I updated my linux mint , now i am unable to watch youtube videos, i am gettign a black screen with no icons!

I updated my linux mint , now i am unable to watch youtube videos, i am gettign a black screen with no icons!

Try updating Firefox if this fails check flash then try uninstalling and reinstaling both Firefox first using Firefox sync to backup favorites etc first then if this fails try display apt-get update Firefox if this doesn't work then the month upgrade is conflicting with firefox

Similar Messages

  • TS1363 while updating my IOS to IOS 6 the updating process couldn't be completed for unknown reason and my iphone has nothing but a black screen with an apple and a meter that shows no progess. it completely froze!

    When updating my IOS 5.1.1 to IOS 6 and after the download completed the updating of the iphone couldn't be completed for unknown error and the device froze and all i have now is a black screen with an apple and a meter that shows no progress I can't switch off my iphone or do anything!!!

    Hi,
    I had a similar problem last week with my nice shiny 3 week old iPhone 6. I noticed the Apple logo was on the screen, but it did not progress like a normal boot up. I restarted the phone, and it showed the Apple logo, then a red screen then cycled back to the logo and kept looping. I got the phone to the iTunes connection stage by keeping hold of the power button and the home button until the apple logo appeared then kept holding the home button. iTunes recognised the phone, and wanted to restore, but this was unsuccessful  because the phone would keep looping to the red screen and iTunes failed. After loads of Apple support, I was told it was a hardware failure, and like you I live more than an hour away from the store. None the less, I made an appointment with the Genius bods, and they replaced the phone. They said they had never heard of the problem, but really, take a look at these forums and you will see that it is a common problem and I suspect they are keeping it under wraps...
    My issue is that as a disappointed customer with faulty goods, why should i have to stick to an appointment to get it replaced? What other store would you have to do this?
    The "Genius" didn't even want to see the phone powered up before offering a replacement... Oh, and it turned out they didn't have the exact same model as a replacement so they were going to send me out of the store empty handed.... I kicked off BIG time, and they very reluctantly gave me a phone from the sales stock, rather than the repairs stock..
    Not a happy Apple customer anymore, and I feel the more people who know about the lack of service and customer care the better. They need to get off there high horse and join the real world!

  • I plugged my iphone into itunes on a new computer nothing happened and now even when i unplug it, its just a black screen with itunes icon and a usb...someone please help?

    We got a new computer so i plugged my Iphone4 in, nothing happened so i unplugged it now its just a black screen with the itunes icon & Usb and i cant turn it off or get on anything?
    PLEASE HELP!

    Plug in your phone and launch iTunes on the computer. Then in the sidebar look for something about an iPhone. Click it and set up your iPhone. Has this iPhone ever been synced with another computer?

  • I have a pc with vista. I downloaded and watched a ton of movies now when i try to watch any of them i get a black screen and itunes shut down.

    I have checked my system requirements i have unistalled itunes and quick time from my computer and reinstalled everything and now i still have the same problem. i try to watch a movie the screen goes black and then a windows box pops up stating itunes has stopped working and they are checking for a solution. The solution is the same i need to download the new itunes from apple. i did this same problem. any suggesttions?????????

    Try the following user tip from b noir:
    iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows
    tt2

  • Update failed... Now I have grey screen with flashing icons. Please help!

    I was installing an update for Leopard and I wasn't connected to a power source. I thought it would be ok because I had a full battery. The screen was half closed over also so it may have switched off during update. Whatever happened, now my MacBook Pro won't boot up. I get a grey screen with a series of flashing icons one at a time (apple logo, circle with line through it and a folder with a question mark).
    The other problem is that my system disks are in my friend's house a thousand miles away so I can't boot up from my system disks. Can anyone offer any advice please? I'm desperate!

    If you can start up in target disk mode, connect your computer that works to the one that doesn't. (I'm assuming you have another computer since you can't get to the Apple Discussion Forums with a computer that won't start up!)
    Use the computer that doesn't work as an external drive to the one that does.
    Go to this part of the Apple Downloads website and find the update you were installing. Download it as a standalone installer, and try to install onto the external HD. If it works, problem solved!
    If it doesn't work, you'll need to follow Alexandre's advice and go to the Apple Store to get working installation discs. However, you can have access to your important files whenever you want them by simply using Target Disk Mode.

  • HT1414 I tried to do an update in the settings mode and now my ipad is frozen with a black screen with itunes app in the middle and showing to plug in the charger. Nothing is happening and tried turning off device and still nothing.

