I up dated my ois to ois5 and now my ipod comes on for a few mins. and then the screen goes off you can tell it is still on but you can not see anything. What can I do?
I can not see what is going on on my ipod the screen is dark I can hear it working just cant see it... What can I do?
Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order
Similar Messages
-
I have low battery on my ipad and it still works but it is not fully charging what can i do
i have a low battery on my ipad it still works but it is not fully charged what can i do to fully charge it
Clean the charging port.
Charge using the supplied wall charger, not your computer.
Try another charger and/or cable.
If none of these work, you have a hardware problem. -
I bought the iPad 4 of America through the Apple Store of almost a month, and I am now in Egypt, and went to Tradeline company in Egypt, and said in an error made, and they do not do anything, what can I do.
(Find Permanent telephone network)
QUESTION: -
1 / What to do
2 / Can you switch the iPad in Egypt (Tradeline)
3 / Can you switch the iPad in the Apple Store is located in the countries of the world, and what these countries.
* I do not speak EnglishSwitching an iTunes Store account to a different country
http://www.ilounge.com/index.php/articles/comments/switching-an-itunes-store-acc ount-to-a-different-country/
iOS: How to change the language when it’s set to one you don’t understand
http://support.apple.com/kb/HT2371
iTunes: Changing the display language
http://support.apple.com/kb/ht2242
iOS: Using international keyboards
http://support.apple.com/kb/HT4509
Cheers, Tom -
My ipad is completely frozen (cant do anything) stating Not enough storage. It states I can manage my storage in settings, but everything is froze up. What can I do?
Reset it by holding the power and home buttons at the same time until you see the Apple logo, then release.
-
i've installed iso7 on my ipad and its asking for password but i did not install one,what can i do?
Hey Beata G,
Welcome to the Apple Support Communities. If you are unable to install the software update, you may need to plug the iPad Mini into a power source. If it is below a certain percentage in power it will require power to ensure that iPad Mini does not loose power when installing. If you still have issues the following article will walk you through that process and also if you want to update the iPad Mini through iTunes.
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht4623
Regards,
-Norm G. -
i'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games!
I have exactly the same problem.
I'm a little peed-off with Microsoft on this. The original wireless controller I have doesn't work either since the cable I'm using is 'just' the charge and play cable, so a direct connection to my Mac won't work with this cable. It's a cable for god's sake. Why on EARTH put any limitations on this!?!?
Next I learn I need an additional USB wireless receiver from Microsoft to get my original 360 controller to talk to my Mac. As I certainly don't want to fork any more microsoft dollars on this, this is not an option.
Next I think, yes! I have a MadCatz 360 wired USB controller. This should surely do the trick just plugging it in and the way I go. But oh no, for some reason I plug my MadCatz Xbox360 controller in, it flashes a few times then switches off and can't be turned on again.
The System Profiles recognizes it as a MadCatz 360 device controller but that is about it, but the ontroller software I download for the System Prefs (360Controller, USBOverdrive etc) don't even recognize the controller as being plugged in.
What the **** Is The Microsoft Deal with all of this!?!?
PS: Oh, and I forgot to mention, there are No drivers for device 4716 that I can find on the MadCatz website, or am I going blind?
If anyone has a link, it would be appreciated.
Message was edited by: nostrawaggus -
When I click on my Messages app I can see it for a brief moment and then the screen goes blank
When I click on my Messages app I can see it for a brief moment and then the screen goes blank. This happened to me last week and I Reset All Settings, which worked-but it has just happened again so that's not a long-term solution.
Hello linslaf,
It may help to force close the Messages app, then restart the device.
iOS: Understanding multitasking
http://support.apple.com/kb/HT4211
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If the issue persists, the next step would be to restore your iiPhone.
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/HT1766
Cheers,
Allen -
installing windows 8 with bootcamp 5. Have to make a choice at personalize but mouse is not working. What can I do?
I solved my problem by using a USB mouse and a USB keyboard instead of bluetooth
-
I cannot install the trial for Acrobat XI Pro. The file downloaded fine, but it does not open. What can I do?
For Windows:
http://trials2.adobe.com/AdobeProducts/APRO/11/win32/AcrobatPro_11_Web_WWMUI.exe
For MAC:
http://trials2.adobe.com/AdobeProducts/APRO/11/osx10/AcrobatPro_11_Web_WWMUI.dmg
ACROBAT XI -
i have been getting this message " no sim installed " too many times then my phone goes off , its iphone 4S , its really a problem i cant get calls or anything and im not sure how to take the SIM out then insert it again , what to do ??
Use the sim tool that came with your phone or a safety pin and just insert it into the hole at the side of the sim tray and push it in and then pull it out. It is no more difficult than that and then just close it again.
-
Hi I was try to open some video on my Facebook but it could not open so what can I do????
Try using the Facebook app.
-
I just opened asd file in cs6 but I could not see anything
I just opened asd file in cs6 but I could not see anything
I tried to open the psd file in cs6
the photoshop open byt without anything in it
I want to use kwik2 with it
I don't have cs5What’s kwik2?
http://forums.adobe.com/thread/419981?tstart=0
Boilerplate-text:
Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by keeping command-alt-shift/ctrl-alt-shift pressed while starting Photoshop after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.)? -
I clicked update for facebook And now my iPod touch 4th gen won't let me download the Facebook app I've turned it on and off like 5 times and it still won't work can you please help me
Seems to be an Apple or FB app problem. Nothing you can do but wait for it to be fixed.
-
my ipod touch died in the middle of a upgrade and now it wont come back on. When I charge it, it just goes to the apple but not the home screen. how do i fix it
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My nano and iPhone4 were face to face for a few seconds and now my iPhone won't turn on. It doesn't do anything. I had just charged it. How do I get my iPhone going again? What happened?
Reset your phone:
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release.
Maybe you are looking for
-
How do I close all tabs at one time without closing Firefox completely?
How do I close all tabs at one time without closing Firefox completely?
-
Connecting Gigaworks T20 to TV
Hi, I'm using a 3.5mm Stereo Plug to 2 Phono Leads cable to connected a pair of t20 speakers to my new Panasonic TV via the headphone socket as recommended by their tech support. The problem is that I'm only getting sound out of one speaker - I've tr
-
Importing iWeb site to dreamweaver?
Is it possible to import my iWeb site to dreamweaver? I want to do this because i find that iWeb is too simplistic and i find the options are limited. To be honest all i want to do is put the website on dreamweaver and fiddle around with the HTML cod
-
VAT GL Account Business area mandatory
Hi all, Vat Gl Account when we enter in Fi entry we could assaign to BA Whereas for Miro Entries it is not allocated to Business area Pls suggest me on this i want the report to be with business area wise for Vat and Cin related Gl Account Fast and
-
Urgent - Related to generic customer exit for Query
Hello Experts, We have a query whose selection screen has two user input variables, plant and fiscper. Let say user enters 001 plant adn fiscper 0012007. We have about 100 rows for this selection. Each row has three date fields D1, D2 and D3. we have