I updated my Ipad with IOS7.1.1. After more then 12 hours, the screen still show the Apple logo. How can I shut it down or reboot it?

I updated my Ipad with IOS7.1.1. After more then 12 hours, the screen still show the white Apple logo. How can I shut it down or reboot it?

It works really well.
Thank you for your tip.
Alain

Similar Messages

  • HT4623 i disconnected my iphone 4 while it was updating and now its frozen, the screen is showing a apple logo and a loading bar which has been for 9hrs now. please help

    i disconnected my iphone 4 while it was updating and now its frozen, the screen is showing a apple logo and a loading bar which has been for 9hrs now. please help

    It's not uncommon for it to not work the first time and sometimes, you have to try it a few times. Turn off your antivirus software and your firewall while you are trying to restore the iPad. Enable them again after you restore.
    If that still won't work, post back with detailed information as to what exactly does happen as you go through the process.

  • I just updated my ipad with ios 6 but after downloading, it only appear ios 6 on the screen.  What is the next step I should do?

    can you guide me on the next action to proceed further.

    Check what version here:
    Settings>General>About>Version

  • HT4623 I tried to update my ipad with IOS7, it crashed!!!!!! now my ipad will not work, have tried to restore the ipad, will not restore, help please??

    I tried to update my ipad with IOS7, it crashed!!!!!! now my ipad will not work, have tried to restore the ipad, will not restore, help please??

    I tried to update my ipad with IOS7, it crashed!!!!!! now my ipad will not work, have tried to restore the ipad, will not restore, help please??

  • HT4623 i updated my ipad with ios7 but the keyboard does not work as it should hit the letters it is slow and does not click as it should

    updated my ipad with ios7 but the keyboard does not work its slow when i hit the letters does not click did not do this until i updated anyone can help me on this to fix it

    Settings>General>Reset>Reset All Settings

  • I updated my iPad 2 iOS to 6.1.2 and lost my album art for all my music, how can I get them back

    I updated my iPad 2 iOS to 6.1.2 and lost my album art for all my music , how can I get them back?

    Have you tried restarting or resetting your iPad?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

  • I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine

    I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine

    Hi there Fgonzalez2015,
    You may find the camera troubleshooting steps in the article below helpful.
    Get help with the camera on your iPhone, iPad, or iPod touch
    You see a closed lens or black screen
    If you see a closed lens or black screen when you open the Camera app, try these steps:
    Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
    Force the app to close, then open the Camera app again.
    Restart your device, then open the Camera app again.
    If your device has a front and rear camera, try both cameras by tapping the camera swap icon . If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
    -Griff W.  

  • HT201269 my iphone 3 cannot open.always blinking with the apple logo, how can i open my iphone 3?

    my iphone 3 cannot open.always blinking with the apple logo, how can i open my iphone 3?

    Hello there, Shaneol10.
    The following Knowledge Base article provides some great steps for troubleshooting your issue:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    If the iPhone still isnt recognized, refer to these documents (depending on which Operating System you are using)
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    or
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • With a PDF Dynamic form using show/hide actions, how to ensure that when the completed form is saved, closed and re-opened, the form still show the fields as before it was closed?

    With a PDF Dynamic form using show/hide actions, how to ensure that when the completed form is saved, closed and re-opened, the form still show the fields as before it was closed?
    I have developed a form with fields hidden by default, that become visible based on box ticked or radio button selections.
    My problem is that, when I close the form and re-open it, it comes back to it's default presentation, regardless of the information already recorded in the form (including in the now hidden fields.
    How to correct that
    Thanks in advance for any hint you can provide.

    I've had the same problem. This solved it...
    Go to the "Form properties..." in the File-menu. Select "Run-time" to the left and in the box "Scripting" Preserve scripting changes to form when saved: choose Automatically (Script-based state changes are saved locally in an insecure fashion. This option cannot be used for certified forms).
    Hope it works for you to...

  • I updated iPhoto but the app store still shows that red 1, how can I remove it?

    I updated iPhoto but the app store still shows that red 1, how can I remove it? I can't right click, i cant do anything to get rid of it.

    Nope that's not it, I always use that particular ID, but the @me.com portion of the Apple ID is missing when trying to download from the App Store on the Phone.
    It is grayed out inside the App Store app so I can't change it there and I already changed it in the settings.
    The entire Apple ID is fine in the Settings so I don't get why the App Store ID is different and missing information.

