I updated my ipad to ios 8 and now it just has the apple logo and it w3ont do anything
my ipad asked me to update and i did and now all i havve is the apple logo and it wont do anything else
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.
Similar Messages
-
I have downloaded ios 6 on my ipad 2 but it wouldn't install and now my ipad won't work (just has the apple logo on the screen periodically) and it won't reset. Any ideas folks? Thanks in advance.
Try restoring the device using iTunes. Connect the iPad to your computer and when iTunes opens, select your device on the left side, then click on the summary tab, then click on Restore.
After the device is restored you will have an opportunity to restore from your backup. Restore from the backup when you are done and then sync with iTunes.
if that doesn't work, try recovery mode.
http://support.apple.com/kb/ht4097 -
Hi
I've just reset my iPhone 4s as I was planning to sell it on. After the normal stuff you see on a reset I've been left with a phone that just has the apple logo on the black screen and it appears to be frozen and wont do anything?? any ideas?
I've tried holding down top button and round button which makes it go off but as soon as you push top button again it comes back and again its frozen.
Thanks for any ideas in advance?You need to put your iPhone into recovery mode to restore it: If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
-
I tried to restore my iPhone 3G by doing so on the iPhone but now it just displays the Apple logo and refuses to proceed any further. Any suggestions?
Hello, Spedellen.
Thank you for visiting Apple Support Communities.
When experiencing issues restoring an iPhone, here are the best articles to go through. If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Cheers,
Jason H. -
I was trying to do an update on my Ipad2 and it looked like it was getting ready to load, but then I received an error message. Now my ipad is not working at all. The only thing that appears on the screen is the apple logo and a loading bar. I tried to turn it off, but it just wont do anything. Help!
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
My phone is frozen and it just has the apple logo on it what do i do
my phone is frozen on the apple logo.. how do i unfrozen it
Connect to Wall Charger and Reset, hold both Home and Power buttons until the iPhone begins to restart. Usually takes less than 20 seconds of holding both buttons.
If still problem, try reset again. If you decide to Restore Firmware with iTunes, then with iTunes open on computer connect iPhone to computer. Then hold both Home and Power buttons until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds of holding both buttons. Restore the Firmware. -
im assuming im going to just need to go to the apple store and get it fixed?
Was the iPhone factory unlocked?
If so then do a search of these forums for the fixes for Sim card errors; there are a few people with ideas on how to fix it.
If it was unlocked after you bought it, then you will not be able to update the software.
And it will have been Jail broken, which cannot be discussed on this forum. -
I done the update, it then said to plug into itunes - once i plug it in it crashed and now just has the apple logo on. it wont load switch on or off. Please help!!
Restart computer. Open iTunes on computer. Connect iPhone to computer with USB Cable. Hold both home and power buttons until iTunes recognizes iPhone in Recovery Mode. This usually takes about 20 seconds of holding both buttons. Click the Restore button of iTunes.
-
I just updated my iPad to iOS 5 and now can't send email- I have tried the obvious but no luck. Any suggestions?
Usually 'authentication required' means that you need to submit a username (or e-mail address) and password to the e-mail server, when sending a message. This logic is not different between Outlook and Thunderbird, and even with the latest and previous version of Thunderbird.
Of course you can try the previous version again to see if it solves the problem, although you'll be less secure because you would be missing the latest fixes.
If you'd be willing to get back to Thunderbird, say if your frustration level with your new app would increase too much, please see our article [https://support.mozilla.org/en-US/kb/cannot-send-messages cannot send messages] for further help.
In all other cases I'd appreciate it if you could mark this as answer so we know you don't need further help. -
I recently updated my iPad to iOS 8 and still checking on the settings. When I happened to swipe on my screen for too long, it zoomed and I can no longer see what's on it. I can not even unlock it. I can not use my iPad anymore. What shall I do?
Try double tapping with three fingers and see if that reduces the screen image. If it does, unlock the iPad and go to Settings>General>Accessibility>zoom>Off. If double tapping with three fingers doesn't work, try triple tapping the home button instead.
-
Just updated my iPad to iOS 7 and it doesn't accept my password so my iPad is disabled. Information on unlocking using iTunes asks me to turn off Find my iPad. This is impossible as I can't access my iPad. Any ideas?k
Try reboot ur ipad... press home and power buttons until apple logo com up and then release it.
-
i updated my ipad to ios 8 and now my ipad is locked asking for activation when i put it doesnt accept my apple id do you have a solution?
Did you by this iPad new? Or used? If it was a used iPad, you'll need the Apple ID login for the original owner. If you bought it new, contact AppleCare with proof that you are the original owner and they may be able to help you.
-
Just updated my iPad with iOS 7 and now internet does not work anymore, how to fix if???? Desperate
Try resetting your iPad:
Double click the Home button. Slide up with one finger on ALL your apps to close them.
Then, Press the Sleep/Wake button + Home button and hold 15 seconds or until you see the Apple logo.
This will reset your device without erasing data, apps or settings. -
I updated my iPad to iOS 7 and now I can't sign into iMessage. Why?
I updated my iPad to iOS 7 and now I can't sign into iMessage. It keeps saying can not sign in check network connection? But my internet connection is full and everything else works fine.
I have tried to back it up thru itunes with the sync mail box checked and it is still not there
-
I updated my Ipad to IOS 5 but now my Ipad is blank. I backed up to Itunes but can't find my back up info.
Yes, there are two utilities that I use to perform this task, SuperCrazyAwesome’s iPhone Backup Extractor which is a free utility, and addPod’s Juice Phone, also free. Neither solution will work if you have encrypted your backup files. Both allow you to access the backed up data as if the iPhone was connected to your Mac.
Maybe you are looking for
-
New Macbook Air will not connect to 802.11n, but my old 2011 model will
I have just bought a new MBA 13", i7, 8 GB RAM, 256 GB SSD. When I connect to my home network I see it as a 802.11n network, but as soon as I log on, I only have 802.11g connection. I still have my old 2011 MBA, and it connects to the n-standard just
-
New MacBook and Old Hard Drive
I had a MacBook 2 and I have now bought a new MacBook 4. As I sold my old one instead of using transfer assistant I have simply swapped the hard drives. Everything seems to be fine except Time Machine won't recognize the old backups because the MAC a
-
IMac 24inch 2.4GHz Logic Board Core 2 Duo
I have a white 24 inch Imac 2.16 ghz computer got in 2007.Having problems with mouse cursor not showing on monitor takes 10 to 15 seconds to come back.I think it is the video card aNvidia GeForce 7300GT.Found info on google on this problem in some si
-
ICal subscriptions won't update in iOS7
Since updating to iOS7, some iCal subscriptions don't update, TripCase, particularly. Suggestions?
-
Dragon Dictate for iPad2 in New Zealand ?
I would really appreciate feedback, confirmation and assistance with the following query. I have recently just got an iPad 2 and live here in New Zealand and really want to get Dragon Dictate, however, when I go to any link on the Internet and then g