    Ipad locked up while trying to do an update. Don't know how to fix and can't use ipad at all. Black screen with itunes app in the middle of screen and it shows picture of charger that it wants me to plug in. Nothing works.

    You are in recovery mode, you need to restore it through iTunes on your computer. Follow the article you linked from.

  • Desktop stuck at black screen with cursor in normal mode but boots fine in safe mode after updates.

    After running some updates the other night my laptop stopped loading the desktop and just gets stuck at a black screen with a cursor after I log in to the user account. The only thing I can do from there is do ctrl+alt+delete, then log off or restart.
    I can't open up task manager. I tried creating another account in safe mode thinking there was an issue with the account but I still have the same issue. In event viewer I have two warnings one is
    event 6000 winlogon, The winlogon notification subscriber <GP Client> was unable to handle the notification event
    and event 4006, winlogon The windows logon process has failed to spawn a user application. Application name. Command line parameters: C:\Windows\system32\userinint.exe.
    As well as error event id 1003, CertificateServicesClient Certificate Services Client failed to invoke the Providers in response to event 512. Error code 2147956401
    and error 1001, certificate services client. certificate services client failed to load provider pautoenr.dll. error code 14001. I checked the registry and the path points to the right directory for userinit. I have tried running
    System Repair but no errors were found, and I ran sfc /scannow and no errors were found either. The computer did not have System Restore enabled and I do not want to restore to factory settings. I also ran registry mechanic and it found no errors. Any suggestions
    besides restoring to factory settings?

    Hi,
    We may try to reinstall Windows 7 Service Pack 1 for a test.
    In addition, let us perform the following steps.
    1. Click Start, Run, type lusrmgr.msc then ENTER.
    2. Select Groups in the left pane.
    3. Double-click Users in the right pane.
    4. Click Add, and then click Locations. Scroll to the top of the Locations dialog and select the local computer name, then click OK.
    5. In the Enter the object names to select field, type Interactive; Authenticated Users (separated by a semi-colon). Then click OK.
    6. Restart the computer.
    Or we can run the following commands from a command prompt:
    Net localgroup Users Interactive /add 
    Net localgroup Users "Authenticated Users" /add
    Kim Zhou
    TechNet Community Support

  • HT5858 I have had difficulty launching sites from within my email messages.  So, in trying to revert to the default settings on my iPad I went into "Settings" and reset everything.  Now, I have a black screen with a white apple and a white line!  What do

    For the last severl weeks I have had difficulty launching sites from within my email messages.  Thinking that I may have gone into "Settings" and set something wrong, I decided to reset to the default settings.  So, in "Settings" I chose reset everything.  Now, when I turn my iPad on all I get is a black screen with the picture of a white apple and a white line below it.  Nothing else works.  What can I do?  Do I need to send this back to Apple to be restored?

    You will hopefully be able to restore it yourself. It sounds like you erased all constant and settings rather than resetting all settings. But I'm basing my theory on the fact that you are seeing the Apple logo with the white progress bar (the white line) on the screen. That's what you would see if the software was being reinstalled and then it stopped on you. If that is what happened, you need to restore again and most likely need to use recovery mode.
    You can read about recovery mode here.
    Recovery mode - Apple
    However ...... If you are seeing the white line when you turn the iPad, let it go for twenty minutes or so, before you try restoring again. There is possibility that the software is still be installed and it can take a while before you see that white line move at all indicating that progress is being made.
    Frankly, I don't think that the software is still being installed, but since you didn't say specifically how long the iPad has been like this, it could just be that the software hasn't finished installing yet. If you know better - meaning that it's been like this for hours or longer, then you do need to restore the device.

  • How to ensure Firefox stays updated in Linux Mint 17 - Qiana

    I happen to have dual OS, Windows OS 7 & Linux Mint 17 (Qiana). I love Linux Mint more than Windows 7. If only I could move away completely from Windows I would be the happiest person on the face of the earth. But unfortunately we're not there yet. e.g. under Windows Firefox tends to update itself, the moment new version is released by Mozilla. But the same doesn't occur with Linux Mint, instead it keeps on listing various error messages.
    At present, under Linux Mint I'm using v33, which Linux Mint says is the latest. Whereas v34 is available on Mozilla site. If I've to update FF from 33 to 34, I've download it then either uninstall v33 + install v34 OR install v34 & hope that it overwrites v33 & hope there aren't two versions running on my OS.
    Why can't it is capable to renew like in Mac or Windows, where I go to Help/About Firefox/Update (directly from that panel)?
    By the time FF v34 is available for update under Linux Mint, there will be another version, which will obviously have more security patches.
    One thing I want to clarify, I'm not here to blame any person or group, If I'm able to help I would love to, but this is beyond my expertise, so I'm just trying to raise the issue for the concerned expertise to work towards benefit of all the netizens. If you do have any runaround to this I would really appreciate the feedback. Also this is the first time that I'm voicing my concern, so if I've offended someone, even inadvertently - I apologise.
    Thank you

