I updated and now get an audio configuration problem message.

The message that pops up is "iTunes cannot run because it has encountered a problem with your audio configuration." Any advice?

Have you had a chance to look at this troubleshooting page? It may be of some help: iTunes 7 for Windows: iTunes has detected an audio configuration problem

Similar Messages

  • New MacPro 10.9.4 included Keynote. Worked fine. An update was released August 21. Just downloaded the 6.2.2 update and now get error message "You can't open the application because PowerPC applications are no longer supported". Any ideas?

    New MacPro 10.9.4 purchased three weeks ago included Keynote. App worked fine. New update for Keynote was released August 21. Just downloaded the 6.2.2 update. Tried to launch app and now get error message "You can’t open the application “Keynote.app” because PowerPC applications are no longer supported." Confused as to why it worked prior to update. Nothing else has changed. No issues with recent iMovie, Pages or Numbers updates. Any ideas?

    I tested this:
    Reinstalled Aperture 3.1 from the Trial Installer.
    In some way it seems to be working. But the whole thing is a scary Chimera.
    It can create an Aperture library. I can import and edit images, even in Graphic Converter ias an external editor.
    But the Media Browser does not show the aperture Library that I created.
    The versioning is inconsistent. The library appears as an Aperture 3.4 library in the Finder.  Aperture 3.5 seems to be able to read this library and to upgrade it to 3.5
    The Applications folder is showing the application as version 3.4 and as compatible. Spotlight is showing it as illegal.
    When opening the chimera Aperture, I see plenty of warnings in the Console window:
    An Aperture "Hang" report
    xpcproxy assertion failed
    com.apple.IconServiceAgent: main failed to composite image
    quicklookd: Warning
    and more ... the hang was critical. I had to force quit Aperture more than once.
    So be careful. I would not trust any important Aperture library to this patched application, without testing thoroughly. Be careful with your  precious photos.

  • Downloaded latest icloud update and now get this "apple outlook dav config has stopped working"

    Downloaded latest icloud software update on my PC and now icloud does not work with Outlook. It wiped out my contacts list. During numerous attempts to set up icloud get this error message "apple outlook dav config has stopped working"  Apart from the the obvious bin iPhone and get a another type of smartphone which has sync software that does not conflict with Outlook -  Any ideas how to resolve this problem?

    same problem, can´t make it work!!!!
    deleted all the appointments, did not work!
    help!

  • "Audio configuration problem" on one machine, not the other

    I have a laptop and a desktop both with Vista Home Premium SP1. I have ITunes and Quicktime on both. I can run ITunes on the desktop without getting the "audio config problem" message, but on the laptop (Toshiba Satellite A215-S5837) I have tried the fix (uninstall and re-install QT) with no luck. At first I thought the problem was fixed, but after turning the machine off and back on, the problem is still there.
    Any help?
    Thank you,
    Dave

    Unfortunately, the noir household Vista box is in a different hemisphere from my current location (it's in North Carolina), and I can't doublecheck the way that the Audio control panels are set up on Vista.
    ... but in XP, the first thing I would check on with a recalcitrant "audio configuration" error would be if the correct default device was showing up in the "Sound playback" area of the "Audio" tab of the "Sounds and audio devices" control panel.
    Can you find such a location in your Vista control panel on the PC getting the "audio configuration" error?

  • HT3606 i keep trying to update the software and it gets stuck on configuration, so i can i sped up the process?

    i keep trying to update the software and it gets stuck on configuration, so i can i sped up the process?

    Some general advice on updating:
    It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
    So before you do anything else:
    If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
    Turn off sleep mode for both screen and hard disk.
    Disconnect all peripherals except your keyboard and mouse.
    1. Repair Permissions (in Disk Utility)
    2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
    At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
    3. Download the correct version of the COMBO update from the Apple download site.
    The Combo updater of Leopard 10.5.8 can be found here:
    http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
    If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
    Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
    More information on using Software Updater here:
    http://support.apple.com/kb/TA24901?viewlocale=en_US
    Using the Combo updater ensures that all system files changed since the original 10.5.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
    Now proceed as follows:
    4. Close all applications and turn off energy saving and screensaver.
    5. Unplug all peripherals except your keyboard and mouse.
    6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
    7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
    8. Once your Mac is awake, repair permissions again, and you should be good to go!
    If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious! In fact a second restart can be recommended.
    9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a week or two while you regularly check their websites for updates.
    N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
    Lastly, Apple's own article on the subject of Software Update may also be useful reading:
    http://docs.info.apple.com/article.html?artnum=106695
    [b]If you are updating Safari (or just have):[/b]
    Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up.  If you have installed an OS update and Safari is crashing, the very [i]first[/i] thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
    So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
    Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
    Additional tips on software installation here:
    http://docs.info.apple.com/article.html?artnum=106692
    To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for  problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
    Again, the advice is to remove all Input Managers from the following directories:
    /Library/InputManagers
    ~/Library/InputManagers
    especially prior to system updates (they can always be added back one-by-one later).
    Solutions for troubleshooting installation, startup, and login issues in Mac OS X v10.5
    http://support.apple.com/kb/TS1541?viewlocale=en_US

  • I took my phone off the charger and wifi while it was updating and now it wont let me on the phone nor my computer. how do i get it to finish updating or turn on?

    i took my phone off the charger and wifi while it was updating and now it wont let me on the phone nor my computer and it just has the apple icon on the screen. how do i get it to finish updating or turn on?

