I updated my ipad 2 to ios 7 but now the speaker is not working

I played the song on music although the. Song started but I can't hear it...I shouldn't have updated it to ios 7
Now pls help me..:

I tried this ..it worked
You can try this reset procedure to see if it helps:
Double click the Home button. Slide up with one finger on ALL your apps to close them.
Then, Press the Sleep/Wake button + Home button and hold 15 seconds or until you see the Apple logo.
This will reset your device without erasing data, apps or settings.

Similar Messages

  • After updating my iphone 6 to ios 8.0.2, the iphone is not working at all!!

    after updating my iphone 6 to ios 8.0.2, the iphone is not working at all!! the apple logo shows up for a few seconds. then the screen goes red !! after it restarts and it do the same!! please help.

    Well, just for future reference, any time you do an iOS upgrade, it is a good idea to back up your device just prior to doing the download. You can back it up to iCloud or to iTunes. Personally, I prefer to back it up to iTunes, and then to do the download via iTunes as well. Doing a Wifi download can, by the very nature of the OTA environment, run into more issues than a hard-wired one via iTunes.
    If it is just a version release (like 8.0.1, or 8.0.2), then I might download it via Wifi, since the content is not likely to be very large. But for any major new release (7 to 8, etc.) it is always a good idea to do it via the USB cable rather than OTA.
    I would also suggest that you set up your device to do automatic iCloud backups. Whenever it is turned on (i.e., not manually powered off - it can be "asleep"), plugged into a power source, and connected to Wifi, it will do an automatic backup every 24 hours. Mine usually backs up at night.
    But even with my iCloud backup in reserve, I still did an iTunes backup before I upgraded to iOS 8. I like having the extra security of that second backup to choose from, should I need it. Here is a support article comparing the two types of backup:
    Choosing an iOS backup method (Should I use iTunes or iCloud to back up my iOS device?)
    Sorry you lost your stuff. Hope then next update goes better for you!
    Best of luck,
    GB

  • I have just update my mac mini server to OX Yosemite, but now the iTunes is not working at all.

    I have just updated my Mac Mini Server (Mid 2011) to OS Yosemite ver 10.10, after the update, iTunes is not working, and i have tried to reinstall iTunes over and over again but it was not successful , please advise if you have a solution or share similar problems. Thank you.

    You have to upgrade to 10.6.8 to be able to download iTunes 10.7 or 11.  The 10.6 Snow Leopard DVD is in the Apple online store. You can get it for $19.99. You will need to be running 10.6.8 to access the App Store to order Lion or Mountain Lion. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    First we need to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up check the Model Identifier and post it back here.
    The Early 2006 model 1,1 Core Duo can only run a maximum of 10.6 Snow Leopard.
    The models Late 2006 Core 2 Duos 2,1 through Early 2008 4,1 can only run a maximum of 10.7 Lion.
    The Late 2008 model 5,1 Aluminum Unibody through the Mid 2010 White Unibody model 7,1 can run 10.8 Mountain Lion.

  • I updated my iPhone 4S to iOS 6, but now the Wi-Fi seems to be disabled.

    I tried connecting to my Wi-Fi network, but instead of getting connected, I'm taken to a page that says, "Log in" and it shows the apple website. On that website, it says, "Hmm, we cannot find the page you are looking for." It's frustrating and I would like to know: is this happening to anyone else? Why is it happening? Will it be on going? Thank you very much for your answers.
    P.S: It also says something about a hotspot...? I don't know why.

    I can't tell you WHY this worked but I'll share just in case...
    I had the same problem.  No sound, the volume control buttons did nothing.  The sound icon would appear but no bars indicating the sound level.
    My phone was NOT on mute, but I flicked the mute button anyway. 
    I don't know why or how, but that made the sound come back and the volume control buttons start working again.
    (Just before this, I realized all my texts were gone - they came back with a reset but still!)

  • I have the new IOS 5 but now the music doesn´t work why?

    Have anyone the same problem? Or an answer for this problem?

    Take it back for exchange. It has a 1 year warranty.

  • After update my iPad 2 with IOS 6.0.1 the botton mute and sound + doesn't work...any solution for this??? Thanks

    After update my iPad 2 with IOS 6.0.1 the botton mute and sound + doesn't work...any solution for this??? Thanks

    There are numerous reports of this issue happening on iPhones. It may be a glitch that will need a new update. Some find that a full shut-down and restart fixes that problem, but not always.

  • Trying to update my iPad 2 to iOS 5 but it keeps failing.

    I have been trying to update my iPad 2 to iOS 5 but it keeps coming up with "The iPad could not be restored. An unknow error occurred (-1)". I've been trying since Thursday but still no joy. I've tried doing it through two different PCs as well. My iPad just tells me that it needs to connect to iTunes. I updated my iPhone software with out any issues.
    I went into my local iStore but they wanted £12.00 just to restore it. I was advised that they would do it for free in an Apple Store so I'm guessing that I'll have to pop into one in London during the week.
    Is anyone else having these problems / been able to resolve it?

    Are you trying to update via wifi or connected to your computer?
     Cheers, Tom

  • I've tried to update my ipad 2 with IOs 6 but it was not possible. An error message always appear after some time during e download. Is there an solution?

    I've tried to update my ipad 2 with IOs 6 but it was not possible. An error message always appear after some time during e download. Is there an solution?

