I updated and couldn't connect, but I found my culprit, Norton Antivirus.
Three weeks ago I updated my i-tunes to the new 6.03 version and I couldn't to the music store since then. Today i got on the support and services web page and keyed my problem. They said, among other things, to make sure there aren't any third party virus scan programs on your computer. So I disabled Norton Antivirus fro half an hour and now it works.
I think I have the exact same problem. I've discabled Norton Antivirus too and reinstalled and tried to use itunes but it didn't work. You said you disable for 30 minutes. After that what did you do. When you launched itunes and it went directly to the music store did you get connected right away or did you have to wait for a while in that 30 minute disable period?? Thanks!
Similar Messages
-
iPod updates 2 touch with the new software, and from the update they are not connected with Time phase. They appear calling but never they enter the calls. I make calls with other users and if one connects but in these two not from the update
I use Firefox 95% of the time, and there's no problem with flash content (and I'm still at .55 - downloaded .64 last week but I haven't got round to making the change yet). At the rate they've been changing it recently it may well be out of date already .
I've been trying it in Safari, too with no problems apart from You Tube, but that's because I'm blocking Google cookies.
One thought does occur - if your Flash preferences are set to block all Local Storage, it may be that the problem site is trying to use Flash cookies (LSOs). I had this problem recently with the BBC iPlayer streaming content. Little Snitch notified an attempt to connect to a new URL - emp.bbci.co.uk.
If I disallowed it, no streaming; when I allowed the connection, it still wouldn't stream, so I did a bit of digging and came to the conclusion that it was trying to set a Flash cookie. When I unblocked, lo and behold - streaming resumed as normal.
I now have LSOs blocked in a more subtle way that lets the site think it's being set (but it ain't) and the streaming still works.
As for permissions repair - always repair from local; the permissions on the original disc will have been superceded by updates and new installations of Apple software.
DU needs to be reading the packages on the HD, not the (now out of date) install disc.
The recurring repair messages are normal and don't mean anything's wrong. As long as the final message is 'repair complete' there's no need to dwell on it.
http://support.apple.com/kb/TS1448 (for Leopard and Snow Leopard - Lion no doubt has it's own set). -
I was Updating my Iphone 4s to iOS 6 through itunes. an error happended now iphone stuck on connect to itunes logo screen . tried tukrning on and of it connects but itunes does not recognize so i can restore .. any ideas?
Dont know if accidently fixed it or not i got it to be recogniced by itune im restoring it now. i held the power/sleep button till turned off. then while holding the home button under the screen connected it to the usb wire .. also i change the usb port i was using on my computer dont know if it was luck or what but glad i got my phone back.
itunes recognized it as in recovery mode
http://support.apple.com/kb/HT1808
got it working currently restoring from backup good luck guys -
My ipod touch is stuck up at Apple Logo, I have tried to update and restore through ITunes but no use, It stuck up again at Apple Logo with no Error, after restoring ITunes showes your ipod is restore but still apple logo won't go, Due to new Laptop, I do not have any backup, therefore i have tried to select new Ipod touch and goes through step by step procedure but no use, Please help what to do?
i tried reseting my ipod today and had a similar problem... it wont be recognized by itunes, the only thing i havent tried is putting it into DFU mode, or the state that it is in when u recieve it telling u to connect it to itunes.i recommend putting it into DFU mode. http://www.youtube.com/watch?v=34v8HMC9B98 this should better explain it. if i find another way, ill keep u updated
-
I have purchased an app from the app store and cannot seem to download it, the download statrs and then rapidly cuts out, it will not complete and seems to repeatedly go over the same few Mb. I have previously downloaded large files and not had a problem with them.
I have tried restarting, checked my hard disk (and repaired a sector of the disk) and checked my connection but this seems to have no effect. I have also disabled virus protection and my firewall to see if this has an effect. I have also downloaded other (free) applications to test it since then and some of these download but not the larger ones. Has anybody else encountered this? Does anyone know how to solve it?Can you download large files from other places apart from the App store, wondering if it is the App store or your internet connection.
If it just the app store check this url http://www.apple.com/support/mac/app-store/contact/ -
After prompted to update 10.9.1, my MacBook Pro updates and went thru restart but failed...I tried to start my book and gray screen, Apple logo both on, chime sounded, then went to progress bar, less than half macbook shuts down...did few times, same!!
Go to system repair, there is a prompt that cannot repair live etc....I don understand!!! Help, I need the book for work tomorrow!!Thanks clintonfrombirmingham...
After clicking "repair disk" it says DISK UTILITY STOPPED REPAIRING MACINTOSH HD, DISK UTILITY CAN't REPAIR THIS DISK. BACK UO AS MANY OF YOUR FILES AS POSSIBLE, REFORMAT THE DISK, AND RESTORE YOUR BACKED -UP FILES....
written in red: ERROR: DISK UTILITY CAN'T REPAIR THIS DISK,,,DISK, AND RESTORE YOUR BACKED-UP FILES.
how can I back up when I cannot even start my macbook? I am stuck here and have lots of important files in the hd... Please help me? Thanks you! -
My iphone showed to the settings that there is an update available, so there was a software update and i did it , but i don;t like this version ,and I want to go back .How can i do it
You cannot go back.
-
Trying to download iphone update and my network connection timed out. how can i correct this
trying to download iphone update and my network connection timed out. how can i correct this?
