I updated my iPhone 4 to iOS 5 but there is no network showing. It was working perfectly before the update.
I updated my iPhone 4 to the iOS 5 and it showed as successful after completion. I have put my sim card in the phone and it has shown as no service. I tried another sim in it and it's showing the same thing. In trouble shooting I put the card in my ipad and it was recognised by the iPad. Can someone that has a clue help me out please. Thanks.
I had a friend who ran into the same probelm. What you need to do is reestablish notifications for the mail app. To do this; go to the Settings app -> Notification -> scroll all the way to the bottom and you should see the mail app in the "Not in notification center" area -> mail notifcation setting -> set notification center to On, Alert style to your desired style, badge app icon On, show preview On (if desired) and view in lock screen On (if desired). Now, go back to the main setting page and go to Mail, Contacts, Calander then make sure fetch new data is set to push. You might want to click on that to check the setting of your other non-iCloud email accounts that don't support push and set them to fetch by going to the advanced section on the bottom. Finally set the duration of your fetch and there you go. Mail will now get mail without you haveing to refresh it manually. It will also notifiy you when you get new mail. ^_^
Similar Messages
-
I Updated my iphone 4 to iOS 6 but I can't get Siri to start by holding down the home key... Am I missing something? I thought Siri is included in iOS 6!
Siri is available on iPhone 4S, iPhone 5, iPad (3rd generation), and iPod touch (5th generation) and requires Internet access. Cellular data charges may apply.
-
i just updated my ipod touch 4th generation to iOS 6 but there seems to be a problem when i go to the app store, it always crash, what could be the problem? thanks
Try quitting the app out of your multitasking bar, and then resetting (hold power an home buttons til device shuts off and comes back on).
-
my Iphone 5s was working perfectly before downloading the IOS 8.0.1 and later IOS 8.0.2. When my Iphone run out of battery, I connected it to Itunes, however the phone never turned on, and kept trying to sync, however got an itunes failure message.
Any help in this regards please.Hello douraid,
Start with the article below to get your iPhone to take a charge. Once you get it powered back on, you will want to sync again to make sure nothing was lost during the attempted sync.
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Regards,
-Norm G. -
drag and drop to photo shop no longer works after installing Apple "Photos"; It was working fine before the latest Apple update (10.10.3) . what can be done?
Nothing. It's nothing to do with PSE; this is a limitation of Photos, as is the loss of being able to use an external editor without exporting copies of your images.
-
Hi. I have updated my computer to Windows 8.1 and now suddenly my Apple TV can not find the computer, it says "turn on the home sharing". Both of these are on, iTunes and Apple TV, what to do? It was working perfect before update.
Thanks in advance.Make sure the firewall and wifi router is not blocking it you can likely see if its the wifi router by connecting by etherent cable that would mean itsopen in terms of ports
-
Here's the code that no longer works. The buttons scale down in all other browsers but stopped working after the latest firefox update.
.bigButton:hover{
-moz-transform: scale(.95) rotate(0deg) translate(0px, 0px) skew(0deg, 0deg);
-webkit-transform: scale(.95) rotate(0deg) translate(0px, 0px) skew(0deg, 0deg);
-o-transform: scale(.95) rotate(0deg) translate(0px, 0px) skew(0deg, 0deg);
-ms-transform: scale(.95) rotate(0deg) translate(0px, 0px) skew(0deg, 0deg);
transform: scale(.95) rotate(0deg) translate(0px, 0px) skew(0deg, 0deg);
}For some reason, skew() was removed in Firefox 14. You need to replace it with skewX() and skewY(). See https://developer.mozilla.org/En/CSS/transform for the syntax.
Edit: I wrote "for some reason" but what I should have said was "skew() is not in the standard, so it was removed, but I don't know why it was removed ''right now''." -
Anyone else having this problem?
Yes iMessage was barely working before (resetting network settings is what got it sort of working), but after 7.0.3, it's more broken than ever. I can't send ANY texts to iMessage users, even if iMessage is shut off. I tried resetting, I also tried resetting network settings again, but nothing has helped. It won't let me activate it.
FindMyFriends keeps giving me a prompt to connect to iTunes. And no matter how many time i click OK, it just keeps popping up. I have to try to click my way out of it faster than the prompt appears, or i just get stuck in an endless loop. And with how slow iOS 7 is on an iPhone 4, it's a bit if a challenge.
This is the first time I'm actually ready to start looking at other phones, these problem have been BEYOND frustrating. -
I set my iPad to do the latest iOS update as per usual - over the air and while on charge. When I returned to it, it was non functional the screen was blank. I reset multiple times and at one point got a red screen. I connected it to iTunes on my Mac and tried to force a restore, but this didn't work - even in DFU mode. I have gotten a 4013 error every time. I've tried different cables and different USB ports etc, but no success. It's a brick.
I have multiple Macs around the house and have tried all of them - all with the same results alas. I've restarted, ensured iTunes is up to date etc too.
