I updated my 4S to iOS 6, and now the phone has died (was fully charged). Is there a reset button on the phone?
Not sure what just happened. The phone was fine, I put it down for 10 minutes, and now it's completely dead.
I reset the phone by holding down the power button and the back button until the apple icon appeared on the screen, and it has been working since.
Similar Messages
-
I updated my ipad to ios 8 and now it just has the apple logo and it w3ont do anything
my ipad asked me to update and i did and now all i havve is the apple logo and it wont do anything else
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
I just updated my iPad to iOS 5 and now can't send email- I have tried the obvious but no luck. Any suggestions?
Usually 'authentication required' means that you need to submit a username (or e-mail address) and password to the e-mail server, when sending a message. This logic is not different between Outlook and Thunderbird, and even with the latest and previous version of Thunderbird.
Of course you can try the previous version again to see if it solves the problem, although you'll be less secure because you would be missing the latest fixes.
If you'd be willing to get back to Thunderbird, say if your frustration level with your new app would increase too much, please see our article [https://support.mozilla.org/en-US/kb/cannot-send-messages cannot send messages] for further help.
In all other cases I'd appreciate it if you could mark this as answer so we know you don't need further help. -
I now have a useless $700 phone. Updated iTunes to latest version (and can't get it to revert back to an earlier version), updated iPhone (iPhone5) to iOS 7 and now it won't talk to iTunes, nor will it connect to my WiFi. What should I try now?
If it won't talk at all to iTunes, you can hold down the power and home button for 10 seconds, it will power off, this is ok, then let go of the power button while holding the home button until iTunes sees it as a device in recovery mode. You can try to reinstall iOS7 and then restore.
-
I updated my 4s to IOS 8 and now it won't automatically connect with my Ford SYNC. I have to turn the phone off and then on again for it to connect.
Why is this? My husband's 4s is still on IOS7 and it still connects automatically.I do not know if this will help.
For a limited time Apple will allow you to downgrade to 7.1.2. Hurry do not wait.
See brownox second post here:
Are there known problems with hdmi screen display and iOS 8?
and
http://www.gottabemobile.com/2014/09/17/downgrade-ios-8-to-ios-7/ -
i updated my ipad to ios 8 and now my ipad is locked asking for activation when i put it doesnt accept my apple id do you have a solution?
Did you by this iPad new? Or used? If it was a used iPad, you'll need the Apple ID login for the original owner. If you bought it new, contact AppleCare with proof that you are the original owner and they may be able to help you.
-
Just updated my iPad with iOS 7 and now internet does not work anymore, how to fix if???? Desperate
Just updated my iPad with iOS 7 and now internet does not work anymore, how to fix if???? Desperate
Try resetting your iPad:
Double click the Home button. Slide up with one finger on ALL your apps to close them.
Then, Press the Sleep/Wake button + Home button and hold 15 seconds or until you see the Apple logo.
This will reset your device without erasing data, apps or settings. -
I bought an iphone 5 from one of my friends and unluckily I had yet lost his contact, I had update this iphone to IOs 7 and now it's be locked at iCloud because there was no password . Actually I dont know what I must do for its. Experts, please help me!
The friend who sold it to you needed to clear his Apple ID off the phone before he sold it to you. Of course if it wasn't his phone in the first place then he could not do so. He is your friend but you don't know where he is?
There is nothing that will help you short of getting the password for the Apple ID from your friend. If you cannot obtain that there is no workaround. -
HT201269 I updated my 4 to IOS 6 and now I cant find my phone contacts?
I updated my 4 to IOS 6 and now I cant find my phone contacts?
Check your iCloud settings to make sure you have your contacts synced.
-
I have updated my 4s to iOS 7 and now cannot add events to my calendar or my reminders. Anyone else having this issue and know how to fix it?
I have a similar problem in Reminders....there is no + button to add events. In Calendars it is there.
-
I updated my iPad to iOS 7 and now I can't sign into iMessage. Why?
I updated my iPad to iOS 7 and now I can't sign into iMessage. It keeps saying can not sign in check network connection? But my internet connection is full and everything else works fine.
I have tried to back it up thru itunes with the sync mail box checked and it is still not there
-
I recently updated my IPhone to IOS 7 and now it will not connect to my iTunes
I recently updated my IPhone to IOS 7 and now it will not connect to my iTunes.
You updated you're phone to 7.0.6? Thats impossible since you can only update to the newest OS version Apple released which is currently 7.1.1. Unless you updated before April 22 and just now posting you're question.
-
Just updated my 4s to iSo 6 and now the phone does to pair with my Lexus anyone have/solve this issue? Is it a firmware problem with the car?
Was it pairing before the iOS update?
If so, delete the pairings in the device and the car, then try again.
If it was not, the issue is most likely the car. -
I just updated my 4s to ios 7 and now i can't acesss any mail.
I just updated my 4s to ios 7 and now i can't acesss any mail. It comes up with the screen to pick which ip provider you use and when i try to set up my gmail account it says it is already there.
I have tried to back it up thru itunes with the sync mail box checked and it is still not there
-
i updated to ios 7 and now the battery does not stop charging any ideas, or have to wait for update? thanks
To show the battery percentage used go to settings
from there click general scroll to usage and select
scroll to bottom of page for battery usage select on.
This will show the icon battery and the percent numbers on the top right.
When phone is connected to an outlet sometimes it does not always show complete charge. I do not understand why but it is what it is.
FYI I sent reply to you not to deggie. You can have your own satisfaction to reply direct.
Maybe you are looking for
-
Import PO for Vendors on a Free Trade Zone
Hello Gurus, A Free trade zone is an area inside a Country where companies trade with foreign and local clients, but when working with local clients an import process must be made, i.e. customs, nationalization, etc. When creating a PO for a plant in
-
Combining two source fields in Import Manager
Hi, I am trying to combine two source fields say fld1 with 5 digit and Fld2 with 3 digit so that combined fld3 of 8 digit can be mapped to a 8 digit field in destination MDM side. Any suggestion how to do this is highly appreciated Thanks, -reo
-
I want to query oracle database from sql server can anyone tell steps 2 fol
i want to query oracle database from sql server can anyone tell steps 2 followed i tried with linked servers but it is throwing errors can anyone hepl in this regard The operation could not be performed because the OLE DB provider 'MSDAORA' was unabl
-
Hi All, I have 2 queries with same formula in both. One is Bex and other is Web query. In the report output, I am doing Calculate ->Result as ->Summation. Result is displayed correctly for Bex query. Where as the result is correct for ONLY few rows i
-
Using a MacBook Pro running MacOS X 10.4.9, we are unable to even see an XRAID that was initialized as a RAID 5 with RAID Admin with two separate arrays. We were unable to see the disks or volumes in Disk Utility, but could see the disks in RAID Admi