I updated my iPhone 4 to iOS 6 an I can connect to wifi and it will work for a short period of time until it stops loading big pages such as wifi or safari but it can send and deliver iMessages what should I do? I'm using up a lot of data now lol
.
I couldn't find the edit button on my original post so I am posting an update here.
I have gone through more apps and have had good luck on all but one more. And it's not that the app doesn't work, I am talking about the Yahoo Weather app, It works fine, but when you swipe between cities the screen lags a bit and it sometimes doesn't move between pages the way it should. On iOS 7.1.2 it was smooth as butter but on iOS 8.0, not so much. I will post a note in the app store to let them know. I really like the Yahoo app better than the new stock app.
I have been going through my games and they all work fine. Angry Birds (Original and Stella), Canabalt, Minecraft, Bejeweled 2, Silly Walks, PopWords, Doodle Jump, Deep Green all seem to work just fine.
Starbucks app works as it should.
I will stop back again next week after I have had the weekend to play with it in detail and post my thoughts again.
Similar Messages
-
I have recently had problems in getting my Adobe Premiere Elements 10 to run. One of the gentlemen was able to take over control of my computer, and got it working for me, however since that time the program will sometimes open but most times it just freezes the computer and I have to shut it down and re open without any success with opening the elements program.
Can you helpSosure
What computer operating system is your Premiere Elements 10 running on?
What video card/graphics card does your computer use? NVIDIA GeForce? If so, please read the Announcement about the Premiere Elements 10 NVIDIA GeForce issue which is found at the top of this web site. Does that apply to you? The explanation for the situation and the fix (roll back of the driver version) are all included in that Announcement.
We need to rule in or out this factor at the onset before we get to other questions
a. non NIVIDIA video card/graphics card driver
b. project preset and properties of source media
c. computer details
More later.
We will be watching for your reply.
Thank you.
ATR -
Hi, I have numerous different Apple products, an iphone 5c, iPad mini and iPod touch 5th gen.
I have had them all for only relatively short periods of time yet the lightning cable has stopped working on all of them?
On the touch, charging has stopped completely?
Is this a manufacturing issue with the new charging system?Hi, yes I'm using the original apple cables.
This definitely isn't user error nor confined just to me, the devices are used by different people in the home.
On a quick sample around the office (survey of 7 people let me add) 4 of them said the cables had broken on them and had to be replaced.
Having also searched through the forums it appears this is a fairly widespread issue.
It's defo not user error! -
I have already tried doing all of the troubleshooting suggestions. I have deleted the app, and reloaded it. I will work for a while and then stop. It doesn't really run correctly when I log on through safari either. It will shut off and take me to the opening screen 5 out of 10 times.
Try this:
1. Close all apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
2. Hold the Sleep and Home button down until you see the Apple Logo. -
I have recently updated my ipad mini to iOS 7. My Apple ID works for everything apart from iMessage and FaceTime. When I sign in, it says check your network connectivity and try agin. I have tried several times. Why is this happening? What can I do to resolve this issue?
I am having this problem. At first with the new iPhone 5, and then with the iPad 2. I am not sure why this is happening.
My gut feeling is this is an iO6 issue and here's why -
The problem mainly occurs with apps. I have about 150 apps, and when I plugged in the phone, iTunes went to sync all of them. The process would hang up after about 20 - 30 apps were loaded onto the phone. I could tell where about the process hung up because the apps on the phone showed up as "waiting".
Then on the iPad 2 I plugged in to sync and saw there was a huge "Other" component in my storage. It required me to restore the iPad 2 from backup. With this restore the same issues occurred - putting the apps back on the iPad would hang up. The videos on the iPad also got stuck - maybe after about 10 hours of videos transfered iTunes crashed.
My solution has been to soft reset the device, restart Windows, and continue the process until it's complete. This is remarkably inefficient and time-intensive but everything works with patience.
