I updated my iphone but now its stuck on the apple logo
I have an iphone 4, I updated my iphone to the lastest update it restarted and installing the update but now its stuck on the apple logo.
My home button does not work prior to this, so I do not know how to get off the apple logo and get my phone back. HELPPPP!!!!!!!
Hello WAGHAT,
Thanks for using Apple Support Communities.
You will need to get your phone to enter in recovery mode, as the article below dictates.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
If your home button is not working however, you will first need to get that fixed before being able to enter recovery mode. The link below has more details on getting service for your iPhone.
iPhone Repair - Other Repairs
http://www.apple.com/support/iphone/repair/other/
Take care,
Alex H.
Similar Messages
-
i reset my ipod and now its stuck on the apple logo what do i do to fix it? reset my ipod and now its stuck on the apple logo what do i do to fix it?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I tried to restore my iPhone 3G by doing so on the iPhone but now it just displays the Apple logo and refuses to proceed any further. Any suggestions?
Hello, Spedellen.
Thank you for visiting Apple Support Communities.
When experiencing issues restoring an iPhone, here are the best articles to go through. If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Cheers,
Jason H. -
I was updating my ipad and now its stick on the apple logo
so right i was updatiung my ipad through recover mode to the new firmwear and now its stuck on the apple logo and the installation bar isnt moving its froze next to the end, help please ?
Try rebooting the device by pressing and holding the on/off and home buttons simultaneously until the screen goes blank and you see the apple logo again. It should take about 10-15seconds to reboot.
-
I powered off my ipod touch and turned it back on and now its stuck on the apple logo
I turnred ipod touch off and few seconds later, i turned it back on. Now its stuck on the apple logo for more than 6 hours.. :/ anyone knows the proble? D;
Can't connect to the iTunes Store
-
i have a iphone 4s and its stuck at the apple logo to comes up then fades away and every time i try to restoring with iTunes it gives me a 4013 error i changed the charging port/dock and the battery ive also used a different computer and cable
See: http://support.apple.com/kb/TS3694#USB
However, the most likely reason is your self-repair of a device that is only factory repairable broke something. Note that Apple does not sell replacement parts, so whatever parts you used were not made by Apple's supplier and are of questionable quality. -
My ipad wont work. it ran out of batteries and now its stuck on the apple logo
i just got my ipad less than two weeks ago, and i went to sleep with it on 27% charged. when i woke up it was out of batterie so i plugged it in, but it got stuck on the apple logo with the swirly thing and when i plug it in again, it just keeps making the 'bing' sound over and over again. what do i do?
Using the Charger that came with your iPad... Connect it to the Mains for at least 30 - 40 minutes...
Then try a reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
my i phone 4 is stuck with the apple logo on the front screen. i tried turning off but its frozen. this happened when i was doing the most current up date and an error message popped up. please help.
Laci1. Try forcing reboot by holding down the home button and power/sleep button at the same time until the screen restarts.
-- IF THAT FAILS --
Let the phone battery drain. -
My iPad is stuck with the apple and the updating line but it is not finishing the update and the iPad is stuck I can't shut it off nothing is working just the bright white apple in the window.
Hi rm44,
Try resetting your device (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Once the reset is complete, the Home or Lock screen will display. Once the device is back up, go to Settings>General>About, and see what version is displaying. If it has the iOS number you were updating to, then you are all set.
If it has the old iOS version number, then the update did not take place. The best thing to do in that situation is to hook the device up to iTunes on the computer you sync with, and to update via iTunes.
Cheers,
GB -
iphone wont work .. question says it all /; , after jailbreak .. really ****** .
Yeah... it's one of the negative side effects of the jailbreak process. Your best bet would be trying to restore the phone, but it seems even that might give you trouble, from what I've read in another topic.
-
Hi, reset my
Apple considers jailbreak a violation of terms of use. Doing it voids your warranty with Apple and you give up your right to support from this forum.
-
I updated my ipod touch4 and it said i had to plug it up to itunes which i did then when i plugged it in it said i had to restore which i did and i was very upset and it restored it i guess and now its frozen on the apple logo how do i fix it? ps my ipod home button doesnt work.
Try as much as you can. When it says to place in recovery mode use this program instead.
RecBoot: Easy Way to Put iPhone into Recovery Mode
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
My MacBook Pro fell and now when I turn it on its stuck at the apple logo screen with a loading circle underneath it. What can I do to get passed this?
Sounds like something internal was damaged in the fall, probably the disk drive. Take to Apple and ask them to fix it.
Allan -
My iphone 4 screen is stuck with the apple logo on it , Help!
My iphone 4 screen is stuck with the apple logo on it and i have tried holding the home button and power button down for 20 seconds but nothing is happining , meaning the phone isnt loading up has anyone got any idea what the problem could be ?
Plug the phone into your computer via the USB cable and open iTunes.
Once you have connected the phone to your computer and opened iTunes, hold the home and sleep buttons down until it goes blank. You are now in DFU mode. Click the restore button in iTunes.
Note: You will lose all data. You can restore from a backup if you previously saved one. -
I have tried to reset and restart my iPod touch but it remains stuck at the apple logo and turns off. The iPod is not responsive when i connect it to my computer or wall charger.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
Unable to restore iOS 7.0.4 in a ipad with 3004 and 3194 Error
Hi I've been trying to restore my ipad to iOS 7.0.4 for 3 days (I really mean it) but I just get Error 3004 or 3194 continuely. These are things I have tried : 1 - Check the windows host file ( put the gs.apple.com , remove it , test with different I
-
What is the best way to keep your macbook pro in tip top condition. performance wise
What is the best way to keep the performance of a macbook pro in tip top shape. Over the years my computer seems to act like a pc with all of its hicups and lockups. I am running mountain lion and this computer is approx 2 years old. Not sure if the
-
Run time column names as parameters
Hi SDN, I am trying to use a FORM/ENDFORM which can work for many internal tables in my project except that a couple of field (table columns) names differ. In other words, just for two assignment statements I may have to repeat rest of the code, unle
-
Spry data set not displaying in IE8
Hi, I have inserted a spry data set based on an HTML table onto my page. The data displays in live view and in Safari, but when I try to preview in IE8 I get nothing. Here's the page: http://www.emiliocorsetti.com/publish/maps.html Any ideas? I didn'
-
In windows batch file,how to check if connection to db is successful or not
I want to do some operations in batch file. So i use command "sqlplus usr/pwd@con @operation.sql" to in the batch file. But how can i check if i connect successfully? The %ErrorLevel% is always 0