I updated my ipod touch 3rd gen yesterday to iOS5 and it was working fine. Then today, my music wouldnt play anymore, so I deleted all of my music from itunes, and my ipod. I have two accounts one for te amarican store and one for the german store, I got
I DONT KNOW WHAT TO DO HELP v.v
The iOS update made the iPod less tolerent of marginal/fake Lightning cables. All you can do is get a certified Lightning cable. I would get a genuine Apple cable.
Similar Messages
-
Own Photoshop CS5.1 installed on two iMacs, when using second iMac, rarely used,got error message ~"not authorized to use program" on this second iMac I have two accounts one in my name one in my wife's both share photoshop...was in my wife's account when I got message...never happened on my primary iMac on which I have my own account and one for guest account that doesn't share photoshop....what is wrong..am allowed to install program on two machines?
Customer Care would have the authority to reset activations. We are basically users such as yourself and can't do this.
Contact Customer Care
Gene -
Is it possible to have two USB drives for the IPad? I want to bring RAW files from my camera through the IPad and out to an external hard drive. One of my cameras has an SD card but the other one doesn't have a card that would fit in any of the camera devices I've seen on line. Realted to this, I bought the IPad camera accessory. Can I put the SD card in the device and also hook the external hard drive to the USB port of the accessory and download from the camera to the hard drive? Can I put Lightroom or the Nikon photo editing software on the IPad? Right now I carry a PC laptop and external hard drives with me on wildernes trips. Internet and WiFi are not available. Because I shoot so many photos and they're in RAW I need to download from the camera to the external drive because I run out of memory on the PC (and it has much more memory than the IPad). I have Nikon NX software and lightroom on my PC. I'd love to be able to reduce the weight I carry by using the IPad to edit my photos each night while on trips. Is this possible and how would I do it? I'd appreciate any guidance.
No, the camera connection kit only supports the copying of photos and videos to the Photos app, it doesn't support copying content off the iPad. For your second camera instead of the SD reader part of the kit, does the iPad to camera cable not work with it for direct transfer to the iPad ?
For Lightroom and Nikon software again no - you can only install apps that are available in the iTunes app store on your computer and the App Store app on the iPad, 'normal' PC and Mac (OS X) software are not compatible with the iPad (iOS). There are some apps that perform fairly basic editing functions that are available in the store, but nothing as sophisticated as, for example, Lightroom. -
When I have two clips, one above the other, I would like to hear the audio from one at a time. How do I suppress temporarily one of that, in a easier way? Thank you.
I would think you would drop down the audio level lines in the "Stereo" tab (FCP 6.0.6 view to me) in the clip's video window.
But then again, in my old version, I can't play two clips at once. But I figure if the newer FCP allow you to do that, then that's what I would do. -
okay so my ipod got disabled, so i had to restore it and i was wondering how to get my music from itunes to my ipod?
You can sync it to your iPod by:
To sync to your iPod go to iTunes>Help>iTunes Help>Sync your iPod.... and follow the instructions.
You can also redownlaod iTunes purchases directly to the iPod by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Is there a way to revive my ipod? it was working fine, then all of a sudden its completely dead.
is there a way to revive my ipod? it was working fine, then all of a sudden its completely dead.
Have you seen this article yet?
iPod won't turn on
B-rock -
I get an error when trying to sync my music. It says I do not have enough access privileges for the operation.
Follow this instruction exactly to the last line. It worked on mine.
Jolly Giant wrote:
daduser wrote:
"copying files failed, because you don't have permission to change your ITUNES media folder or a folder within it."
check if you have read & write permissions for your iTunes music (or media) folder. in finder, right-click on it and +get info+. unlock the little padlock (you may have to enter your admin password) and change the permission settings. if permissions settings check out, click on the little gear-shaped icon and +apply to enclosed items+ like so
now try consolidating again. -
I purchased music from Itunes on a PC several years ago. I am unable to locate my sounds in the ITunes library. Where did my purchased songs go???????? Can I transfer my purchased songs from the PC to my MAC or iPod Shuffle??????? PLEASE HELP!!!
Click here and follow the instructions.
(80232) -
Itouch 5th gen was working fine then I shut it off and it wont turn on. tried itunes and when its siting here it heats up badly
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The hotness indicates a possible hardware problem. If the iPod is defective and not abused Apple will exchange it at no cost -
in regard to Time Machine.
