I updated my iphone and now wants me to connect wth itunes to restore. how can i avoid loosing everything???:(

i dont not want to loose everything but it is telling me to restore and stuck in this mode....

If you have done the smart thing and backed up before your software upgrade then you have nothing to worry about.
If you didn't, well, that's a mistake you will hopefully learn from.
Best,
GDG

Similar Messages

  • I tryed to update my iphone and now my phone screen show the itunes logo with a wire and won't turn on, i tryed to update my iphone and now my phone screen show the itunes logo with a wire and won't turn on

    i tryed to update my iphone and now my phone screen show the itunes logo with a wire and won't turn on, i tryed to update my iphone and now my phone screen show the itunes logo with a wire and won't turn on

    Did you try to connect in recovery mode to your computer, explained in this article?
    iOS: Unable to update or restore

  • HT3743 my iphone 4 i bought was jailbroken to ios 6.0.1 redsn0w but i tried to restore the iphone and now it keeps saying connect to itunes but when i connect and try to restore an "unknown error" occurs and it will not boot up whatsoever. please help!

    my iphone 4 i bought was jailbroken to ios 6.0.1 redsn0w but i tried to restore the iphone and now it keeps saying connect to itunes but when i connect and try to restore an "unknown error" occurs and it will not boot up whatsoever. please help!

    If you want to solve your problems, unjailbreak. And don't do it again, because jailbreaking causes problems as you read about in that article. You can try Recovery Mode: http://support.apple.com/kb/HT1808

  • Hello, I just downloaded ios 8 for my 4s iphone and now it will not connect to itunes on my mac. Any help will be greatly appreciated.

    Hello, I just downloaded ios 8 for my 4s iphone and now it will not connect to itunes on my mac. Any help will be greatly appreciated.

    Hello wedge60,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning device recognition issues:
    iOS: Device not recognized in iTunes for OS X
    Follow these steps to resolve your issue:
    If you haven't connected your iOS device to this computer before, unlock the device and tap Trust. Learn more about the Trust This Computer alert.
    Restart your iOS device.
    Restart your Mac.
    Make sure that your Mac meets the minimum system requirements for your iPhone, iPad, or iPod touch.
    Install software updates on your Mac.
    If an iTunes update is available, apply the update.
    Check USB connections. iOS devices need USB 2.0 to work properly. If you're not sure your Mac has USB 2.0 ports, check the computer's specifications.
    Disconnect other USB devices and connect your device directly to a USB port on your Mac.
    Try another USB cable.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • I lost my iphone and now icloud dosent download the photos !!! how can i get my photos in another way ??

    i lost my iphone and now icloud dosent download the photos !!! how can i get my photos in another way ??

    You will need to get another phone to restore from you icloud backup http://support.apple.com/kb/HT4859
    FAQ photo stream http://support.apple.com/kb/HT4486

  • I just updated my ipod and now it won't connect to itunes, and itunes says to restore it, but I dont want to lose all of my data.

    I just updated my iPod to iOS 6 and now it won't connect to iTunes, and iTunes says to restore it, but if I restore it I will lose all of my data. What do I do?

    Uhless this program will get the iPod out of recovery mode you will have to restore via iTunes.
    RecBoot: Easy Way to Put iPhone into Recovery Mode

  • HT201210 I wanted to update my phone and I wanted me to connect to iTunes, but when I did it, I was told I cannot restore my iphone. Now I don't know his to turn my phone again

    I wanted to update to iOS 7, but first I had to make an update to the previous version. When I pressed update, I was shown a message saying that I have to connect to iTunes. When I did that, iTunes said I cannot restore the phone (which was the onyl way I could update apparentyl) but the phone is still showing the same message"connect to iTunes". What am I supposed to do? I tried turning it on and off, but it doesn't work. I can't use my phone right now.  

    Hello there, JuliaFromPol.
    The following Knowledge Base Article should help you proceed with the update:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • I just updated my Iphone and now I've lost all my notes!! How do I get them back?

    I just updated my iphone 4s and now all my notes are gone!!  I've been on the phone w/apple for about 2 hours and they are useless!!  I've been trying to restore my phone to get the old notes back but to no avail.
    Please help!

    I lost my contacts too after upgrading. The numbers remained under recent calls and messages, but there was nothing in my contacts list. If you synced to the iCloud, you can retrieve your contacts by turning off syncing contacts to the cloud… save the (nonexistent) contacts on the phone. Then turn syncing to the cloud back on. It worked for me… they all returned and repopulated the names to the messages and recent calls.

