I uninstalled ver 11, installed ver 10.7 because ver11 won't work on my XPsp3 machine with my vinyl conversion software to mp3, but upon launch i get :"itunes library.itl cannot be read because it was created with a newer version of itunes'.
I uninstalled and deleted ver 11, installed ver 10.7 because ver11 won't work on my XPsp3 machine with my vinyl conversion software to mp3, but upon launch i get :"itunes library.itl cannot be read because it was created with a newer version of itunes'.
Hello, Stephen.
Thank you for the question. You will need to rebuild your iTunes library file in order to open an older version of iTunes. Below, I have included the article that walks you through this process. Start with the section labeled Re-creating the iTunes Library file.
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/ht1451
Cheers,
Jason H.
Similar Messages
-
I have my iTunes on a Windows XP operating system. My iTunes Library is stored on a external hard drive(H) with a desktop shortcut on the C drive pointing to the H drive where the iTunes LIbrary is located. I have it set up so that when I click the iTunes desktop shortcut it routes to the H drive and retrieves my iTunes Library from there. I've had a hard drive crash before and lost all of my iTunes Library.
So, if all of that makes any sense, I got a new desktop computer with Windows 7 Operating System and went online and downloaded the most recent iTunes softwear. I then attached the external hard drive from my old Windows XP system to the new Windows 7 Sytem. I routed it the same way I had it on the old system, but i keep getting this error message- "The file *iTunes Library.itl* cannot be read because it was created by a newer version of iTunes." To make matters worse, I tried to put the external hard drive back on my initial Windows XP Sytem and now its giving me the same error message. I know its alot to digest, but can anybody help me?????For general library squiffiness following an upgrade or crash the easiest thing is to restore your last backup, but I guess if it were that simple you wouldn't be here.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these andcopy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
PS There is also a new iTunes build to download today, so might be worth getting that. A new iTunes should always load an older library file.
tt2 -
Can't open itunes due to error "the file itunes library.itl cannot be read because it was created by a newer version of itunes."
See Empty/corrupt iTunes library after upgrade/crash.
tt2 -
On my old iTunes sofwear iTune store would not open. I uninstalled iTunes and downloaded the new updates and installed it. Now I get a message that said " The file iTunes Libary.itl" cannot be read becouse it was created by a newer version of iTunes.I did everything it said to do inarticle HT1923 Removing and reinstalling iTunes, Quick Time, and other sofware components for Windows Vista or Windows 7. Now what?
Unless you've recently attempted to downgrade iTunes this is probably a sign of a corrupt library file. See Empty/corrupt library after upgrade/crash.
tt2 -
How do I get onto my Itunes? I get this message even when I am doing something else.
Unless you recently attempted to downgrade iTunes this probably indicates a corrupt database. See Empty/corrupt library after upgrade/crash.
tt2 -
I have un installed and installed itunes and quick many times in the order suggested and stioll get the message " The file iTunes Library.itl cannot be read ecause it was created by a newer version of itunes. Please please help i have tried everything for the past 3 weeks. HELP ME PLEASE SOMEONE
See Empty/corrupt iTunes library after upgrade/crash.
tt2 -
The file ''itunes library.itl'' cannot be read because it was created by a newer version of itunes
Hi I have just upgraded my version of Mac on my Mac Air and now when I click on Itunes it says - THE FILE ITUNES LIBRARY.ITL CANNOT BE READ BECASUE IT WAS CREATED BY A NEWER VERSION OF ITUNES. WOULD YOU LIKE TO DOWNLOAD ITUNES NOW. when i click yes it says it failed because it cannot connect to the network? but I am on the network??
-
Hi, I have just had the message - download itunes again as you cannot burns cds etc - this sometimes happens said the message. So I removed itunes and downloaded it again and now when I click to open it says 'itunes library .it' cannot be read as it was created by a newer verson - help!
See Empty/corrupt iTunes library after upgrade/crash.
tt2 -
I updated my computer to Itune 11, did not like it, and uninstalled it exactly according to directions. I re-installed Itune10.7.021 for Windows 64bit, but now I keep getting the message "The file itunes library.itl cannot be read because it was created by a newer version of itunes. How can I resolve this problem?
zepel has it, but perhaps some more detail will help.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
Error message when opening itunes...The itunes library.itl cannot be read because it was created in a newer version of itunes... how do i fix, it will not open with any of my ipod, ipad, iphone.