I have two accounts on one Macbook Pro running OS 10.6.8. One account is an admin account, the other is a standard user account.
When I initially implemented Time Machine I was logged into the Admin account. I allowed Time Machine to erase the drive and backup the computer. Is the standard user account contents also backed up?
Also after I completed the Time Machine backup session, I turned off Time Machine and removed the portable hard drive. I plan to return in to Time Machine after being away from the portable hard drive for approximately a month. After a short interruption of approximately one month, when the Macbook Pro is reconnected and Time Machine is turned back on, will Time Machine create a new instance of a backup? WIll the back up contain the standard user account changes?Time Machine backs up by default all the user accounts.
When you reconnect the backup drive after one month, Time Machine will do an incremental backup and it might take a while minutes to hours depending on how much has been changed. With a gap of a month, Time Machine will have to do a lengthier than normal survey of both drives to see what has changed, so it might take some time preparing for the backup. The backup will include everything that has changed since the previous one. -
IPod touch was working fine, then next time will not power on. Just over a year old
iPod touch was working fine, next time no power uo
You should try doing a restore. A restore on your ipod touch will delete all it's storage and set it back to it's factory conditions but it should fix your problem. Before the restore, I suggest making a backup file for your ipod touch on itunes.
To restore your ipod touch:
1.Connect your ipod touch to your computer and open itunes if not already open.
2.Select your ipod touch name in the devices section of the source pane.
3.Click the restore option under the version section in the summary tab. An alert will pop up asking you if you really want to do this. To affirm, click restore.
4.The restore process has now started.
With your ipod touch restored, you can resync it working fine. -
Premiere Pro CC has been working fine until today. I have completed my sequence and it is active. I have both audio and video checked when I am exporting using H.264 with Match Source Hi bitrate. I am choosing entire sequence. The audio exports but the video and title does not. Can anyone tell me how to troubleshoot this so I can complete this project? Please!
Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M. -
My ipod touch 3rd gen fails to restore and disconnects its self mid sync. How can I fix that?
Its really annoying. Idk what happened to make it act this way, (i'm thinking the recent update for iOS 4.3)
First, it connects normally and says that there's an update for the ipod. I download it and let it install, then for some reason while starting back up, it failed. I guess it lost its connection or something but mid restart the progress bar stopped at no more than a sixth and stays there till I disconnect it physically and retry the prossess. I tried that for 3 hours, but it always failed, so I connected it to my other computer and it restarted properly with the new iOS. I tried connecting it to my main computer (with all the music and apps) and tried restoring it with all my apps and photos and things, but it failed once again like when restarting. Every time it connects, it automatically syncs like it normally should, but it doesn't sync properly and complains that the ipod is disconnected when it is clearly connected.
Currently, I don't have any of my apps on it, I only have 2 gb of music on it, and it doesn't sync what so ever. I click and drag a playlist or app to sync, says that its doing it, but then stops after 5 seconds without doing a thing saying "its ok to disconnect". Its really annoying me. Help please??
(btw. I don't think its the cable because it did work with the other computer)Try a manual install following directions in link below.
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD 120G Vertex 3 SSD Boot HD -
I have set up my ipod touch too use the internet which is sky its been working fine but now when i try it say unable to join network and there is a padlock beside the sky wi fi thing when i tap that it asks for password and i cant remember the password is there anything else i can try
You can guess the passwoard. That is all you can do.
You can enter the router etup and change the password. You may have to rese the whole router. Look at/download the manual for the router to find out how to do that. -
Hi All
Is it possible in IOS to have for a particular subnet:
a) Two static routes?
b) Make one static route a higher priority than the other?
c) If one static router "goes down", failover to the lower priority static route?
We have a l2tp/vpdn connection to a supplier which can be accessed via two vlans/routes. I would like to make one route the preferred one but the "route" to failover if the preferred route goes down.
Again, many thanks in advance for all responses!
Thanks
JohnHi John,
Hope the below explaination will help you...
R1(config)# ip route 0.0.0.0 0.0.0.0 2.2.2.2
R1(config)# ip route 0.0.0.0 0.0.0.0 3.3.3.3 10
If you notice the Administrative Distance for the secondary route pointing to ISP2 is increased to 10 so that it becomes the backup link.
