I unlocked my iPhone 3S last October and now I did an reset . Can be this lock agai? Because I'm trying to use it and I can't !
I unlocked my iPhone and after a couple of months I did reset. Now I want to use it and I can't . What could happened? It is locked again after my reset ?
How did you do the unlock? If you didn't contact the cell carrier to whom the iPhone was locked and arrange for an official unlocking, then your iPhone was hacked to unlock it and if you restored or upgraded iOS on the iPhone, the unlock has now been removed and the iPhone locked back to the original carrier. Only the carrier can authorize official unlocking.
Regards.
Similar Messages
-
I live over seas and I frequently use the Magic Jack app and texting app to call/text home for free and I would like to fix this problem soon so I don't use all my phone data too quickly, please and thank you.
Here are some links to double check in case you missed something
IOS troubleshooting wifi networks http://support.apple.com/kb/TS1398
router settings http://support.apple.com/kb/HT4199
T/S wifi connections http://support.apple.com/kb/TS1398 -
After upgrading to OSX Maverick my Apple TV has taken control of my iTunes videos insisting I have to watch it on my TV. I have tried disabling home sharing on iTunes and on the Apple TV menu, I have also checked the disable Infrared facility in Systems Prefs Security. Even if I put the Apple TV in standby as soon as I hit a key on my iMac, Apple TV comes back on and on my Itunes screen I get the Apple TV logo imprinted on the screen, meaning I can no longer watch it on my MAC, I have run out of ideas. Can anyone help.
I think you're headed the right direction. There is an AirPlay icon (on mine it is up near the play/pause controls) that I believe is used to set the default desitination for the video to play.
I'd never seen your issue before, but opened iTunes on a recently-upgraded-to-Mavericks MacBook and it did exactly as you described. While the video was loading, I switched the AirPlay option to the computer instead of ATV and it began playing locally (after a delay as you'd mentioned). I then read this page, which is actually quite old: http://forums.macrumors.com/showthread.php?t=1091073, which lead me to the icon near the play/pause button. It now has Computer selected on it, and defaults to play locally instead of the ATV even after quitting and reopening iTunes. I hope that is helpful. -
Since i got my iPhone 4S, Last year. it's the 8gb experminetal version. My phone's volume always appears. All the time. And since i got the iOS 8 yesterday. It got even worse, it won't get out anymore. I'm super mad. I don't know what's going on. Is it my case? But, i don't use a case anymore. It doesn't even lessen. And when i take pictures for like 10 seconds, i get like 50 photos. Without even clicking the button. This is a real problem for me Apple, and i need you to do something about it. I need an answer real soon.
I got Troubles too with iphone 4s with the new iOS 8, its unstable, apple said its for that model to but its not totally true, well few troubles disappear if you do this:
First you need to Sync your iphone like regular you do it, but check you could made a Saffety and restore back up manually in your computer.
then when this it's already done, disconnect your iphone, then restore your iphone as factory settings, beware! don't do this if you don't have your Saffety copy first!
when you restore your iphone as factory settings iTunes will ask you if this is a new phone or a previous phone, well, select previous iphone and select the back up copy you made, and let iTunes restore all, that fix a few issues in my phone, but the real problem its iOS 8 its not good for 4s. -
I Erases my iphone6 by find my iphone and now it did not open the passcode
i Erases my iphone6 by find my iphone and now it did not open the passcode
if it was jail broken to sim unlock the phone then that would be a possible reason
-
I changed my LCD last day and now i noticed all my pictures on my phone are gone. I tried to restore the back that I got yesterday but it wont let me because its telling me there is not enough space on my phone!!! That's wierd because I didn't download any app or anything else since my last backup and on the other hand about 3000 pictures are gone, how come there is not enough space left! I also check my usage on my phone and it shows that i have about 7.0 GB pictures!!! BUT my photos is empty! I want my picture back on my phone any solution anyone?
Thanks for your reply!
I just called the guy who changed my LCD and asked him what happend, he said there were no pictures on your phone when you gave it to me! i know he is lying tho!
My apple warranty is over and I have to pay them to get some help over the phone! -
My mom updated her iPhone to iOS7, and now she has my contacts. Does this mean that she has access to all of my photos as well? How can she 'unlink' our phones? Or, is there anyway that I can get my stuff to disappear from her phone? We share iTunes account so I think we are both on the same iCloud.
Welcome to the Apple Community.
If you are using the same ID as a primary iCloud login, then yes she can see your photos in photostream if you have it enabled.
You can use the same ID for iTunes so you can share all your purchases, but you need different ID's for iCloud.
Unfortunately, the mess caused by sharing the ID, will need to be sorted manually, once you both have your own ID's. -
I updated my iphone 5 and now it is telling me to be able to work i had to connect it to itunes and itunes it telling me that i have to restore my iphone. what can i do? i dont want to lose all my pictures and stuff like that.