I don't know why this error occurs, unless you have attempted to downgrade iTunes.
This method should get you up and running again.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
I receive the message: The file "iTunes library.itl"cannot be read because it was created by a newer version of itunes. I do not know exactly what this means. I have Windows 7 on my computer and was able access itunes until just recently. I have tried uninstalling and reinstalling itunes multiple times and that does not work. Sometimes I can get in when immediately after installing, but then if I close it, i cannot get back in. Now, i can't get in at all.
That message is usually a sign that you tried to roll back to an earlier build of iTunes, but occasionally I've seen it connected to a new upgrade. This technique should fix things.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
I Was trying to update to the latest version; i uninstall to download new version because it wasn't letting me update. Now it wouldn't open at all because "The file"iTunes.Library.itl"cannot be read because it was created by a newer version of iTunes".:( How do i go back to last install or make this new version works?
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
I had to uninstall iTunes because when I connected my ipod and was in that file and clicked on music to add songs that file was empty. Once I downloaded iTunes again a box appeared that said The file iTunes Library.itl cannot be read because it was created by a newer version of itunes..............so then I unistalled iTunes and downloaded again 4 different times and got the same message each time. I am using a laptop Windows Vista 64 bit system...please help
I don't know how you received an upgrade for iTunes. You make it sound like it was sent to you. At most your computer will tell you of a new version and you tell it to download it and install it. However, a computer will not do this for a version which is incompatible. iTunes 10.7 came out a few weeks ago but your computer would not notify you and even if it did, 10.7 would refuse to install on your computer. So this part isn't making a lot of sense.
Two ways to get the 'newer version' message. One is to open your library on a computer running a newer version, and then try to open it with an older version. Usually happens when the library is on an external and used with multiple computers. The second way is if you have multiple versions of itunes installed on your computer.
The newest (and likely the last) iTunes for OSX 10.5.8 is iTunes 10.6.3 which has been out for quite a while.
iTunes 10.6.3.25 - http://support.apple.com/kb/DL1575 -
just installed latest itunes to my laptop, and icon is on my homepage, but when i try to load it up, i get this message ,The File "itunes Library.itl" cannot be read because it was created by a newer version of itunes! Ive tried uninstalling it then installing again but nothing, ive ran scans on both itunes and quicktime to see what the problem is, and i just keep gettin this message! how do i fix this ANYONE please!
The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes".
Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash -
I just installed iTunes on my new laptop. When I click on the desktop icon I receive a pop up that says "The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes". I have no idea what this means or what to do about it. I can't even find a file on my computer like the one referred to in the pop up. I am currently considering keeping my old laptop if it is the only way for me to continue to access iTunes. What should I do to fix this?
What version of iTunes are you using? An .itl file is something that Windows uses, or very old versions of iTunes on Mac. The library file on Macs is now .xml and has been since late iTunes 4.
Is iTunes running ok without any problems after you OK that message? If it is, then you may be able to ignore it if you can't account for why you're getting it. But make sure you take backups in case something happens in the future.
Maybe you are looking for
-
Acrobat Pro install fails on OSX Yosemite 10.10.1
Hi! I have a license for Acrobat Pro XI. When I try to install, the intstallation terminates with Installation failed. Jan 27 16:23:45 installd[929]: PackageKit: ----- Begin install ----- Jan 27 16:23:59 installd[929]: PackageKit: Install Failed: Err
-
Hello Friends, I need help on populating the payment method for the intercompany posting. I have to populate based on Z-table. This Z-table will have the payment method based on company - profit center combination. I am updating the payment method at
-
Adobe Edge Inspect doesn't start
I installed Abode Edge Inspect on my Macbook Air, running 10.8.2 and when I launch the app nothing appears in the dock. When watching the activity monitor, sorted by CPU useage, every time I launch the app the process "report crash" moves to the top
-
if i paid for a tv show season and trying to download it to my ipad, why does i state not compatable with my ipad..itunes took my money with no problems. and Bought other tv show with no problem..Any help would be great..
-
necesito saber si al encender un Ipad "por primera vez" se pueda hacer que se reproduzca un video institucional automáticamente