    Why would you do that when your phone is updating?
    Your phone is in recovery mode If you can't update or restore your iOS device

  • I did the update and now cant open itunes i get a error 7  windows error 198

    I did the update and now itunes wont open...I get a windows error 7 (windows error 198)  HELP

    Hello there, thumerick.
    The following Knowledge Base article addresses the very issue you're describing:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I did the iTunes update and now I am getting a Windows error 126 message.

    I did the iTunes update and now I am getting a Windows error 126 message. Now I can't use iTunes at all. Any ideas?

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99606)

  • I had downloaded and installed one of those automatic Windows update and now whenever I try to open my Firefox I get an error message, "Platform version 6.0.2 is not compatible with minVersion 6.0.1 maxVersion 6.0.1

    I had downloaded and installed one of those automatic Windows update and now whenever I try to open my Firefox I get an error message, "Platform version 6.0.2 is not compatible with minVersion >6.0.1 maxVersion <6.0.1

    If you use ZoneAlarm Extreme Security then try to disable Virtualization.
    Do a clean reinstall and delete the Firefox program folder.
    * http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
    *[[/questions/869812]]
    *[[/questions/869951]]

  • I updated the IPAD with the latest update and now when I turned the IPAD on, I get the itunes logo and then nothing else.  How can I fix this to let me use my IPAD?

    I updated the IPAD with the latest update and now when I turned the IPAD on, I get the itunes logo and then nothing else.  How can I fix this to let me use my IPAD?

    YOU ARE IN RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • HT4623 My Iphone 4s just stopped during the latest update and now the screen show the Apple icon and an white bar beneath.  I can no longer get anything to work on the phone!!  Where to from here??

    My Iphone 4s just stopped during the latest update and now the screen show the Apple icon and an white bar beneath.  I can no longer get anything to work on the phone!!  Where to from here??

    You can not merge accounts.
    Apps are tied to the Apple ID used to download them, you can not transfer them.

  • Updated iTunes and now get an error message that the file iTunes Library.itl cannot be read because it was created by a newer version of iTunes. ??

    updated iTunes and now get an error message that the file iTunes Library.itl cannot be read because it was created by a newer version of iTunes. ??

    hello!
    i have a similiar problem:
    i upgraded my mac from 10.6.8 to 10.7.something recently, but i did NOT update itunes, still running version 10.4.1. now i wanted to open itunes but it tells me, that my iTunes Library.itl was created by a newer version of iTunes - which i never used!
    its annoying since i dont want to be forced to download a 720MB pckage of itunes every month - even more so, if the system start "lying" to me.
    or is it another problem? anyone got the same? any solution? maybe an erratic prompt?
    thanks, florian

  • I backed up my iPhone to my computer before I did the ios 8 update and now when i go t restore it it tells me there isnt enough space on the iphone. I lost half of my pictures in my camera roll. Is there anyway i can get these back?

    I backed up my iPhone to my computer before I did the ios 8 update and now when i go t restore it it tells me there isnt enough space on the iphone. I lost half of my pictures in my camera roll. Is there anyway i can get these back?

    You did import these important photos over to an alternative storage medium, just like you would with any digital camera, right?

  • HT1414 I backed up my iphone, then did an update and now I have no contacts, music or apps. How do I get them back?

    I backed up my iphone, then did an update and now I have no contacts, music or apps. How do I get them back?

    Try logging into icloud.comwith you're apple id and see if you're contacts are there.
    Hope this helps

  • My mac is the OS X 10.8.3.  I tried to update the latest Adobe flash player and kept getting 'Actionlist not found.'  I have uninstalled, enabled and disabled plug-ins and am still unable to download the update and now have no flashplayer at all.  Help!

    My mac is the OS X 10.8.3.  I tried to update the latest Adobe flash player and kept getting 'Actionlist not found.'  I have uninstalled, enabled and disabled plug-ins and am still unable to download the update and now have no flashplayer at all.  Help!
    PS I'm still new to Macs so the more broken down the better.

    Adobe Flash Player 11.8.800.42 is the most recent version from Adobe. It is a pre-release version. I am using it without any noticeable problems.
    The current stable version is Download 11.7.700.169.

Maybe you are looking for