I updated my iPod nano 6th gen firmware 1.1 to 1.2 with iTune but it is not ok because of connection

I updating my iPod nano 6th gen firmware 1.1 to 1.2 with iTune. But it is ok because an network error has occurred. How can i solve this problem.
Can I download iPod nano 6th gen firmware 1.2 update file without using iTune?
I want to offline update with iTune.Can I get firmware 1.2 update file.

Universal Serial Bus controllers
     Intel(R) ICH9 Family USB Universal Host Controller - 2934
     Intel(R) ICH9 Family USB Universal Host Controller - 2935
     Intel(R) ICH9 Family USB Universal Host Controller - 2936
     Intel(R) ICH9 Family USB Universal Host Controller - 2937
     Intel(R) ICH9 Family USB Universal Host Controller - 2938
     Intel(R) ICH9 Family USB Universal Host Controller - 2939
     Intel(R) ICH9 Family USB Universal Host Controller - 293A
     Intel(R) ICH9 Family USB Universal Host Controller - 293C
     USB Composite Device
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
I'm not sure if it charged when I hooked it up to my roommate's computer, but it definately didn't register either. If I put it on the dock it plays so the port is fine, but that still doesn't help me sync it to my computer.

Similar Messages

My ipod nano 6th gen just flashes the apple logo when plugged in but goes blank when not plugged in. i have tried changing format to fat32 but i can't on windows 7

i have recently recieved an ipod nano 6th gen after the 1st gen recall, and out of nowhere it just started flashing the apple logo when connected to computer. Help please!

Universal Serial Bus controllers
     Intel(R) ICH9 Family USB Universal Host Controller - 2934
     Intel(R) ICH9 Family USB Universal Host Controller - 2935
     Intel(R) ICH9 Family USB Universal Host Controller - 2936
     Intel(R) ICH9 Family USB Universal Host Controller - 2937
     Intel(R) ICH9 Family USB Universal Host Controller - 2938
     Intel(R) ICH9 Family USB Universal Host Controller - 2939
     Intel(R) ICH9 Family USB Universal Host Controller - 293A
     Intel(R) ICH9 Family USB Universal Host Controller - 293C
     USB Composite Device
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
I'm not sure if it charged when I hooked it up to my roommate's computer, but it definately didn't register either. If I put it on the dock it plays so the port is fine, but that still doesn't help me sync it to my computer.

Ipod nano 6th gen - firmware 1.1

Hi,
I have no internet connection in my room so I would like to download the firmware in my office and upload it in a second time in my room.
Someone can help me to download the firmware without start iTunes and then install the firmware in a second time.
TKS.

You should only be prompted to select a file if you click that update button while holding down the option key on a mac. If it is asking you to select a file, you may have something up with your keyboard.
i

Can i get red clock face firmware on my ipod nano 6th gen silver?

I have an ipod nano 6th gen firmware 1.2 silver and i would like to know if i can get the red or other colour clock face firmware on my ipod.

I know that but i mean the colour of the clock face like if you get the red ipod you will get the red clock face on the clock number 7-9. Any chance to get it on my silver ipod.
Thanks

IPod nano 6th gen digitizer issues

Hi,
I recently replaced the battery in my oow ipod nano 6th gen. After replacing everything, it booted up fine, but now the touch screen capabilties are not working. I took apart another oow 6th gen nano and I get the same result.
I went to the diagnostics menu and whenever I press "Sensor Test" it says Please Wait and will flash back to previous menu. The same happens with "IC version" and when I check for errors, it says No IC error reported. It's a bit confusing.
Does anyone have any ideas?
I appreciate your help!
CJ

Bump

Receive error message, The iPod cannot be synced. The required disk cannot be found. iPod nano 6th Gen, all latest updates, Macbook Pro, with OS 10.6.7

Receive error message, "The iPod cannot be synced. The required disk cannot be found. This is a iPod nano 6th Gen, all updates on iTunes and iPod, Macbook Pro OS 10.6.7. This is getting frustrating. I have changed USB ports, cables, reset, restored and was able to sync one time in parts, not all songs at once. I have seen a lot of this same issue, will Apple please find a solution, nothing works, I think I wasted my money with this iPod. I have the iPod touch, iPod shuffle, 4th gen iPod nano, iPhone and iPad. This is the only device that has this issue.