  • My ipad 4 has shut down the screen is blank just apple logo but will not restart

    My ipad shut down the screen is blank just apple logo, I cannot restart th ipad, it is fully charged. I would be most grateful for help

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Home button not working or unresponsive, fix
    http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
    Fixing an iPad Home Button
    http://tinyurl.com/om6rd6u
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • My Ipad 1 is not working. when i put it for charging it shows blinking apple logo

    I have Ipad-1 with OS 4.2.
    As my i pad sutdown even when it was showing remaining battary as 45%. When I tried to restart it was not getting restrated. I put it on charging and tried to reboot by pressing on-off switch at top and home button. Now I pad is not getting started, it is just showing blinking Apple logo. When I tried to hold home button it was showing to connect to i-tunes.
    Now I connected my ipad with computer and it is not showing blinking apple logo of conection option with i-tune. but when i connect it to power socket it shows same blinking apple logo.
    I went to apple service centre in Navi Mumbai (India) and they suggested me to replace the i pad at a cost of INR 18000 (equal to USD 375).
    Please help if I can restart my Ipad without replacement.

    - See if placing the iPad in recovery mode will allow iTunes to see the iPod so you can restore the iPod via iTunes. For recovery mode see:
    iPad: Unable to update or restore
    - Next, try DFU mode:
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Last, your iPad needs replacement

  • TS3274 after updating my ipad with ios7, the keyboard is really slow. Any suggestions how to fix it?

    after I updated my iPad mini to ios7, the keyboard has been slow. Any ideas how to fix it? I tried restarting it already. Also, how do you clear apps now? I pushed the home button twice to bring up the apps, but I don't know how to delete them. I tried holding the app down to make it shake but that doesn't work anymore.

    To clear apps swipe up on the app. You might want to try resetting all setting it has helped some. Also try setting>general>accessibility>increase contrast turning this on reduces a couple animations which some say shows an increase in speed.

  • I finally updated my ipad with ios7 and now it has locked me out because i dont know the passcode.  what can i do?

    how do i get back in my ipad?  After i updated to ios7, its asking for a passcode. 

    I don't get this.   You were asked if you wanted a passcode.  Apple always makes you enter it twice to make sure you got the same code.    How can you forget 4 numbers you just entered?
    The fix is to restore as in this link:
    http://support.apple.com/kb/HT1212

  • Update the iPad 2 with new iOS uppgrade, but after the screen only show the apple and nothing else. has been the case since yesterday. have turned off the iPad and turned it on again many times, but still only apple shown. What should I do?

    UPdate the iPad wjith new iOS upgrade that where shown under settings on the iPad, but after I did the upgrade the screen has only shown the apple and I can't get back. This has been the case since yesterday. Have turned off t.he iPad many times, but every timebwkhen Ibturn it on again the screen onöy show the apple icon and nothing else happends. What should I do? Anyone having the same problem and how can this be solved?

    Did you try to connect in recovery mode, explained in this article?
    iOS: Unable to update or restore

Maybe you are looking for

  • Managed Metadata appearing in wrong columns after Restoring a site to a new Site Collection

    I've restored a site with some libraries that have Managed Metadata (MM) columns from one site collection into another site collection inside the same web app so it should all subscribe to the same Managed Metadata Service Application. There are two

  • Oracle 11g FBDA

    Hi All, We are currently using Oracle 11.1.0.7 FBDA is enabled in the Database and facing some peculiar behaviour in FBDA Please find the error we are facing in FBDA CREATE TABLE TEST (A NUMBER(1) B VARCHAR2(10) CREATE_DT DATE LAST_UPDATE_DT DATE); E

  • I keep getting the below error message from I Web

    Can't create the file "Logo_Color.jpg." The disk may be damaged or full, or you may not have sufficient access privileges.  The is referncing the logo I have on all of my pages.  The pages turned red, when they all used to be blue.

  • Create End Customer in SAP (Transaction  --  VELO)

    Hi, I want to create End Customer into VMS for warranty transactions, (VELO). Let me Know for any BAPI or IDOC to create this End Customer.

  • Set margin of the printer

    Hi every body, Can i set the margin of any Printer before fetching data from database,for example before report trigger. if i can how can i set the margins of the printer to equal to 0.2 for example.