I updated itunes last week and since then it wont open

After the last update iTunes wont open all i get is an error saying iTunes.exe - Entry Point Not Found  The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link library iAdCore.dll.  then after i click ok on it, it says itunes is not installed correctly and to re install it.  I've tried to repair, ive uninstalled it and re installed it, ive even done a system restore and still same.   Any help would be appreciated. 

Can you start Firefox in Safe Mode? http://support.mozilla.com/en-US/kb/Safe+Mode
Can you open the profile manager? http://support.mozilla.com/en-US/kb/Basic%20Troubleshooting#w_8-make-a-new-profile

Similar Messages

  • Every time I try to open Firefox it won't open at all. I updated it last week and since then it has not worked. It won't even open a window. What do I do?

    I'll click on it and the circle will appear like it's about to open, but it doesn't.

    Can you start Firefox in Safe Mode? http://support.mozilla.com/en-US/kb/Safe+Mode
    Can you open the profile manager? http://support.mozilla.com/en-US/kb/Basic%20Troubleshooting#w_8-make-a-new-profile

  • I updated my iphone last week and since I did it will not sync my voice memos

    I updated my iPhone 4s and since then I've been unable to sync my voice memos. Has anyone else had the same problem? Do you know any solutions? I've tried trimming it but it won't work

    Did "everything" include this: http://support.apple.com/kb/HT1808 and this: http://support.apple.com/kb/TS1275, which says:
    Error 23, 28, 29, 40, 1002, 1011, 1012, 1014, 1611: These errors may indicate a hardware issue with your device.  Follow the steps in this article and also attempt to restore while connected with a known-good 30-pin Dock Connector cable, computer, and network to isolate this issue to the device.  If the MAC address is missing or the IMEI is the default value (00 499901 064000 0), this can also confirm a hardware issue.

  • I think someone might be hacking my computer.  I downloaded a free game last night and since then under the shared tab in my finder it says "hp002655a82ea0" and the only info I can get about it is that it is a pc.

    I downloaded a free game last night and since then under the shared tab in my finder it says "hp002655a82ea0" and the only info I can get about it is that it is a pc.  Then under console I see several "stealth mode connection" attempts ti TCP 192.168.1.107:##### from 74.125.225.82.443.  The second number has jumped around and sometimes starts with 192.  I dont really know what those numbers are but how do I stop them from attempting to get through my firewall and kick them out of my shared tab???  I encrypted all my files and made sure all sharing is turned off so I don't know what they are doing.  Thank you very much.

    Mac OS X versions 10.6.7 and later have built-in detection of known Mac malware in downloaded files. The recognition database is automatically updated once a day; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders. In most cases, there’s no benefit from any other automated protection against malware.
    The most effective defense against malware is your own intelligence. All known Mac malware takes the form of trojans that can only operate if the victim is duped into running them. If you're smarter than the malware attacker thinks you are, you won't be duped. That means, primarily, that you never install software from an untrustworthy source. How do you know a source is untrustworthy?
    Any website that prompts you to install software, such as a “codec” or “plug-in,” that comes from that same site, or an unknown site, is untrustworthy.
    A web operator who tells you that you have a “virus,” or that anything else is wrong with your computer, or that you have won a prize in a contest you never entered, is trying to commit a crime with you as the victim.
    “Cracked” versions of commercial software downloaded from a bittorrent are likely to be infected.
    Software with a corporate brand, such as Adobe Flash, must be downloaded directly from the developer’s website. No intermediary is acceptable.
    Follow these guidelines, and you’ll be as safe from malware as you can reasonably be.
    Never install any commercial "anti-virus" products for the Mac, as they're all counter-productive. If you need to be able to detect Windows malware in your files, use ClamXav -- nothing else.

  • My Mac was updated to Ÿosemite OS and since then the PS5 software doesn't open. I need help on this subject please.