I was actually able to investigate and solve the problem myself. After readng many posts, I found that someone else's tips worked for me:
Re: 30gb 5th gen. Probs syncing.
Posted: Oct 13, 2009 8:48 AM in response to: johnnyfrommars
Try running a disk check out the iPod using the tools provided by windows.
To do this:
1. Plug in your iPod and close iTunes.
2. Go to "My Computer". Click on the iPod drive once. Go to File, and then click Properties.
3. Go to the Tools tab. Under "Error Checking", click Check Now.
4. Check both boxes. One says "Automatically fix file system errors" and the other says "Scan for and attempt recovery of bad sectors". Place a check mark next to each of these options and hit Start.
The scan may take several minutes or more to complete, but once it has, go ahead and restart iTunes, and try re-syncing files to your iPod.
B-rock

Ipod Nano 6th gen not syncing mp3s after itunes 11.1.4.62 update

As the title says, after updating itunes to the 11.1.4.62 update, and everything that doing that successfully involved such as completely uninstalling all Apple software and then reinstalling itunes, my ipod nano 6th gen will not allow itunes to sync any mp3 files to it. The only way to get any new files onto it is to let the ipod convert them into AAC files when you transfer, even though all other music files on the ipod are, and have always been, mp3 files. Everything worked fine before the latest itunes update, I could sync mp3 files to the ipod nano with no problems.
Anyone know of a solution to this issue, or whether Apple are working on a solution for this obviously botched itunes update?
Thanks in advance.

Hello MarkLesch,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iPod nano: Error message saying that iPod 'could not be identified properly'
http://support.apple.com/kb/TS3218
Verify that your computer meets the minimum system requirements
Verify that iTunes is installed and updated
Restart the computer
Verify that Apple Mobile Device Support is installed
Verify the device's USB connection
Verify that the Apple Mobile Device Service and iPod service are both running
Verify that the Apple Mobile Device Driver is installed
Remove and reinstall iTunes
Best of luck,
Mario

Software update for the iPod Nano 6th Gen

Is there gonna be any software update for the iPod Nano 6th Gen for video playback??

Re: Software update for the iPod Nano 6th Gen
There is already new hardware for the nano (7th Generation) and it would take a hardware modification to put video on the 6th Generation Nano so no speculation was needed, Carl had the correct answer.
My Original iPod Nano received updates beyond it's generation, there is no reason to conclude this would not be possible for other models and generations. Why would the iPod Nano 6G need a hardware modification for video playback? It already can do analog composite video output for viewing slideshows with music and transitions on a TV and can handle full photo resolutions. The iPod Nano 6G seems more than capable from a hardware perspective of video playback, it's just that the screen is tiny small for viewing video realistically for any length of time with comfort. That can be rectified by using the onboard TV out feature, though battery life might be miserable. It has nothing to do with the release of the iPod Nano 7G.

I have updated to windows 8.1 from windows 8. My ipod nano (6th gen) is no longer identified properly in itunes. I have tried all steps in the troubleshooting guide but it has not resolved the issue. What can I do?

My ipod nano (6th gen) is no longer identied properly in itunes. I have followed all steps in the troubleshooting guide (uninstall and reinstall itunes several times, Apple Mobile Device running ok, verified USB port runs) but the issue is still not resolved. What can I do?

Universal Serial Bus controllers
     Intel(R) ICH9 Family USB Universal Host Controller - 2934
     Intel(R) ICH9 Family USB Universal Host Controller - 2935
     Intel(R) ICH9 Family USB Universal Host Controller - 2936
     Intel(R) ICH9 Family USB Universal Host Controller - 2937
     Intel(R) ICH9 Family USB Universal Host Controller - 2938
     Intel(R) ICH9 Family USB Universal Host Controller - 2939
     Intel(R) ICH9 Family USB Universal Host Controller - 293A
     Intel(R) ICH9 Family USB Universal Host Controller - 293C
     USB Composite Device
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
I'm not sure if it charged when I hooked it up to my roommate's computer, but it definately didn't register either. If I put it on the dock it plays so the port is fine, but that still doesn't help me sync it to my computer.

Ipod nano 6th gen not recognized by itunes

I recently updated my version of itunes and now whenever I plug in my ipod nano 6th gen an error message pops up saying it doesn't recognize my ipod. Why odes this even happen?