I have been wondering if others have had these same problems. -
Yes, my PowerBook G4 is still trucking along. It is running OSX 10.4.11, but I just bought a new iMac that is running Mountain Lion. I just tried to use Migration Assistant. It told me to update Migration Assistant on the G4, but I can't find an update for anything earlier than 10.5. Is there a way to get my files transfered, or am I going to need to update the OS on my computer I was getting ready to retire?
Thanks!You never know, someone might remember. What happens in detail when you try to use it, and HOW are you trying to use it?
-
The sound keeps going on my iPhone 4s ringer continues to work when volume buttons are pressed the word ringer comes up but none of the indicator blocks for volume level tried all the fixes undocking from PC works for a while then it happens again but phone not in warranty so Apple what's the fix
IF you are getting no messages period - not just no iMessages - then it is very likely a carrier issue. It is AT&T and not the phone. SMS travels via the carrier wave used to make phone calls - iMessages use data and go through Apple servers as you know
If you are getting no messages at all - then I wonder if your cell service is ok or if you are in an area of strong signal - then does your SIM card need to be looked at -
I'm having to clear cache and cookies from the tools menu sometimes 2-3 times daily in order to make certain websites appear normally. The websites will have mostly script, which will be placed in columns, and very little in the way of graphics, maybe just a still picture of two. After I clear the cache and cookies, the sites go back to normal, but maybe after a few hours when I go back to the website it will re-appear as described above. The url below is the most commonly affected but it also happens on others like Yahoo news.
In order to uninstall a possibly unwanted extension, please do the following:
#From the Firefox window click the Firefox button at the top left and select ''Add-ons'', or, if the Firefox button is not shown, click the ''Tools'' menu and click ''Add-ons''.
#Once the Add-on Manager has opened in a new tab, click the ''Extensions'' button on the left side of the window.
#You should now see a list of your installed extensions on the right side together with buttons on the right side of each extension.
#To remove an extension from Firefox, simply click the ''Remove'' button on PDF Viewer (what is this?). You should see a message that informs you about the successful removal of the add-on.
#Note that some add-ons require a Firefox restart to be removed completely. To perform a Firefox restart after the add-on removal, click the ''Restart now'' link in the message.
You can find further information about uninstalling extensions in the following articles:
[[Disable or remove Add-ons]]
[[Remove a toolbar that has taken over your Firefox search or home page]] -
Three days ago I was trying to take a picture, but I couldn't see what I was taking because of the flickering white lines that covered the screen. But when I looked at the image after taking it, it was perfectly fine. So I knew it wasn't the camera playing up. The next day my phone wouldn't allow me to view images without the lines appearing. The following day I changed my brightness settings, and it went back to normal. But now it is much worse. No matter what I try to do the flickering lines are all over the screen! I don't know what to do. I would appreciate any help, thank you!
These images don't really show the extent of the flickering, but it may give you an ideaI'm not a fan of DFU mode because I've never seen it recommended by Apple.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
I have Windows 7 running on a new Dell Inspiron.
Whenever I use Mozilla Firefox browser - it says I do not have Adobe Flash 11.0 installed. I know I do because if I open Explorer all sites needing Adobe Flash work.
I must prefer to use Mozilla - is there a way I can get firefox to recognize the Adobe Flash I have installed?There are 2 versions of Adobe Flash:
*an '''ActiveX version''' for IE only
*a '''Plugin version''' for most other browsers including Firefox
*On a Windows system, you should always update both individually.
'''''You do not appear to have the Plugin version for Firefox installed. ''''' If you did, in Add-ons > Plugins you would see "Shockwave Flash ''(version)''". If "Shockwave Flash" is there and is disabled, click the "Enable" button.