    My Mac was updated to Ÿosemite OS and since then the PS5 software doesn't open. I need help on this subject please.
    They error message I get is "An unexpected and unrecoverable problem has occurred. Photoshop will now exit."
    This only started after I upgraded my OS to Yosemite.

    The upgrade has been know to break Photoshop CS5 installs. An Uninstall/Reinstall may be necessary.

  • I have an epson T50 shared network, which is connected to a computer that runs on Windows 7 64-bit. The 10 days Apple has updated the printer drive and since then has been trying to print the following message: / Library/Printers/EPSON/InkjetPrinter2/Filt

    I have an epson T50 shared network, which is connected to a computer that runs on Windows 7 64-bit. The 10 days Apple has updated the printer drive and since then has been trying to print the following message: / Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS/ rastertoescpII failed.
    What should I do?

    The first thing you should do is re-write your post to make it a bit more understandable. I got you have an Epson printer connected to your PC, however after that  your post doesn't make any sense. Are you attempting to print from your iMac, if so then you need to download and install Bonjour for Windows on your Windows machine. Then set Windows so it has printer sharing turned on and then on the iMac simply follow Apple's instructions for adding a printer.
    http://support.apple.com/kb/DL999
    http://support.apple.com/kb/HT4670

  • I just installed an update on my iPhone and since then the choice to repeat music, or not, has disappeared and it automatically plays songs and albums on a loop. Anyone know how to make it play an album or song just once?

    I just installed an update on my iPhone and since then the choice to repeat music, or not, has disappeared and it automatically plays songs and albums on a loop. Anyone know how to make it play an album or song just once?

    Basics from the manual are restrt, reset, restore.
    Have you tried each of these?

  • Just updated itunes 10.5 and now it won't open at all please help me

    Just updated itunes 10.5 and now it won't open at all please help me

    Already a thread about this problem. Check to see if any of the given solutons here work for you.
    https://discussions.apple.com/thread/3381033?start=0&tstart=0

  • Firxfox installed (without me agreeing!) and update and since then I cannot open it at all. RE-installation didn't help. I urgently need Firefox up and running with my bookmarks intact. Thank you

    As mentioned above, when I opened Firefox this morning it installed automatically an update w/o me agreeing and I don't know what was isntalled. Since then I cannot open Firefox. Mozilla Crash Reporter opens and thell me Firefox had a problem and crashed. "We'll try to restore your tabs and windows when it restarts.
    To help us diagnose and fix the problem, you can send us a crash report."
    I press restart Firefox but I always just get the same message. I uninstalled it and downloaded it again, nothing is changing. I urgentlyu need to use the bookmarks as I don't have them in Explorer which I have to use now.
    Thank you

    You need "sysinternal's process explorer", it is free and can replace the Microsoft process explorer, that you get by "CTRL+ALT+DELETE". Either program will allow you to kill the instances of FF that didn't die as they should have, when you closed them. Sysinternal is easier to use, it is a graphic display with many options. Do not push "CTRL+ALT+DELETE" twice unless you want to reboot, that is its default behaviour under Microsoft.

  • Upgraded to v 11.2.1 recently and iTunes has been unstable since then by not opening

    I upgraded to iTunes 11.2.1 recently and since then iTunes mostly doesn't open or stay open.  Instead the ball of death spins around, and I can't do anything other than force quit.  Once in awhile it is stable, and I am able to play music, etc.  I tried upgrading to 11.2.2 but the problem remained the same.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
    SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar at the top of the screen.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

  • When I updated iTunes last week, it asked me for an email and new password.  I misspelled my email.  How do I delete that account and is that what I need to do?

    Before I installed IOS last week, I had to update iTunes.  It asked me to give an email and new password.  I misspelled my email and now I have two iTunes accounts.  Do I need to delete the wrongly spelled one and will that delete the IOS on my phone or just ignore it?

    You should have your stuff separate from your mom's. Delete all the apps downloaded or purchased with your mom's Apple ID and download or purchase them with your own Apple ID. Back up files and data first if possible.