For anyone else having this problem, I found this solution to work. Try this first:
a) Get Windows to restart the drivers:
    - disconnect your USB device and close ITunes
    - connect your USB device
    - if ITunes loads, close it.
b) File explorer:
Open File explorer and browse to
C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
In that folder there should be a set of files named "usbaapl64...."
right click on the one ending in "INF"
Select Install. It's very quick.
remove the USB device
c) Restart the computer.
When you login again, load ITunes before you attach your USB device.
d)If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job.
f) If still not works, try re-install iTunes. Go into the Unstall Programs (in Control Panel) and uninstall everything that says Apple, and uninstall Bonjour. With the fresh install of iTunes, everything came back and is should work. Hope it helps.
<Link Edited By Host>

Ipod nano 6th gen damages headphones with an inline mic?

I have been using skullcandy earbuds with inline mic/ remote with an iPod nano 6th gen. The problem is that songs will skip automatically, voice over comes on inadvertantly, and volume will go up and down by itself. at first i assumed it was the headphones since it seemed that a button on the inline remote was sticking and causing all of these inadvertant problems. but, i got brand new set of earbuds, different cheaper brand with inline remote (iLuv), and first tested them on my iPhone. they worked perfectly on the iPhone for several weeks. I then started using them on my iPod nano, and a few days later noticed the same thing as before - inadvertant skipping, voice over, etc. When i tried to use the same earbuds again, but on my iPhone, the problem persisted indicating that the headphones were now damaged. That is when i realized it must be the iPod somehow short circuiting the earbuds, since it happened on two separate sets of earbuds.
Has anyone experienced this problem before when using earbuds with an inline remote / mic? is it possible that the earbuds are not compatible with the iPod? i am worried that this is a hardware issue and cannot be fixed by software update....

Did you try doing a Reset on the iPod (which restarts the iPod)?
http://support.apple.com/kb/ht1320
If that does not help, you may want to also try doing a Restore of the iPod in iTunes.
http://support.apple.com/kb/ht1339

IPod nano 6th gen (brand new) doesn't recognize when headphones are plugged in

I have a brand new iPod nano (6th gen), and it doesn't detect when headphones are plugged in. I have read that the problem can ocurr because the headphones are not correctly inserted (which is not the case.. i'm absolutely sure about this) or that the headphone jack has dust inside (which is also not the case, since it is brand new).
This is what happens:
When i play a song, and then press the sleep/wake button to turn off the display, the music stops. Or if i let the music play, it stops when the screen times out and turns off. These two things occur because the ipod "thinks" that there are no headphones inserted.
When i try to activate the FM radio, the radio won't start because it says that there is no radio signal (which occurs when no headphones are connected).
Needless to say, the microphone and volume controls of the iphone headset, don´t work at all (they even work on the ipod shuffle!).. and because of this, no voice recording for me!
It's a shame, because the FM radio is completely useless, and music playing only works by activating the "double click to play" option in the settings menu.. but it is somewhat cumbersome the process of "play music - turn off the screen - double click to resume playing" every time I select a song.
The headphone detection has only worked randomly when the ipod is connected to the computer, but i haven't been able to figure out under what conditions this occurs. I have read about this issue, and I only would like to know if this is a firmware bug of the 1.2 version. I tried unsuccesfully to downgrade the firmware to the 1.1 version (maybe because the ipod shipped with the 1.2 version).
I have also restored the device in itunes, with no luck.....
Thanks in advance for any useful answer!

Thanks for your answer...
The headphones that i'm using, are the ones that were included with the iphone 4 (so, they are original).. however this shouldn't be a problem, as the ipod should work fine with whatever headphones i choose to use (sound quality will vary, of course).
The ipod does the same with the headphones that were included in the box, and with every pair of headphones i have used to test, so i'm certain that the ipod has an issue.
I hope that the picture is clear enough.. here you can see that the headphones are fully inserted, and the ipod is not recognizing them.

IPod Nano 6th Gen needs a restore every day...?

