I updated iTunes to 10.5 and now in my Netgear Stora iTunes server is not working anymore

I updated iTunes to 10.5 and now in my Netgear Stora iTunes server is not working anymore.
Configuration: OSX Lion with Server, iTunes 10.5, latest firmware for the Stora.
Can this be confirmed to be a bug introduced with 10.5 ?
I also saw some people mentioning the same problem on Synology NAS.
Seems like the 10.5 uodate broke something.

Definitely seems to be a cross-platform bug in iTunes 10.5 concerning all NAS disks. Shared libraries on network drives worked fine under 10.4.1, but now there is just an endless loading cycle with no error message or time-out. There is a bit more about it in this thread.
Martin

Similar Messages

  • I updated my Itunes the other day and now, when clicking on the itunes icon, the program does not open?? I have tried uninstalling and reinstalling, resetting the computer, checking permissions, running as adminstrator.. nothing is working?? Help!!

    I updated my Itunes the other day and now, when clicking on the itunes icon, the program does not open?? I have tried uninstalling and reinstalling, resetting the computer, checking permissions, running as adminstrator.. nothing is working?? Help!!

    Amazing steps you've done so far! The great news is this is very unlikely an issue with your iPhone.
    I've run into a similar issue lately as well. I narrowed it down to one song that was causing 30 songs not to sync. I removed the song from the sync list (unchecked it) and all 29 songs were able to sync.
    You may be running into a similar issue. This may be a problem with this version of iTunes, an issue with one song or a group of songs; hard to know for sure. It's important to narrow down and isolate the cause. Most imporantly get that music back on there!
    The way to narrow down the casue add just a few songs at a time (even 1, just to get that first sync finished). Manually syncing is what you'll need here.
    Plug in your iPhone, on the Summary screen (shows a picture of your iPhone, the iOS version, Restore iPhone....; etc). Under the Options area at the bottom choose to Manually Manage Videos and Music then choose Apply in the lower right. The music that's on your iPhone now should be removed from your iPhone now. You're now able to sync music manually.
    The link below explains how to drag the songs from the iTunes library on the computer on to your iPhone which will start the sync. Add just one song just to see if you can get 1 of those hundreds of songs on there. If you can, awesome! Keep adding until you find the song or group of songs that are causing this issue.
    http://support.apple.com/kb/HT1535
    Please let me know how things are going.
    Cheers!

  • I have just updated to Pages 5.1 and now the templares which I have saved do not displat the header and footer which they were saved with in the previous version.  How can I have the header and footer included when I open a template?

    I have just updated to Pages 5.1 and now the templares which I have saved do not displat the header and footer which they were saved with in the previous version.  How can I have the header and footer included when I open a template?

    That is becuase Pages 5.1 has numerous unnounced surprises for the unwary user.  Among the surprises:
    - it strips out images from headers and footers without warning
    - it strips out bookmarks without wanring (yes, all those bookamrks you laboriously put into a document: poof! Gone.)
    - it strips out alternating left/right margins, without warning.
    There are many more suprises, as you'll see from glancing through these discussions. They fall into two main categories: things that are present in version 4.3 but that are missing in 5.1, things like
    -mail merge
    -meaningful Applescript/Services support
    -non-contiguous text selection
    -ability to set defaul zoom
    -ability to see comments while editing
    -ability to print comments
    -ability to read RTF files
    -ability to drag in hyperlinked ted from a browser
    These about about 90 other features are gone.
    Then there are the bugs.  Hyperlinks do not reliably export to a PDF file any longer. There have been multiple problems with printing report. Some fonts place stray characters in the headers.  Many reports of the program crashing, courrupting files, etc.
    Fortunately for you, the previous version of Pages is still on your system.  Export any documents you may have created or edited with Pages 5.1 (another great surprise: files created with version 5.1 cannot be read by any previous version of Pages: not just 4.3 but even 5.01!).  Then trash 5.1 and use 4.3 until (unless?) it is stable and has a reasonably robust feature set.

  • Just updated IPad 2 to IOS8 and now have no 3G service  have WIFI but not 3G  Says No Service at top

    Just updated IPad 2 to IOS8 and now have no 3G service  have WIFI but not 3G  Says No Service at top

    I am really sorry I upgraded so quickly to ios8.
    Not only do I not have my ATT but my pics "events from mac" are in some unknow order.  I have 220 folders that are not alpabetized.  I cannot find any pictures.
    On the Macbook Air the events are perfect, all in alphabetic order.  When they transferred they are mixed.  Faces are mixed now.
    THis new operating system is horrible.  How do I go back to 7.
    And the ipad 2 is so slow now.  There are no positives!

