's no option to install Ps? If you can post some screen shots that might help understand what your seeing.
regards,
steve
Similar Messages
-
I just received a new mac and I am trying to sync my ipod to it but everytime I try it stays stuck on the "backing up" section of the sync. I have already unauthorized my other computers like the instructions said to but that did nothing. Please tell me what I should do or how to back up my device.
You are in iTunes for Windows.
-
Hi,
I am going to make a new packaging for a product my company is going to launch next month. The packaging is cylindrical in shape and made of paper twisted and wound around a cylinder.
I have completed the label in Adobe Illustrator and it is a square image. Now I want to design the label in a twisting shape that wounds the cylindrical container just like the pringles chips paper container label.
Please give me some tips or instructions that can help me design the label in my desired form. Thank you...shawon,
You may, based on the cut version showing a cut that starts and ends at the corners (Smart Guides are your friends):
1) Create the full label going all the way round, as the basic rectangular/square shape (works with both a rectangle and a square, the latter just having the same width and height), with all the artwork;
2) Decide the number of cuts;
3) Create a straight slanting path from the top left corner (you may use the Line Segment Tool) to somewhere further right at the bottom, then with the Reference Point in the Transform palette set to top left change the W value to the total width of the rectangle divided by the number of cuts, this will give you the right angle;
4) Move a copy of the straight path from 2) to the right by its W value;
5) Select both straight paths from 3) and 4) and Ctrl/Cmd+J to join them thereby creating a parallellogram with twice the W value from 3)/4);
6) Move copies of the parallellogram to the left and right by the W value from 3)/4), repeating until you have more than covered the original rectangle;
7) Leave the leftmost parallellogram where it is (covering the top left of the original rectangle) and move the others down by the height (of the original rectangle/the parallellograms), leave one where it is and continue with the remaining one(s) until they are all placed below one another;
8) Move copies of the original rectangle from 1) down by its height until you have rectangles behind all the parallellograms;
9) For each set of parallellogram and rectangle, select both and Object>Clipping Mask>Make;
10) Select all and Group them;
Now you should have the final shape and look of the cut rectangle as a group of clipping masks, made digitally; you may use that as it is to cut a single label, or you may:
11) Move copies to the right by the W value from 3)/4) to have multiple labels to cut.
This obviously requires a rather accurate cutting, but it may be less critical than usual, given the nature of the twisted label. -
Videos won't play in Safari. Notice says, "You need to upgrade your Adobe Flash Player to watch this video." I have downloaded it, but no change. All videos play OK in Firefox, but I like the controls in Safari better and want to stay with it.
Try deleting Flash cookies.
Flush.app – Flash Cookie Removal Tool For OS X | MacHacks.TV
If that doesn't help, UNinstall the old Flash plugin first, then reinstall new.
Troubleshoot Flash Player | Mac OS
Then restart your Mac. -
Hello, I just bought the premiere cc 2014 pro and I get a confirmation number order, I wanted to know if they will send me the serial number it sent via e mail
Some general information
Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back
in to the Cloud for things to work
http://www.adobe.com/products/creativecloud/faq.html
http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall
http://forums.adobe.com/community/download_install_setup/creative_cloud_faq
what is http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html
Cloud Getting Started https://helpx.adobe.com/creative-cloud/topics/getting-started.html -
I followed the instructions on your site and Roboform's site, but Roboform doesn't appear in the Customize Toolbar window nor does it appear in the Extensions list. How can I get the Roboform Toolbar back?
Here's an interesting bit: iTunes will let me restore my iPod touch from backup: it's still running iOS 4.3.3. I figured as much... there's backups showing in the Preferences -> Devices list for both devices (and even my old, long gone iPod touch 2G), but my iPhone (on iOS5) isn't giving me any such option. I remember I had to downgrade before to get the backup restored (something went haywire in the setup assistant, and I couldn't restore a backup from iTunes there)... If it was possible to go to iOS 5.0 rather than 5.0.1 I would just do the same thing again, but iOS 5.0.1 isn't an option. I attached a screenshot. Hopefully Apple can get this nonsense sorted out; I think iOS 5 might be the root of this, somehow.
-
MBP hard drive beeps after Snow Leopard Upgrade, just like the unibody
After upgrading my MBP to Snow, it is now beeping from the hard drive every 10-15 seconds, just like the videos that were posted of unibody MBPs beeping in 10.5.8 (which Apple released a firmware update for).
Just wondering if anybody else is experiencing this?sure. I'm using seagate 500gb hdd. But still better than 10.5 where I can not start the system at all.