My iPod Nano 6th Gen works well for arond 24 hours but every morning when i wake up it says it needs to be restored using iTuunes.
When I restore it, it works perfectly. No problems at all. I can fill it to capacity with music and it works all day. The next morning, the battery is still really close to fully charged, but the iPod is in recovery mode. I've scoured the internet but haven't found anyone with a similar problem.
Generally, I've read about iPods that will not restore, or that, even after a restore, will remain in recovery mode, which is indicative of moisture or some other malady.
This Nano has been well cared for and is in flawless condition in every way aside from the condition mentioned. Not even a scratch or smudge. I'm baffled.
Has anyone experienced a similar problem? I love to use the smaller ipod when running or bike riding, but am stuck restoring it each day I choose to use it over my Classic 160's.
Any help is appreciated.

Ok, here is a bit of an update on the issue.
For the last two mornings, when the Nano says it needs a restore, I've hard reset it (holding down both the select/menu and volume down button simultaneously), then, when the apple logo shows, I held down the menu and the volume up button simultaneously, which then restores the ipod back to functioning properly (I think I read that this is supposed to put the ipod into disk mode, which it doesn't do on this Nano, obviously).
Aside from being annoying as all get up, I suppose the ipod is working, so it's a minor victory.
Still, does anyone know why this might be happening every single night? The battery is still completely charged and once I do the aforementioned sequence, the ipod works perfectly until the next day.

Ipod nano 6th gen touch screen stopped working please help

Everything on the ipod nano 6th gen is working except the touch screen and once it goes to sleep i have to hold the sleep button and the volume down button to turn it back on. I went into the volume -, sleep, volume + menu and went through the tests and in the touch panel error check section it says i have IC error reported: 0xFFFFFFFF. Please help as i have reset and restored and update itunes etc. Do i need to send it in to apple? The touch screen was working at one stage and then i disconected from the computer while it said eject first (this is when the touch screen stopped working) and put the ipod on a different computer. The first computer was windows 7 which i used just to charge it a little and the second one im using is windows vista.

I have had the same problem and changed three Nano's. Each time the fault is diagnosed by Apple as "water damage".
If you take your Nano to one of their maintenance centres they will look into either the headphone socket or the power dock and and tell you that you have infringed the warranty by somehow getting the thing wet.
Basically is a poorly designed piece of kit whereas a simple shuffle is way more robust.
I have given up with my Nano and am now using an old model

Ipod nano 6th gen askinh for resore every time i connect and after the restore not showing the sysnced song on ipod

i have a ipod nano 6th gen, few days back when i tried to add few songs through iTunes it gave me error that it "can't connect to ipod . restore it" so i did and after that i synced al the songs and it showed that my my empty ipod has been up few GB's. after i disconnected , i could not see any song on the ipod . when it connected back the ipod the got same error about restore. i dont know what to do now , please help.

Hello Singhindia,
It sounds like you restored your iPod Nano when iTunes prompted you and it appears to sync. When you disconnect it and look at the content, the songs arent there, and when you plug it back into iTunes you get the same message again. I would recommend these troubleshooting sections from the following article to help isolate the issue to hardware or software:
iPod nano: Error message saying that iPod 'could not be identified properly'
http://support.apple.com/kb/TS3218
Verify that iTunes is installed and updated
Restart the computer
Verify that Apple Mobile Device Support is installed
Verify the device's USB connection
Verify that the Apple Mobile Device Service and iPod service are both running
Verify that the Apple Mobile Device Driver is installed
Remove and reinstall iTunes
If the issue continues, gathering iPod Diagnostics may be helpful for you or for support personnel in identifying the issue.
Additional Information
Certain phone connectivity software from vendors such as Samsung, Nokia, Bora, Novatel, and Sony may also cause this issue. If you have such software on your computer:
Uninstall your Samsung, Nokia, Bora, Novatel, or Sony phone connectivity software and test. Contact the manufacturer of this software for assistance in doing this.
Remove iTunes and all related Apple software by following this article (for Windows XP), or this article (for Windows Vista and Windows 7).
After reinstalling iTunes, test the iPod nano.
If you still need your phone connectivity software that was removed, reinstall this software and test your iPod nano to ensure it still functions with iTunes. Contact the vendor of your phone connectivity software if the issue returns.
While the error message is different than you are seeing, the troubleshooting is relevant for you.
Thank you for using Apple Support Communities.
All the best,
Sterling

I updated my iPod nano 6th gen firmware 1.1 to 1.2 with iTune but it is not ok because of connection

Similar Messages

Maybe you are looking for