    Are you trying to update via wifi or connected to your computer?
     Cheers, Tom

  • After trying to update my iphone 5 to ios 7 via itunes my phone will not work at all, all i have is an itunes logo and cable logo on the screen HELP!!!!

    after trying to update my iphone 5 to ios 7 via itunes my phone will not work at all, all i have is an itunes logo and cable logo on the screen HELP!!!!

    you'll want to restore it using itunes and recovery mode
    http://support.apple.com/kb/ht1808

  • TS3694 I performed an iOS 7 software update on my iPhone yesterday, and now the phone is not working at all. The iPhone screen shows to connect to iTunes to restore. I've have done this, and still the iPhone is not working. What going on?

    I performed an iOS 7 software update on my iPhone yesterday, and now the phone is not working at all. The iPhone screen shows to connect to iTunes to restore. I've have done this, and still the iPhone is not working. What going on?

    I have no idea what may have caused your MacBook to stop working, but from your description it kind of sounds like it may have started before you ran Software Update and installed the new Apps. Just the general slow feeling and bugginess is what tips me off. You said that you weren't sure if you had closed all open windows, that doesn't matter if the computer restarts itself. It automatically closes all other open applications when restarting.
    As to your data being retrievable, if when you take it in they do a fresh install of the OS, then no, it will not be unless you want to pay several thousand dollars to a software retrieval company.
    I am glad to hear that you have taken into the Apple Store to get it fixed, and that you have all of your purchased music backed up to your iPod. You should be able to just transfer it all back to iTunes once you get your computer back should it be necessary.
    As a side note, the proper place for this topic would probably in the MacBook forums, not iTunes since there is no evidence that iTunes started the issue.

  • I have just updated my ipad  to 7.0.2  but now when I want to watch a download  on BBC IPLAYER when I am off line it will not play the download.  I can only watch the download when I am on line

    I have just updated my ipad  to 7.0.2  but now when I want to watch a download  on BBC IPLAYER when I am off line it will not play the download.
    I can only watch the download when I am on line . The funny thing is I can watch it then if I turn off my modem untill I shut down my i pad . Before the update I didnt need to be conected to watch my down load . Can any one help please ?

    Here you are "the strange draft logos"...

  • HT1386 so i just updated my iPhone 4 to the iOS 7 but now the screen on my phone is saying "Could Not Activate Phone" So what should I do i need this fixed now

    so i just updated my iPhone 4 to the iOS 7 but now the screen on my phone is saying "Could Not Activate Phone" So what should I do i need this fixed now

    Can someone please tell me what to do. I need for something in 30 minutes

  • I have updated my ipad to version 7.1 but in the process all my bookmarks and favourites have been deleted

    I have updated my ipad to version 7.1 but in the process all my bookmarks and favourites have been deleted.
    I tried switching off and turning back on again but they are still missing, please can someone help?

    Go to Settings>WiFi>Network Name - tap the blue arrow next to the name and then tap Forget this Network in the next window. Restart your iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Then go to Settings>WiFi - find your network again - enter the password and see if you can get online.
    Or reboot your router - unplug it for 30 seconds and then plug it in again.
    Or go to Settings>General>Reset>Reset Network Settings. You will have to find the network and enter the password again.

  • I updated to ios 7 and now the battery does not stop charging any ideas, or have to wait for update? thanks

    i updated to ios 7 and now the battery does not stop charging any ideas, or have to wait for update? thanks

    To show the battery percentage used go to settings
    from there click general scroll to usage and select
    scroll to bottom of page for battery usage select on.
    This will show the icon battery and the percent numbers on the top right.
    When phone is connected to an outlet sometimes it does not always show complete charge. I do not understand why but it is what it is.
    FYI I sent reply to you not to deggie. You can have your own satisfaction to reply direct.

  • HT201365 I downloaded the IOS 7 for my iPhone yesterday, asked for a password which I put in , now the password will not work, and I have disabled my phone . HELP

    I downloaded the IOS7 on my iphone yesterday. Asked for a password, put it in. Now the password does not work and my phone is now disabled. What can I do?

    Hi there Martha250,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    -Griff W.

Maybe you are looking for

  • How can I display all my films in iTunes, on my iPhone 4S?

    How can I display all my films in iTunes, on my iPhone 4S? I have 10 films in iTunes and only 8 are displayed on my iPhone. All 10 films are Digital Copies bought with Blu-ray Discs and have been added to iTunes.

  • 6110 and bluetooth hands free

    Dear all, I have a 6110 which I am very happy with but I have a nagging problem. Previously I had a 3210. When I paired it (3210) with my blue ant bluetooth hands free and walked out of range of the device (in my car) I would hear a beep on the phone

  • Updating unique reference field (ASP)

    I've created an app using ASP (not ASP.NET) I'm writing back to an AS/400 and unfortunately I'm not able to have an autonumber field due to some constraints on the way things work on the AS/400 (don't ask me why I don't know!!! I'm just been told thi

  • Installing oracle 9i in windows 7

    Hi, Can anyone help me how to install oracle 9i in windows 7.I tried installing and i got some errors and the installer closed

  • Both blocking and non-blocking io

    I'm wondering if this scenario is possible with the new nio classes: I have a caching server. Clients connect to the server and occasionally send requests for objects. I'd like to use the nio non-blocking APIs to detect that there is a read pending o