I unintentionally deleted the first segment of some video. I was able to get it out of the Trash and into "Finder", but I cannot restore it to iMovie and the original video. Help! How do I move the video (now in Finder) back to iMovie?

I deleted (to Trash) a segment of "raw footage" from an iMovie project that I did not want to delete.
I was able to retreive it from the Trash and move it to Finder, but I cannot figure out how to move it back to iMovie.
How do I do this (restore the video segment to the start of the project)?
Or, do I have to load the original video again from the camera?

@ "Afterimages":
Well, yes, I suppose I could re-import the video. (LIkely ALL of it, dammit!)
So, unless I'm mistaken that would be the "long way" to resolving this issue.
I was able the take the deleted video out of the Trash and now it's in Finder. Why can't I simply re-insert it into iMovie where it orginally was? That would be the simple solution, just "click and drag", or something like that, correct? Maybe that's impossible? (In which case, I must ask, "Wouldn't the creators of iMovie have considered this "boo-boo" and done something to remedy it easily?" I doubt I'm the first vidiot to do this...

Similar Messages

I cannot get the Output Module to work. I was able to get the button to show up, but when I click on it, nothing happens. i need to export a PDF asap

I cannot get the Output Module to work. I was able to get the button to show up, but when I click on it, nothing happens. i need to export a PDF asap. I am trying to export 33 PSD files in BRIDGE to a PDF like I used to do on my other computer with bridge.

Let's start with the general things.
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
orange Firefox button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
In the dialog that opens, you can remove the site's cookies individually.
Then try reloading the page. Does that help?

I am over capacity and think it's because I have Downton Abbey Season 1 saved in iTunes. How can I move the episodes to an external hard drive?

I am over capacity on my #GS iPhone and I have a very large amount of audio space that I think might be taken up by season one of Downton Abbey. I have tried to copy and save episodes to my external hard drive but I get a message saying I "don't have permission". How can I move the six episodes out iTunes ??

dckramermd wrote:
How can I move software program over to an external hard drive to free up space on my imac. I have move documents and photos and movies but the only thing left is softward programs. How do you move them to the external drive?
EXTREMELY poor idea! Leave the apps on the internal HD. You can move files and libraries from iTunes, iPhoto, iMovie, Aperture, etc.. to an external HD but leave the apps them self on the internal HD.
Did you empty the Trash after moving all that data to the EHD??

I turned my mac book pro off with a cd in the drive and when i turned the mac back on it will not boot up. I was able to get disk out by holding the finger pad down.

I turned my mac book pro off last night with a cd still inside it as i installed a new printer. When i turned mac back on it would not load up. I get the apple symbol, a little swirling circle and a bar below it. Any help would be very appreciated. Thank you.

Start up in Safe mode. http://support.apple.com/kb/HT1564

How do i move a video file from the theater to the library for more editing? New version of iMovie.

How do I move a video file from theater to the library for additional editing in iMovie. It is a new iMac so i guess i have the newest version of iMovie.

Hi hilldw61,
Welcome to the Apple Support Communities!
I understand that you have added a clip or project to iMovie Theater but would like to continue working on it. When you upload the project to iMovie Theater, the original project remains in iMovie where you can edit it further.
Add, remove, and play clips and projects in iMovie Theater - iMovie Help
Best regards,
Joe

How can you move the objects from one server to another?

how can you move the objects from one server to another?

Hi,
Collecting objects for Transporting
1. rsa1->transport connection
2. left panel choose 'object type', middle panel choose 'infocube' and 'select objects'
3. then choose your infocube and 'transfer'
4. will go to right panel, choose collection mode 'manual' and grouping only 'necessary objects'
5. after objects collection finished, create request
6. If they are $TMP, then change the package.
7. When you click the Save on the change package, it will prompt for transport. Here you can provide an existing open transport request number, or if you like here itself you can create a new one.
8. You can check the request in SE09 to confirm.
Releasing Transport Request
Lets say you are transporting from BWD to BWQ
Step 1: In BWD go to TCode SE10
Step 2: Find the request and release it (Truck Icon or option can be found by right click on request #)
Note: First release the child request and then the parent request
Steps below are to import transport (generally done by basis )
Step 1: In BWQ go to Tcode STMS
Step 2: Click on Import queue button
Step 3: Double Click on the line which says BWQ (or the system into which transport has to be imported)
Step 4: Click on refresh button
Step 5: High light the trasnport request and import it (using the truck icon)
Transport
http://help.sap.com/saphelp_nw2004s/helpdata/en/b5/1d733b73a8f706e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/224381ad-0701-0010-dcb5-d74236082bff
Hope this helps.
thanks,
JituK