  • I have purchased the Adobe Creative Suite 4 and now my first dvd of the software doesn't work anymor

    I have purchased the Adobe Creative Suite 4 and now my first dvd of the software doesn't work anymore. My computer doesn't want to read it anymore. I want to mention that I also tried on some other computers and still the problems continues. How can I solve this? On the Adobe webpage I can't find anymore the download for Adobe CS4. Thanks. Marius Lupu

    You can download the software from http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html and can serialize it with the serial number you have.
    NOTE:- READ THE INSTRUCTION PROPERLY TO AVOID ANY ERROR.

  • My ipod recently cracked and now the right side of the touchscreen is not working. I can't even unlock the touch screen. How do I fix this problem if it even can be fixed?

    My ipod recently cracked and now the right side of the touchscreen is not working. I can't even unlock the touch screen. How do I fix this problem if it even can be fixed?

    You can pay to have it repaired.

  • I downloaded CC 2014 and now my image proseccer on 2 computers does not work on either

    I downloaded CC 2014 and now my image proseccer on 2 computers does not work on either

    You may try these options:
    Credit Kappy.
    Ciao.

  • Just downloaded Yosemite and now the swipe feature on my mouse does not work. Why?

    Just downloaded the new OS onto my iMAC and now the "swipe" feature on my mouse does not work, i.e. I can't go back and forth between web  pages.  Is this a function of the new OS?

    What kind of mouse do you have? USB? Have you tried to plug it in - try all the USB ports (maybe there is a problem with one). It should automatically detect it.

  • Hello! I have installed Photoshop on PC WIN 7 64bit. When I store first time a Photoshop docuument, it works fine - after re-opening and doing changes I trying again to store it - it does not work anymore! First it does not accept the name (message "It ca

    Hello! I have installed Photoshop on PC WIN 7 64bit. When I store first time a Photoshop docuument, it works fine - after re-opening and doing changes I trying again to store it - it does not work anymore! First it does not accept the name (message "It can not be stored because the nam is invalid" With 2. trial it tells me that the data is blocked and I don't have the rights - and I should chenge them. But I am working as the Admin on my PC - and each trial to change the rights of the data is as well not possible because of missing rights - even I am Admin! I must always store the data with a new name, then it works, but I also cannot remove the old datas or shift them into the waste paper - because of no rights! -- sorry for not perfect english, I am German native speaker! Tahnks a lot for help!

    Hi,
    I am using a Nvidia 4200M adapter in my Laptop, Driver 266.96, Direct X 11
    In my desktop I am using an ATI XFX 6950, latest revision drivers (I am not at home right now so I cant get that info).
    The issue I did describe above, but it was a long explanation.
    In some flash games the game files load initially and get as far as the "click to start" button. Then the flash area usually goes either all white or all black (usually depending on the falsh game default background color) and then it stays that color. Cant see anything after hitting start (usually most games have an intro video or animation before the game starts, but I cant see any of it.
    For the very few games that do start, the flash game or application does not seem to work correctly in that when the rare game starts, it wont save any game files or save files to the pc and so if I exit the game (navigate away to another page or close browser) and then later come back, even though I click the option to save games (and ensure that the flash application slider shows it can save files and lots of space) it does not save and I have to start from the beginning all the time.
    More explanation I gave above.

  • My ipad mini is totally drain and after plug it to regain the power its not working anymore.can somebody knows how to make my ipad work again

    my ipad mini is totally drain and after plug it to regain the power its not working anymore.can somebody knows how to make my ipad work again

    Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • I do have wifi connection but no internet, how is this possible? I logged in to the internet at my friends place and when I got home my own internet was not working anymore

    I do have wifi connection but no internet, how is this possible? I logged in to the internet at my friends place and when I got home my own internet was not working anymore

    This is possible to be connected to WiFi but not internet.
    You connect to your modem/router via WiFi and whether it is connected to the internet or configured properly to route the internet to WiFi devices is a different story.
    Now if you've already reset your WiFi (try disabling and enabling) and perhaps even restarting your MBP
    Then make sure that your modem/router is connected to the internet.
    You can try any other device, lights on the modem/router or use Eth cable to test.
    Report back your findings.

  • TS1567 I updated my iphone 4s os and now it wont synch with itunes. I have installed the latest version of itunes on my pc and have tried restarting the apple mobile device but it is still not working Any suggestions?

    I updated my iphone 4s and now it wont sych with my itunes. It goes through the process and says sych comlete but then nothing is updated on my phone. I have tried restarting everything and restarted the apple mobile device but nothing seems to work. Please help!!!!
    Claire

    Did "everything" include this: http://support.apple.com/kb/HT1808 and this: http://support.apple.com/kb/TS1275, which says:
    Error 23, 28, 29, 40, 1002, 1011, 1012, 1014, 1611: These errors may indicate a hardware issue with your device.  Follow the steps in this article and also attempt to restore while connected with a known-good 30-pin Dock Connector cable, computer, and network to isolate this issue to the device.  If the MAC address is missing or the IMEI is the default value (00 499901 064000 0), this can also confirm a hardware issue.