On DFU mode - yes - that's it. I have no idea what DFU stands for, but it this mode is often referred to as this. I get the 'connect to iTunes' picture and can begin the restore, but the process times out waiting for the iPad. Apparently, 4013 is associated with a cable problem,, but I know the hardware is all fine.
What I want to avoid is just being told to buy another iPad. That would be totally unacceptable for an error caused by an update to a 16 month old device. There has to be some solution! -
I have a 3GS and since I did the IOS6 update my phone won't send pictures via text message. Anyone know how to fix this?
Do you have the Onavo app installed? If so, try removing it.
1. Go to your Settings app -> General -> Profiles
2. Locate the profile called "Onavo"
3. Tap Remove
4. Go back to your home screen and delete the Onavo Extend icon -
Can anyone help
If you don't see the AirPlay icon in the Control Center:
1. Turn off router, Apple TV and iPad
2. Turn on router and then wait 30 seconds for it to complete start-up process
3. Turn on Apple TV and then wait 30 seconds for it to complete start-up process
4. Turn on iPad (wait 30 seconds) and test AirPlay -
My Bluetooth keyboard will not pair with os7 after working perfectly before the update
My iPad mini won't pair with my Bluetooth keyboard anymore after updating to os7
Forget the device again, then turn off bluetooth on your iPad, then turn both the iPad and the keyboard completely off. Wait 30 seconds to one minute. Now turn on your iPad and turn on bluetooth. Turn on your keyboard and pair them up again.
-
I have tried re-booting Apple TV as well as the television, etc.
Have you tried adjusting the "Audio Out" and the "Dolby Digital" settings in settings > audio and video? It may be worth trying several combinations of these settings, although typically it is the "Dolby Digital" setting that causes most problems for users.
Also make sure that you have correctly mapped the input port on your sound system to the output, if you are unsure about how to do this, refer to the manual that came with your sound system.
Have you tried playing various content sources (i.e. podcasts, music, iTunes Store video, other video etc), do you have the same problem with all types of content? If you use optical you might also check that you can see a red light at the end of your optical audio cable. Is your optical audio cable plugged straight into your sound system, or does it go through a switch or other device? -
Just updated my iPhone 4 from IOS 6.1.3 to 7.1.2, I know I am behind the times, but I got there eventually! All seems well but I have one specific problem and hope someone can offer a helpful suggestion.
On opening the app "Find my iPhone" I add my password and sign in, to be greeted with a screen that says;
"Update Find My iPhone. A new version of Find My iPhone is available from the App. Store. You must install the update to continue using the app. Update now"
On hitting the "Update now" button I'm taken to the relevant page on the App Store, to be told that I cannot update as it needs IOS8 to be able to continue and as my iPhone is only a 4 cannot install IOS8.
I'm left going around in circles. The only thing would be to delete the app, but looks like I could not re-install the version I would need. Any body have any thoughts or suggestions? (Apart from updating my phone, I have a few months left on the contract!)
Thanks in advance.Hi, thanks for the suggestion. I have tried as you suggested, and when opening the "purchased" apps some have the icloud logo next to them, but I only have "OPEN" against "Find My iPhone". When opening it up, it goes through the same routine; needs to be updated before proceeding, and wouldn't update because I don't have IOS8.
Anything else I could try, or am I doomed!
All of your help is much appreciated, thanks -
I just updated my iphone 4s to ios 6 and now whenever i take a picture it doesnt save to the camera roll. does anyone else have this problem or know how to fix it?
Same problem on im iPhone4 / iOS6 with normal camera!
The camera takes a picture but the picture (video) doesnt appear in my Photos and therefore is not saved!
Maybe you are looking for
-
How do I transfer all my data from my old windows laptop to my new MacBook
How do I transfer all my data from my old windows laptop to my new MacBook
-
How to reset UDDI client settings in CE7.1 SR3?
Hi, I tried to configure UDDI for CE 7.1 SR3 under UDDI Client. Under Settings tab I changed the entries from localhost to my CE server IP. Now I am getting the error whenever I am trying to open UDDI client from my index page. 500 Internal Server Er
-
Invoke web service to return binary file (image) using soap
Dear all, Please I a problem when invoking a web service throgh soap protocol, this we service has two operations, the first one takes student id and return doctype of it's documents id's, the another operation takes the document id and return it's i
-
Outlook 2013 (365) shared mailbox sent items
We have a new 365 installation with Outlook 2013 clients and Exchange 365. We have a number of shared mailboxes with delegated full access as required. We have applied the "DelegateSentItemsStyle " registry key in Office 15.0/Outlook/Preferences but
-
Recommended setup for live streaming of HD video and HE-AAC audio (5.1 channels)
Hi, Could anybody please post a working hardware configuration for streaming HD video (720p) and 5.1 channel audio using HE-AAC via FMLE3? What is your experience and what kind of professional equipment would you recommend (camera, capture card, type