I made a movie in iMovie from an imported slideshow. How do I export the movie to burn on a disc to play on a pc

I made a movie in iMovie from an imported slideshow. How do I export the movie to burn on a disc to play on a pc? I burned one copy and it didn't playback properly on the PC. The pictures played extremely slow while the music played

Hi cortiz58,
Welcome to the Support Communities!
What version of iMovie are you working with? Is your end goal that you need to play the file on a Windows computer, or is it that you need to burn the file to DVD?
See this link for tips to re-wrap your file for Windows:
How to create a video for playback with Windows/XBox/PS3/… etc?: Apple Support Communities
https://discussions.apple.com/docs/DOC-5781
If you export the iMovie file as a .mov file, you can play it in iTunes for Windows on your PC.
If you want the ability to burn to DVD, then you may consider downloading the free 30 day trial of our professional video application. Final Cut Pro X can import your iMovie project and burn it to DVD.
Apple - Final Cut Pro X - Overview
http://www.apple.com/final-cut-pro/
Cheers,
- Judy

How do i move the the picture to the right about half a inch to fill the screen properly

how do i move the screen picture to the right about half a ince to fill the scree properly and allow for full view of icons?
This question was solved.
View Solution.

The issue is with the settings on your monitor. One of the buttons on the front of your monitor should take you into the settings for your monitor. Select the option that moves the video horizontally, use the arrow keys to move the correct direction and press the settings key again to exit. Should be pretty simple.

How can I move the ODI Work Repository from one server to another server?

How can I move the ODI Work Repository from one server to another server?

Hi,
If you would like to move your source models, target models and project contents from Work repository 1 to another work repository.
I.e. Dev. server to Prod Server.
1. Firstly, replicate the master repository connections i.e. with same naming conventions manually
2. Go to Dev. Server work repository -> File Tab -> Click on Export work repository (save it in a folder)
3. After exporting, you can view the xml files in the folders.
4. Now, Open the Prod. server and make sure you already replicated mas. rep. details.
5. Now, right click on model and import source model in synonym mode insert_update (select source model from the folder where your xml file located)
6. Similarily, import again target then Project.
Now, check. It should work.
Thank you.

I have an older macbook circa 09 and purchased a new macbook pro 2012. The older one has been backed up to an older time capsule. How do i move the files to my new macbook?

I have an older mackbook pro circa 2009, i thought it died on me it just went completely black. I later found out just a bad battery i purchased a new one in the interim. Now that i have discovered the problem i bought an older time capsule and backed up the older macbook i now want to transfer my personal files to my new macbook pro to maintain one personal mackbook. How can i move the files from my time capsule to my newer macbook pro?
thank you in advance for your help!!

http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

HT4436 I have now downloaded all of my CD's to my itunes library and have since only purchased new music using itunes Store. This itunes library is stored on an old Dell Desktop that I am getting ready to replace with an iMac; how can I move the music? 8

I have now downloaded all of my CD's to my itunes library and have since only purchased new music using itunes Store. This itunes library is stored on an old Dell Desktop that I am getting ready to replace with an iMac; how can I move the music? 86GB
Is the music I downloaded from my CD's already in the iCloud or only the music I purchased on itunes?

This might help: http://www.macworld.com/article/1146958/move_itunes_windows_mac.html.

I've an apple ID used to buy off iTunes and a mobileme account for the calendars and contacts. How can I move the calendars and contacts to the older apple ID and use it for iCloud?

I've an apple ID used to buy off iTunes and a mobileme account for the calendars and contacts. How can I move the calendars and contacts to the older apple ID and use it for iCloud?