  • IPad unresponsive after iOS 8.02 update, doesn't show up in iTunes, hardware reset (home and standby buttons both held down for ten seconds) not working

    I have a 32GB iPad mini that was purchased new in June of this year. A little while ago, I started the iOS 8.02 download while it was plugged into a wall socket using an official apple wall to USB plug and an official apple thunderbolt cable. I then left for 25 minutes to get some food.
    On coming back, I discovered the iPad with a black screen showing the apple logo. I thought this was just an ordinary part of the update, it was restarting or something after installation, so I thought nothing of it. Then, after another minute or two, the screen flashed blue and then went completely black.
    Puzzled, I waited for another second and the apple logo reappeared as if the iPad was restarting again. However, after a few minutes, this happened again. This has been going on for the last half an hour, and I was wondering has anybody experienced this before.
    As I stated in the title, it won't show up in iTunes, and the hardware reset or whatever it's called doesn't work. Also, bear in mind I had issues syncing it with iTunes the night before and it also seemed to crash a few times last night, restarting the iPad and bringing it to the blank screen with the apple logo for a few seconds before going to the lock screen. That didn't happen at all this morning though.
    The iPad is not jailbroken, however, it does have licenses for gba4iOS, which is still installed on it, and a VPN license installed on it by the Hola app, which I deleted but never bothered deleting the license for. Any help would be greatly appreciated.

    Hi Colin how are you?
    I updated my IPAD yesterday and have the exact same problem.
    Itunes does not recognize my ipad. Home and standby also doesnt work.
    Also have the blue thing every few minutes and the apple logo but it never goes beyond it.
    Have you solved the issue?
    IPAD AIR

  • I had to get a new keyboard and now the keys in the upper row are not working appropriately. How can I fix this problem?

    My keyboard stopped working so I went to the apple store to replace it with another one. Now I am back home and the keys at the very top are not working correctly (volumn  F12 shows the dashboard, F11 takes the screen up and away, F8 pause button shows spaces, etc.). What should I do to correct this problem - I assume I probably need to download some type of softwear but what? I have a Mac OS X  Version 10.5.8 desktop - 2.66 GHz Intel Core 2 Duo processor.

    All new keyboards need Snow Leopard 10.6.8 and above for full functionality.
    Rather short-sighted of Apple perhaps, but that seems to be a trend these days.
    I'm afraid the only fix is to upgrade to SL. Personaly, I'd take it back and get a refund and seek an older keyboard or a third-party one elsewhere.

  • I participated in my company's video conference last week, and now the camera on my Macbook Air will not work for facetime or skype.  Help!!

    I participated in video conference with my company last week, and now I cannot use Facetime or Skype because the camera is not working?  Help, I cannot find the button to free up my camera!! 

    If you installed some kind of software to take part in the conference, remove it.
    Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
    Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
    I never install system modifications myself, and except as stated in this comment, I don't know how to uninstall them. You'll have to do your own research to find that information.
    Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmymac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button. The uninstaller might also be accessed by clicking the Customize button, if there is one.
    Back up all data before making any changes.
    You will generally have to restart the computer in order to complete an uninstallation. Until you do that, there may be no effect, or unpredictable effects.
    If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
    Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" such as "AppCleaner" and the like that purport to remove software.

Maybe you are looking for

  • I am trying to download, install, and use Lightroom and Photoshop...

    I just want the straight out garden variety programs, install on hard drive, run offline - on local PC only - pay the price for a perpetual license, never have to connect this computer to the internet again. But I keep being railroaded into buying pa

  • Session variables being lost in IE7

    has anyone else experienced, heard of, or solved this issue? I have a web app thats been running fine for 5+ years and using session variables (i'm currently using CF8). When a user goes from page to page the session is carried with them so i know th

  • Command to Stop and Start the SBO Mailer Service

    Good day, I have an issue on my SAP server (SAP 2007 SP01 PL10) where the SBO Mailer server is intermittently stopping.  This is causing Emailed Alerts and emails from SAP to stop working. I want to create a Scheduled Task in Windows to run a batch f

  • Trouble with XmlBean parameters

    Hello, (WLS8.1SP2) I've read all I can find about this, even downloaded the WLSXmlBeansApp. The problem seems to be that <clientgen> is generating Java code that will not compile. F.E. I'm using <xmlbean> with the <extension> to generate the XmlBeans

  • How to add music from ipod to brand new laptop

    I just bought a new laptop and now downloaded itunes, i was needing to know how to add my music from my ipod touch to my itunes library?