Temporarily disable your firewall and antivirus software and try again...
See here for Connection Issues
http://support.apple.com/kb/TS1379
From Here
http://www.apple.com/support/itunes/troubleshooting/ -
My macbook will pair with device and say its connected but won't connect
my macbook will pair with a bluetooth device and say its connected but won't connect
You need to supply more specifics. The device(s) need to be identified.
Barry -
When i do update to my iphone my pc shut down and dont finish update and now not connect with my pc
when i do update to my iphone my pc shut down and dont finish update and now not connect with my pcm just show (my iphone ) connect with itunes
Try this:
http://support.apple.com/kb/HT1808
Regards. -
I've run software update and there are several, but everytime I try to install them, I get "there was an error". I'm running system 10.6.8
Tricky. Didn't mean to intrude on Baltwo who is infinitely more knowledgeable than me over matters like this. Just wanted to reassure you over the SUID file.
I would just mention that there have been some updates in iPhoto and I'm just wondering what version you have. I do know that 9.2.3 is the last one I have and I am on 10.6.8 like you. I started on iPhoto 8.
If Baltwo doesn't return you could try another post in the iPhoto columns. -
I have been trying to share file between my Mac Book Air and PC Laptop.Sometimes my Mac sees the PC and tries to connect but every time the connection fails. It says server may not exisit or network problem. I have apparently no network problem. Thanks for any help you may provide
hi,
somewhere on the windows machineshould be something like "network setup wizard". exactly where it is and what it is called i cannot remember off the top of my head, windows help is actually slightly useful here, it should have a link to it.
all the options checked on the mac are only what services the mac is offering to other machines, they have nothing to do with the services it can access (mostly...).
oh yeah, to actually connect to the pc after you have turned its sharing on, use the finder, or, when it does not show the pc (this happens on and off, possibly a refresh problem apple...) choose go --> connect to server and enter smb://<pc's name or ip>
to find the ip, the easiest way i think is
start --> run --> cmd ->> ipconfig
Andrew
Message was edited by: Andrew Dicker -
The sound on my Iphone 4 is really quiet and muffled, i have the latest update and have restored it but it is still the same, can anyone help?
Through the headphones or through the speaker?
Have you consistently played sound through the speaker at a high volume with a lot of bass?
Have you tested it with multiple apps/songs/movies? -
My Macbook Pro's iTunes App was logged in as someone else. I logged out of that account and logged into mine, but I found that the app still shows all of the previous account's content. None of my apps, songs, or movies are there! iTunes 12.1.0.50 on OS X Yosemite version 10.10. Why is iCloud doing this, and how do I view my content again?
MacBook Pro / Mozilla Firefox / Netflix / Silverlight Update solved - DON'T DWNLOAD FROM NETFLIX
I solved this problem tonight. I have a MacBook Pro with 10.5.8. I know, it's old. But I love my Netflix and I recently noticed that Firefox plays Netflix much better. Then I suddenly got this message that I needed to download the latest Silverlight - it only takes 30 seconds! - WRONG. However, after much searching, I finally did the steps in order and it worked.
This was after repeatedly downloading Silverlight from the Netflix site without success. So here's what I did:
1. Went to http://www.microsoft.com/getsilverlight/Get-Started/Install/Default.aspx
2. Followed the directions. I felt like such an idiot for not doing it right before.
3. Go to your hard drive and search for "Silverlight" to locate ANY existing Silverlight files: .dmg, etc.
[also check your Libary/ Internet Plug-ins, but the above search is faster]
4. Drag it all to the trash and empty it.
5. Go back to the Get Silverlight page and click on the Install on that page, not the Netflix site.
6. Note the steps for Safari or Mozilla Firefox - I wanted Firefox, so I follwed those instructions.
7. Once it's installed, close all the browsers and Restart that bad boy. Right away.
8. Open a browser, go to Netflix and proceed to joyfully rot your brain with Netflix content. Yay! -
So i tried to do the newest update on my iPhone and something went wrong in the verifcation or installationand mine phone shut down and displayed the connect to itunes logo, but my phone won#t sync to my itnues. for me to restore it.
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then... See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Maybe you are looking for
-
Attempting to use bluetooth for the first time, and it never sees any other devices
I have an iPad 2 about a year old, running iOS 6.0.1. This morning I tried to connect to another iPad, over bluetooth, and neither iPad is able to discover the other. This is the first attempt to use bluetooth on either of these iPads. The other i
-
I have grey sections on my 24" iMac monitor
I uploaded a video of it here: http://www.youtube.com/watch?v=qASfhQbh9xc Any one see this before? Thanks, Rob
-
What I'm trying to do is make a simple bar graph, with multiple bars of different colors and do this using an array. I create a new bar, set its size and color, and then create another bar, set its size, color and i've also moved it over 10 pixels so
-
Refine Edge with complex background
I am working on an Easter poster for my family, and I found a photo of a bunny on wikimedia commons that I liked (shown below). When I first looked at it, I thought, "I've used the refine edge tool a few times before. I can isolate the bunny from the
-
Hi dears, I am planning the installation of G.I 11R2 and have a question regarding ASM. If I have ASM diskgroup with normal or high redundancy for my DB need I create multiplex redologs and multiplex controlfiles ? If I understood correctly the multi