If you remeber the password to that Apple ID then follow these steps
1 - Make sure you have an email address that is NOT an Apple ID
2 - Go to AppleID.Apple.com
3 - Where it reads Manage Apple ID - Sign in
Once you are signed in want to make sure the email address you are wanting to use is NOT set up as a "Recovery/Rescue" email for this account.
[To check this - Main page where you see Primary ID - below do you see the email address you want to use listed towards the bottom? Yes - Delete / No - Good ./. If made any adjustments "Save" Next on the left select "Password & Security" - Answer your security questions you set up "if you have any" then scroll towards the bottom and check to see if you see the email address you want to use. Yes - Delete / No - Good] <-> Also you can change your password on this page as well. Any adjustments made "Save"
Once this is done go back to the main page where you should read "Primary ID" and change the email address that is showing to the new email address youo want. "Save" Done
I learned this not to long ago and worked for me. Hope this helps you!

How do I get the sync of my 3GS on my computer to transfer everything (files, apps, etc.) to my new iphone4? And then how do I move the sync to a newer computer so I can sync the new phone with the new computer?

How do I get the sync of my 3GS on my computer to transfer everything (files, apps, etc.) to my new iphone4? And then how do I move the sync to a newer computer so I can sync the new phone with the new computer?
My 3GS is dying and it's synced to an older computer. I have tons of datafiles as well as apps, music, text messages, etc. that I need to get moved to the new iphone4 I'm getting. Then I need to move the sync to a newer computer so that I can sync the new phone and new computer.
I understand how to get my apps to transfer to a new pc. That's not the issue. It's getting ALL the data from the 3GS to the 4 and then to a new computer.
Thanks.

Thanks much, that's very helpful for step one (getting old phone onto new phone). Very clear.
However, I still have the problem of moving to the new computer. How do I move the sync to the new computer after the new phone is set up?

I deleted a photos from iphoto, later I found them in imoive, how do I move the photos back to iphoto?

I deleted a photos from iphoto, later I found them in imoive, how do I move the photos back to iphoto?

Hi Canadian Beaver Tail!
You may want to try restoring the photo in iPhoto, using the instructions suggested in the following article:
iPhoto '11: Delete or restore a photo
http://support.apple.com/kb/PH2398
To restore a deleted photo:
If you haven’t yet emptied the iPhoto Trash, do the following:
Select Trash in the Source list.
Select the photo you want to restore.
Choose Photos > “Restore to Photo Library.”You can also drag the item out of the Trash into an empty part of the Source list.
If you use Time Machine to back up your computer, you can recover a photo, an Event, a folder, an album, a project (such as a book, card, or calendar), or a slideshow even if you deleted it from the library and emptied it from the Trash.To restore photos, quit iPhoto, open the folder containing your iPhoto library, and then open Time Machine.To open Time Machine, click its icon in the Dock, or click the Time Machine icon in the menu bar and choose Enter Time Machine.For more information on using Time Machine, see the topics in Help Center. In the Finder, choose Help > Help Center, and then search for “Time Machine.”
Thanks for using the Apple Support Communities!
Cheers,
Braden

How do I move the 'save as' dialog out of my way in Preview?

I have a stack of pdf files to rename, for which I need to read the contents. The filenames are composed from the authors, title and date which are inside the documents. The trouble is that I can't save them without the 'save as' dialog occluding the document, which I need to see in order to fish out the authors, title and date.
How can I move the 'save as' dialog off the document view?
Is there another way around this problem?
I'm using Snow Leopard's version of Preview, in case it matters.

Yes, that makes it pretty much impossible if you need to grab text from various places first and assemble it into the file name you want.
I can copy/paste text out of a PDF with the Adobe Reader into a Save As dialogue box, but then run into your same issue with Preview. I can't move back to the document to get another snippet of text.

I unintentionally deleted the first segment of some video. I was able to get it out of the Trash and into "Finder", but I cannot restore it to iMovie and the original video. Help! How do I move the video (now in Finder) back to iMovie?

Similar Messages

Maybe you are looking for