  • Updated to ios6 and now iPhone4 won't connect to itunes

    I recently updated my iPhone 4 to ios6, and now when I connect to itunes it says ,"The iPhone “_____’s iPhone” cannot be used because it requires iTunes version 10.6.3 or later. Go to www.itunes.com to download the latest version of iTunes."
    My itunes is currently 10.6 (40), and when I check if theres an update it says, "This version of iTunes (10.6) is the current version."
    I have a 13" white macbook (I don't think apple sells it anymore). Software: Mac OS X Version 10.5.8.
    According to my software update, it is currently up to date ("Software Update doesn’t have any new software for your computer at this time.")
    I tried downloading itunes 7, but says I can't ("This software requires Mac OS X version 10.6.8 or later.")
    How much would the software update to 10.6.8 cost? And what are the steps to doing it?
    Thank you.

    No - I updated my iphone last week to ios 6 and now when I use my phone in my car to listen to my music on the iphone it says 'no directory...'.  I tried another iphone, just updated, and it said the same thing - then I asked if I could use a iPod, it's the old version ios 5 and it worked fine. 

  • IPhone4S: tried to update to iOS6 and now will only show "connect to iTunes" screen

    I've got an iPhone4S and tried to update to iOS6 via iTunes.  While installing, a message came up on my computer saying that "iOS6 could not be installed due to an unknown reason" (I'm paraphrasing b/c I didn't write it down, figuring that I could just re-do it).  Ever since that message came up, neither iTunes or my computer recognizes that the phone is plugged in.  Also the phone sceen is stuck on the "connect to iTunes" screen, which displays the USB cable with an arrow pointing to an iTunes logo.  I've done the 10 seconds reset, updated iTunes, etc., and everything else that the iPhone troubleshooting suggests.  Nothing is working, and my phone is totally un-usable.  PLEASE HELP!!! Thanks!

    1)I tried tinyumbrella. But it stills stucks in Recorvery Loop.
    2)Tried also using DFU mode buty tinyumbrella isn't detecting the device in DFU mode.
    3)I also tried iRecovery and results are same.
    4)Is there anyother way to break the recovery loop as i don't have any backup for my device.

  • I updated iphone 5 to ios 8.1 but now there is many problems and i want to turn back to ios 7 . How can i do it?

    HI I updated iphone 5 to ios 8.1 but now there is many problems and i want to turn back to ios 7 . How can i do it?

    Just restore the iPhone as new
    Use iTunes to restore your iOS device to factory settings

  • HT4528 I updated my iPhone and now it want come on just keeps showing picture to connect to itunes

    I updated my iPhone and now it want come on just keeps showing connect to iTunes logo

    Hey there Smurf_28,
    Thank you for using Apple Support Communities!
    I would next try connecing the iPhone to the wall charger that came with it, and resetting the device:
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    If your device stops responding, you can reset it by pressing and holding both the Sleep/Wake and Home buttons for at least ten seconds, until the Apple logo appears.
    When the reset is done, it will still be in recovery mode, so connect it to iTunes and continue with the restore.
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    All the best,
    Sterling

  • I updated my iphone, and now it won't let me access an app...help!

    i updated my iphone and now i cant access an app...help!

    I do go thru safari and I get thru the log in into my account but when it comes to showing your statement it blocks it. I had no problems until I download the latest version.

  • I updated my iphone and now it won't turn on

    i updated my iphone and now it just wont turn on! The apple sign comes up as if its going to turn on and the sreen goes darker and just goes blank. why wont it turn on? its been doing this for the past half hour

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    But... if the Device has been Modified... this will Not necessarily work.

  • HT201210 I tried to update my iphone and now it won't work at all

    I tried to update my iphone and now it won't work at all

    Yes, connect to your computer with the latest version of iTunes installed and restore it. If it doesn't show up in iTunes when you connect it see: http://support.apple.com/kb/HT1808

Maybe you are looking for

  • Production Order for a material without BOM and Routing

    Is it possible to create a production order for a given material without routing and BOM, I know we can create a production order for a material without a BOM (with a default routing) just wanted to check with the above criteria Thanks in Advance!!

  • In Firefox v4.0.1, custom toolbars disappear from the toolbar menu when I open a "New Window".

    1. I created a new toolbar in Customize... / Add New Toolbar. It's on the list of toolbars and opens up '''most times''' I start Firefox, but not ''always''. I have tested it and it is completely random. 2. Same type of problem as 1., but '''''everyt

  • JVC AVX 2 Car head unit not compatible with ipod touch.

    Hi I upgraded to an Ipod touch 2nd gen 8 gig. I was just wondering because my old ipod mini can sync with my cars headunit or player but with the ipod touch it only displays accessory connected. I am a bit frustrated because it seems that I cannot us

  • Process Flow fails to import

    Hi, I am trying to import a process flow from one design repository to another and am failing misrably! I have saved an mdl export of the process flow from the repository where it was created and am simply importing the same mdl into the new rep. I d

  • General log4j question I can't answer myself

    I have developed an app using Eclipse that uses log4j and everything seems to work fine. But when I copy the code to our Unix box and run it with Ant (just upgraded to 1.7 if that makes a difference), all the logging gets redirected to stdout. It WAS