Something went wrong with the update, this can and does happen with every version of iOS.
There is nothing wrong with the update.
Simply restore the device via iTunes on the computer.
If iTunes is stating it will take hours to update, that indicates an extremely slow Internet connection and is likely the reason the OTA update failed. -
I had to restore my iPhone 4 and now all my pictures are gone. I don't have them backed up to my laptop, and I thought that they automatically backed up to iCloud but I'm not sure. I had a lot of pictures that i desperately want to get back PLEASE HELP
You should be importing pics to your computer regularly as you would with any digital camera. Nothing should only be on your iphone. You should keep everything on your computer.
If you have failed to do this, then they are gone.
You can try restoring from backup. -
restored my iphone 5c and now cant activate it. tried to use wifi and i tunes but both things give me the same : We're sorry, we are unable to continue with your activation at this time. pls hep !
Was your phone jailbroken/hacked?
-
Hello. I updated my iPhone 4S to ios 7.1.1. And now it shows "no SIM card". This never happened before. How can I downgrade?
Hey User13579,
Thanks for using Apple Support Communities.
Follow these steps to attempt to resolve the issue.
iPhone: Troubleshooting No SIM
http://support.apple.com/kb/TS4148
Toggle Airplane mode On and Off.
Try turning iPhone off and then on again.
Check for a carrier settings update. Tap Settings > General > About. If an update is available, a prompt will appear.
Remove the SIM Card and verify that it is a valid, carrier-manufactured SIM. Also verify that it is not damaged, worn, or modified. Then reinsert it.
Restore the iPhone.
Have a nice day,
Mario -
I bought iMac 27 quad core i7 last June. Last month i have noticed lots of dark patches on the screen and now they are growing more. i bought this from US but now i have moved to Kuwait. How much it cost to replace the screen?
Mac and Mac models are picky about the RAM the Mac needs to see and use.
As you have found out, the 1067 speed RAM will not work in your year and model iMac.
You need the 1333 speed RAM.
If, you can return the RAM for a refund, do it!
If not, try online Mac RAM source and seller Crucial memory. They have a table that matches your Mac to the correct and reliable RAM. You may need to contact them to see whether or not they ship to South Africa, though.
If Crucial dpesn't work out, here's the specs for your year and model iMac that you need to seek out and purchase.
Maximum Memory
32 GB (Actual) 16 GB (Apple)
Memory Slots
4 - 204-pin PC3-10600 (1333 MHz) DDR3 SO-DIMM
Good Luck! -
Hello, i lost my iphone and now bought an ipad. Also my computer (where my itunes was) is dead. Is there anyway i can get my music back with my apple id?
Okay ... you might be able to get back some of your past purchases if your country's iTunes Store supports redownloading past purchases. See the following document for instructions:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
... but if you didn't maintain a back-up, then other content (songs that you'd ripped yourself from CDs and so forth) is gone, and you'd have to reimport it. -
Last night I did an update and now when I turn on my macbook it just goes to the white screen with the apple and stays like that. How do I fix this issue?
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
At&t doesn't allow me to unlock my iphone 5 'til the guaranty of 1 year with Apple ends, is this correct?!
The 1 year warranty has nothing to do with AT&T's unlocking policy. Your contractual agreement with AT&T is what matters. You must have misunderstood them, or whoever told you that misspoke.
Maybe you are looking for
-
CRM - transaction BP - length of search term 1/2 (adress)
Hey, I'm working on CRM, transaction BP. I've 2 roles for customer : person and organisation. Search term 1/2 is 20 caracters long. But, it seems to be possible to do customizing on search term. For example, in my environnemnent, customer person may
-
Can we do a direct update on fnd_concurrent_programs table
Hi Team, Can anyone help me out with this. i have a requirement where i need to set the print_flag ='N' for all the Concurrent Programs whose Printer flag is "Y". for this , Can i use a direct update statement or is there any standard API to update t
-
Multiple SSIDS with VLAN ACL seperation
Hi, I have bought a 887W and I'm new to wireless on a router, I need advice about seperating multiple SSIDs with access list. I have configured 2 SSIDs one for 'trusted' clients and one for 'guest' clients. I want to prevent the 'guest' SSID obtainin
-
Newbie Question - DVD Authoring
I am brand new to the Mac and DVD authoring, but so far love it and won't go back to a PC!!! I have approx. 150+ 8mm/Hi8/Digital 8 tapes to edit and create DVDs from. Do I need to keep the original analog or digital tapes for future projects? The rea
-
Building mysql database driven application using JSF
hello i have to build a JSF application that uses a connection with a MySql database first the user fills in a booking form, then he clicks on the button submit to save his operation where should i place the code to connect with the database? i mean