-
This is probably a stupid question, but what does the red circle with a number in it mean on iCal? It looks just like the emails notification. I do not have anything do or up in my cal.
Actually, another person on the "more like this" had the right answer. It meant I had a notification for an invite that I needed to respond to.
Hope this helps you as much as it helped me.
D -
When downloading a CD album, if it contains different artists, the album is split up into separate albums/icons. How do I get all songs into one album (just like the original CD)?
Generally, in iTunes, all you need to do is fill in an appropriate Album Artist to keep things together. For older iPods each track from the same album should have the same artist, or be marked as a compilation where appropriate. For iOS devices you may need to go to Settings > Music > Group By Album Artist > On.
For more details see my article on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
tt2 -
I just bought the canon 5d mark iii and my photoshop elements 10 won't read my raw files. I want to buy photoshop elements 13 but want to make sure my camera is compatible with it first. Thank you for your help!
Photoshop elements 10 should be able to open those files if you update to camera raw 6.7
Which operating system are you using?
windows
Adobe - Photoshop Elements : For Windows : Camera Raw 6.7 update for Elements 10
mac
Adobe - Photoshop Elements : For Macintosh : Camera Raw 6.7 update for Elements 10
Also, photoshop elements 13 will open those files as well. -
I had to get a new ipod....they said I just needed to plug it in and sync to my itunes.. I get an error 1413 when I try to follow the instructions to restore. I can't find any information on error 1413, what does this mean?
Now it keeps saying that it is restored but there is still no music or video on it. And a new error is coming up that says "We could not complete your iTunes store request.The iTunes Store is temporarily unavailable. Please try again later."
-
How can I get the update on my Mac Book Air just like the new mac
How can I get my mac book air too look just like the new one on your web page?
(IOS 8)
Please Let Me Know
Thanks,
Nick Husslein
(NickHusslein -Screen Name-)
P.S I love your guys Products!You can sign up for public beta testing, but that's about it. Otherwise you will have to wait until the fall.
-
Is Warranty/AppleCare International just like the laptops?
Hello all.
If anyone can tell me, *if the iPad's warranty/AppleCare is international*, just like the MBs and the MBPs, or is it local??
Thanks and cheersFor The People Who Need My E-Mail They Sent Me;
http://s1001.photobucket.com/albums/af133/CallumCc/?action=view¤t=iPadWarr anty.png
Just tell them you have an E-Mail saying that it is International and they should change it. If they ask for the E-Mail just save the picture and forward it to them. -
My MacBook Pro died, but have a TimeMachine backup. I've bought a new one. How do I make the new one just like the old without affecting the OS on the new one?
ppauley wrote:
My MacBook Pro died, but have a TimeMachine backup. I've bought a new one. How do I make the new one just like the old without affecting the OS on the new one?
One you start up the new one for the first time, Setup Assistant starts and offers you the option of migrating your old Mac to your new Mac with Time Machine, among other choices, as the source. You can also use Migration Assistant (in the Utilities Folder) to do the same thing. -
There is no "deactivate" function and the technical support person I chatted with recommended I come here. Can I just use the serial number again? How can I deactive? Has anyone else run into this? How can I get Dreamweaver 8, which is no longer being activated by Adobe, on a new computer? Is it even worth doing or do I need to get a new version. What are the killer features I'm missing?
If you manage to get it installed on your current OS, don't forget to install the 8.02 update.
Adobe - Dreamweaver Support Center : Updaters
Nancy O.
Maybe you are looking for
-
Sales value in fd32 showing '0'
Hi Friends, The 'Sales Value' field in fd32 is showing '0'. IT is not updating the s066 and s077 info struc. I have maintained all the credit mgmt settings as per the note 18613 and 377165. The point is, this is updating in our D system but in our
-
Hello, I am wondering is there anyway to create a Table View and attache that to a tab in a tabbed pane? I am confused, because always Table extends from JFrame. (It seems like it is a stand alone application). If I create the table this way, how can
-
Hi friends, Can you please give the details of class(not HR_INFOTYPE_OPERATION) for updating infotypes? Thanks in advance, Anu
-
Error message when trying to email from iPhoto
Just spoke to Apple support because I was unable to email from iPhoto unless I went through Mail (i.e. no templates). I had struggled with this for some months. The patient and helpful Apple people solved the problem after a couple of hours. Two-step
-
I used to make Flex 3 applications until yesterday. Today I can't and I don't know why (was it Windows Update!?). I have the latest Flash Player Debug version installed. If I launch IE normally, I can see any type of flash content on the web: This is