The above configuration with just two floating static routes partially accomplishes our requirement as it will work only in the scenario where the routers interfaces connected to the WAN link are in up/down or down/down status. But in a lot of situations we see that even though the links remain up but we are not able to reach the gateway, this usually happens when the issue is at the ISP side.
In such scenarios, IP SLAs becomes an engineer's best friend. With around six additional IOS commands we can have a more reliable automatic failover environment.
Using IP SLA the Cisco IOS gets the ability to use Internet Control Message Protocol (ICMP) pings to identify when a WAN link goes down at the remote end and hence allows the initiation of a backup connection from an alternative port. The Reliable Static Routing Backup using Object Tracking feature can ensure reliable backup in the case of several catastrophic events, such as Internet circuit failure or peer device failure.
IP SLA is configured to ping a target, such as a publicly routable IP address or a target inside the corporate network or your next-hop IP on the ISP's router. The pings are routed from the primary interface only. Following a sample configuration of IP SLA to generate icmp ping targeted at the ISP1s next-hop IP.
R1(config)# ip sla 1
R1(config)# icmp-echo 2.2.2.2 source-interface FastEthernet0/0
R1(config)# timeout 1000
R1(config)# threshold 2
R1(config)# frequency 3
R1(config)# ip sla schedule 1 life forever start-time now
The above configuration defines and starts an IP SLA probe.
The ICMP Echo probe sends an ICMP Echo packet to next-hop IP 2.2.2.2 every 3 seconds, as defined by the “frequency” parameter.
Timeout sets the amount of time (in milliseconds) for which the Cisco IOS IP SLAs operation waits for a response from its request packet.
Threshold sets the rising threshold that generates a reaction event and stores history information for the Cisco IOS IP SLAs operation.
After defining the IP SLA operation our next step is to define an object that tracks the SLA probe. This can be accomplished by using the IOS Track Object as shown below:
R1(config)# track 1 ip sla 1 reachability
The above command will track the state of the IP SLA operation. If there are no ping responses from the next-hop IP the track will go down and it will come up when the ip sla operation starts receiving ping response.
To verify the track status use the use the “show track” command as shown below:
R1# show track
Track 1
IP SLA 1 reachability
Reachability is Down
1 change, last change 00:03:19
Latest operation return code: Unknown
The above output shows that the track status is down. Every IP SLAs operation maintains an operation return-code value. This return code is interpreted by the tracking process. The return code may return OK, OverThreshold, and several other return codes.
Different operations may have different return-code values, so only values common to all operation types are used. The below table shows the track states as per the IP SLA return code.
Tracking
Return Code
Track State
Reachability
OK or over threshold
(all other return codes)
Up
Down
The Last step in the IP SLA Reliable Static Route configuration is to add the “track” statement to the default routes pointing to the ISP routers as shown below:
R1(config)# ip route 0.0.0.0 0.0.0.0 2.2.2.2 track 1
R1(config)# ip route 0.0.0.0 0.0.0.0 3.3.3.3 10
The track number keyword and argument combination specifies that the static route will be installed only if the state of the configured track object is up. Hence if the track status is down the secondary route will be used to forward all the traffic.
Please rate the helpfull posts.
Regards,
Naidu.
Maybe you are looking for
-
I just bought a Mac this month and I wanted to watch some movies on it. I tried 3 different DVDs and the DVD player kept 'closing unexpectedly', but it opens fine if I don't have a DVD inserted. The DVD player is version 5.6. How do I fix this?
-
Netapp Docs connect error with cDOT
When trying to run NetappDocs against a cDOT array the script returns the below error. I'm able to SSH in via putty. PS C:\Users\t15jr5p> Get-NtapClusterData -Name '10.72.66.82' -Credential (Get-Credential) -Verbose | Format-NtapClusterData -Verbose
-
I'm getting ready to purchase my very first Mac ever, and fiddling through the configuration page. I notice that for keyboard options, there is a Japanese setting. I am a native Japanese speaker, and while I type in Japanese quite frequently, I absol
-
Credit Card issue to create Deliveries
Hi, Hereu2019s the situation. We have 2 types of Orders. DROP SHIP ORDERS - The part to be shipped is actually in an inventory managed location. No transfer order need to be created. This sales order has a Credit Card that is denied. NOTE: The order
-
Library doesn't show up after attempted upgrade
Error 1324 the path to my pictures contain invalid entry, is what it says when it gets ready to install 6. Now I can't access my library, any thoughts?