    Linux Mint controls the updates for their version of Firefox that comes with their operating system. It is controlled through their repository.
    You could install the Linux - Firefox version that comes from Mozilla directly, to have updates done by Mozilla on the Mozilla schedule.
    https://www.mozilla.com/en-US/firefox/all.html

  • Installed the ios 7.0.2 update to my iphone 4, now it is stuck on a screen with itunes icon and power plug.  is this corect? I am unable to use the phone now.  What should i do next? I plug in to itune in my computer and ask me to restore my phone?

    installed the ios 7.0.2 update to my iphone 4, now it is stuck on a screen with itunes icon and power plug. 
    I am unable to use the phone now.  What should i do next? I plug in to itune in my computer and ask me to restore my phone? I will loose all my date?

    I hooked up itune and restore.  after finished restores, it said my phone is in recovery mode and needs to be finish before using itune, my screen still show the itunes icon and power plug

  • I just updated my itunes and now I am unable to open any of my songs... please help me.

    i just updated my itunes and now I am unable to open any of my songs... please help me. Every time i click it, it says it cannot be read because it was made by a newer version of itunes.

    Try resetting the Nano with it still connected to a high powered USB 2.0 port on your PC. To reset the iPod, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
    B-rock

  • I was trying to update my iPhone but now it is frozen on the black screen with the apple icon. It won't do anything

    I was trying to update my iPhone but now it is frozen on the black screen with the apple icon. It won't do anything. Any suggestions?

    Is your iphone hacked/jailbroken?

  • HT1222 i installed the ios 7.0.2 update to my iphone 4, now it is stuck on a screen with itunes icon and power plug.  is this corect?

    installed the ios 7.0.2 update to my iphone 4, now it is stuck on a screen with itunes icon and power plug.  is this corect? I am unable to use the phone now.  What should i do next?

    I hooked up itune and restore.  after finished restores, it said my phone is in recovery mode and needs to be finish before using itune, my screen still show the itunes icon and power plug

  • I have just updated my mac but now I am unable to open my itunes can someone help me please

    I have just updated my mac but now I am unable to open my itunes can someone help me please

    This worked for me:
    1 Go to the finder menu bar at the top of the screen
    2Click go
    3 click applications
    4 go down to iTunes and right click on Show Package Contents
    5 open contents folder then go to mac os folder
    6 open the terminal marked iTunes in that folder
    This should force it to open and function enough, it will not allow importing of music from a desk top

  • HT4623 I tried to update my phone this morning, and now it is stuck on a black screen with an apple in the middle.

    I tried to update my phone this morning, and now it is stuck on a black screen with an apple in the middle.

    Press the Power button and hold it down until the computer turns off. Restart. Do you still get the same result? If so, then try booting into Safe Mode, then restart normally. A safe mode startup takes considerably longer than a normal one, so don't panic. You will also see a progress bar at the beginning.

Maybe you are looking for

  • Good Receipt after Delivery Completion Indicator on

    Dear ALL, In our Client there is a setting that if Delivery indicator Tick is on then the system is allowing the Goods Receipt . I want that if Delv. indicator is on then System should not allow GR. Please provide the Config setting. Regards, Kapil.

  • Is it possible to trigger a web app operation by email?

    Is it possible to send an e-mail to a web application which would then trigger an operation to store its details into a database? For example, a company wishes to be added to the Yell.com online directory and so sends submits there details online. Th

  • Problem rendering Motion 2 project in FCP 5.0.2

    I have mutliple projects done in Motion 2, imported into FCP 5.0.2 timelines. All projects are in NTSC DV, 720x480 format. I am having a problem with rendering in FCP. I have one project that is a mostly static screen with one animated element, which

  • Hi want to convert .txt and .html into tif file(multipage)

    pls hlp with code bit. here my code bit      Object[] textToAdd = converter.readTextFile("d:\\test1.txt");                int fontSize = 20;                System.out.println("text length "+textToAdd.length);                converter.height = textToA

  • How to recover Apps if I changed computer

    Hello. Ever since I bought my Ipod I downloaded free and payed apps. I recently changed my computer and when I was about to backup my Ipod my Itunes crashed and when I wanted to sync it again it said I had to restore my Ipod to factory settings and t