Check your Plugins often --> http://www.mozilla.org/en-US/plugincheck/
*only the most popular/used Plugins are known by this page
*page will detect only installed, '''''enabled''''' Plugins
'''<u>Install or update Adobe Flash</u>'''<br />
#'''<u>Using Firefox</u>''', go to the following link and SAVE the download to your desktop so you can find it later. Un-check any items on that page that you do not want to download (i.e., "McAfee Security Scan Plus":
#*http://get.adobe.com/flashplayer
#When the download is finished, close Firefox (File > Exit '''''OR''''' Firefox button > Exit)
#Click or double-click on the file you just saved to your desktop
#*In the installation window that appears, click the box to the left of "I have read and...." to place a check mark in the box
#*The "Install" button in the lower right corner will now be highlighted, click it.
#*The installation is quick.
#Start Firefox and test your installation here: https://www.adobe.com/software/flash/about/
#To update/install the ActiveX version for IE '''''only''''', repeat the process, '''<u>but use IE to go to the above website</u>'''.
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.''' -
i would like to know what i need to do?
If the iPhone was in water, the dry rice for a week trick sometimes works, sometimes does not work. If it does not work your only choice is to take it to an Apple store genius bar and see about a replacement. For an iPhone 4 the out-of-warranty replacement is $149 in the US.
-
I own an iPod Touch 4g 8gb. Ever since Wednesday August 12th 2012, the screen has had a problem -- it is black. Pitch black. I can tell that it still works -- by sliding my finger down to unlock it I can still hear the lock sounds. My online research told me to reset it and put it in DFU Mode -- but that didn't work. So I connect it to iTunes and restore it to iTunes and after the restoration, the screen comes back -- for a few miniutes. I did this twice and the second time was longer than the first. I have not adjusted any settings that could have anything to do with this.
So... What to do here? Can someone explain exactly what the problem and it's recovery-processes are?I'm not a fan of DFU mode because I've never seen it recommended by Apple.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
Swipe screen in operative after a short while. I reboot and after a while again it is inoperative. Anyone experienced that?
BBHello Bob4751777,
The article linked below details some useful information that can help resolve response issues with your iPhone's display.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/TS1827
Cheers,
Allen -
Whenever I make purchases on my iPad in the App Store, it asks me for my Apple ID password. I'm fine with this when its a one off purchase, but when I have to make multiple purchases continuously it can be really annoying.
How wow can I get the App Store to remember my password for a short period of time (2-3 minutes) so I don't have to type it in with every purchase? I know it can be done as the other iPad in the house is set up this way, I just can seem to find how or where to change these settings...There is Settings > General > Restrictions > Require Password which you can set to '15 minutes' - the only other option for the setting is 'Immediately', you won't be able to have it as 2 or 3 minutes.
-
all of the apps on my ipod touch dont respond, or will stop working after a short period of time. ive had my ipod for less than a year and this has been a reaccuring issue for a while. what can i do to fix this problem?
Have you tried a hard reset yet? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
Otherwise, try a restore from an earlier backup in iTunes.
iTunes: Backing up, updating, and restoring iOS software
And lastly, restore to factory defaults in necessary.
B-rock
Maybe you are looking for
-
How to use a 3rd party source control tool with RoboHelp?
Hello, I would like to set our RoboHelp users up with source control. They are using RoboHelp HTML 8.0. Our software developers are using the AccuRev scm system; I'd like the doc team to use AccuRev, too. Can someone direct me to RoboHelp documentat
-
hi i very need help my ipod touch 4th was already damages (the glass screen wasnt in the silver part) and yestarday i was cleanin my room while listeng to music and my ipod fell 2 times after about 30 min half of the screen was light white first i th
-
Modifying the Crosstab Bean appearance in JSP
Hi, I want to show five crosstabs in a HTML table each in different row. But every crosstab set their rows size independently depending on the actual column heading, so the generated page is very ugly. Is there a way to control the crosstab Bean gene
-
How to add a device back to Apple ID
How do you add a device back to Apple ID once it is removed by mistake? Signing in again doesn't work - "Apple ID Disabled".
-
Export to Excel - Macro problems
I have moved this to the Discoverer forum. Exporting to Excel - Macro Problems Message was edited by: user385142