  • I upgraded Firefox last week and since when I want to attach a picture or something to my yahoo-mail, than the whole content of the file ( ordner) will be attached and I cannot add anything since that time !

    I upgraded Firefox last week on my labtop and since when I want
    to attach a picture or textdocument to my email ( yahoo ), than the whole file will be attached and the capacity is to big and I
    can attach nothing ... so what to do ?

    Hi David,
    Thank you for your detailed question. It sounds like the real issue is pdf files. Are there any antivirus/firewalls that might be blocking this specific file type? or are there any preferences in your control panel that might be blocking this?
    Do you have any stored preferences for PDF files in Firefox?
    *[[Applications panel - Set how Firefox handles different types of files]]

  • HT1725 I downloaded the book Sycamore Row last week and when I try to open it on my iPad , i get a message that says: Cannot open "sycamore Row' it is formatted incorrectly, or it is not a format that Ibooks can open. what's up?

    I downloaded the Book Sycamore Row last week on my ipad and when I tried to open it, I got the message that it was formatted incorrectly, or is not a format that ibooks can open? if this is true, how do I get aREFUND?

    You can try deleting the book and reinstall it. There is no reason why the book would be formatted incorrectly - assuming that you purchased this book from the iBooks Store .... And you are talking about the John Grisham novel correct?
    Did you try just closing the iBooks app, restart the iPad and then try again? If you don't know how, this explains how to close an app.
    iOS: Force an app to close - Support - Apple

  • HT4061 I got a brand new iPhone 4S on contract last week and since I've had it it's been over heating and it's turned itself off once and every now and then the screen flickers I just wanted to know is this a common thing as I've never had an iPhone befor

    My new iPhone 4S that I have had a for about a week keeps over heating a lot and its turned itself off once and I couldn't turn it on for over half an hour,also my screen flickers from time to time and I'm not sure what to do as I not had an iPhone before can anybody help me please I would be very greatful.

    No, it's not normal.
    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).
    Frankly though, considering it's new, take it back to Apple.

  • I have LR2. On Adobe I updated to LR2.7 and since then having problems editing images in PS6.

    I select image in LR2.7 to edit in PS6.  It launches PS6 but image does not come through.  It comes up with message "the file could not be edited because CS6 could not be launched" when in fact it has launched CS6 but not the image.
    I have uninstalled LR2 a few times and reinstalled it and when I leave LR2 I can select image to edit in CS6 and it works okay but when I update on Adobe website to LR 2.7 it starts to play up and not work.  What is the problem? 
    Can anyone help with this as I am starting to tear my hair out.  Have had this problem for a couple of months now and cannot do my work.

    Firstly thanks for your responses.
    I have Windows 8 not Windows 7. 
    I have brought down the UAC setting but it still does the same but I just answer yes and it opens CS6 Extended but not the image.  The fact is that when I ask in LR to edit in CS6 it tells me it can't open CS6 but it does open CS6 but not the image.  Even if I ask to "open as smart object in Photoshop" it does not do it.
    No matter where I start Lightroom from it still does the same.  I only used Bridge a couple of days ago for the first time so this problem has nothing to do with Bridge.  When I select an image in Bridge it does bring it up in CS6 when I ask so this works fine.
    In LR/Photo/Edit in, if I select "Edit in Photoshop.exe" it works - it takes the image and gives me the option of edit a copy with LR adjustments etc but if I go LR/Photo/Edit in "Adobe Photoshop CS6" it just opens up CS6 and not the image plus gives me the message "the file could not be edited because CS6 could not be launched" when it has launched.  So should I just use "Edit in Photoshop.exe" or not - I don't fully understand all of this so maybe you could explain in lay terms.
    As I said earlier, it has only recently happened, in the last couple of months.  Before that I had no problems so I don't know where this problem came from.  The only thing I can remember is one day I was playing around with the preferences and maybe I have done something with that in LR and CS6 but I don't know.
    Hopefully this will answer back some of your questions but it has nothing to do with Bridge as per your views in the posts below.

Maybe you are looking for