I updated my printer driver but System Profiler still shows old version.

How can I force os x to use newest driver? My Brother hl2220 came with a driver version 3.1.3, but they showed an upgrade to 3.1.3b. I downloaded it and installed it, but System Profiler still shows 3.1.3 in use.

So you are saying the original DIMMs are there plus the ones you added, all were recognized before the repair but only the Apple-supplied after the repair.
Just trying to keep all of this straight in my mind.
In that case, you might try removing the DIMMs you installed and reinstalling, one at a time and see if they are recognized. If they are not, then they may have gone bad for some reason, who knows why, and it is time to look at the warranty you have from the people from whom you purchased the DIMMs.
If it was someone like Crucial or OWC (macsales) they are really good about their lifetime warranty.
If the warranty is lifetime, contact the supplier and see what the process is for replacement.
It is strange that both would work, and then fail. But stranger things have happened with computers.

Similar Messages

New RAM installed but System Profiler still seeing old RAM

Hi
Recently put in a new hard drive after the last one failed. The new RAM, equaling 3GB, was installed on my iMac C2D 24" BEFORE the failure. I got it back from the shop today and checked to see if the RAM was still recognised. The System Profiler is showing 1GB or RAM, 512 in each slot, and the serial numbers match the RAM that came with the computer originally.
I'm running Snow Leopard and haven't noticed anything running slow. Is this just a glitch in the matrix?

So you are saying the original DIMMs are there plus the ones you added, all were recognized before the repair but only the Apple-supplied after the repair.
Just trying to keep all of this straight in my mind.
In that case, you might try removing the DIMMs you installed and reinstalling, one at a time and see if they are recognized. If they are not, then they may have gone bad for some reason, who knows why, and it is time to look at the warranty you have from the people from whom you purchased the DIMMs.
If it was someone like Crucial or OWC (macsales) they are really good about their lifetime warranty.
If the warranty is lifetime, contact the supplier and see what the process is for replacement.
It is strange that both would work, and then fail. But stranger things have happened with computers.

Lockdown CF10 says update JVM, but admin info still shows old version: how do I sync it?

The lockdown guide for CF10 says to update JVM. After doing that on the machine, the CF administrator information still shows the older CF10 installation version. How do I sync the machine installation with CF10? Do I need a second installation in the ColdFusion10/jre folder?

First, you will need to get ColdFusion pointing back to the original JVM. Open the jvm.config file found at C:\ColdFusion10\cfusion\bin using a text editor. Near the top of the file, look for the line that starts with "java.home=". Change the path to "C:\\ColdFusion10\\jre" (don't use quotation marks around the path). Save and close the file. Now try starting ColdFusion.
Second, you can't use the Java JRE that comes in the standard Java consumer download. You need to download the Java SE Development Kit (JDK), which contains the JRE and some server components that ColdFusion needs. You can get the JDK here: http://www.oracle.com/technetwork/java/javase/downloads/jdk7-downloads-1880260.html. Download and install the appropriate JDK for your operating system. You should now have both a "jre7" and a "jdk1.7.0_XX" folder inside of "C:\Program Files (x86)\Java". Now follow Peter's suggestion on updating the JVM setting in CF Administrator.
-Carl V.

Ive changed my apple id. in my iPad and iPhone under iTunes it's showing the new id but under iCloud still shows old I'd. I have been told to delete account and add in new one but worried in case lose all my stuff that's already saved in iCloud. any idea?

Ive changed my apple id. in my iPad and iPhone under iTunes it's showing the new id but under iCloud still shows old I'd. I have been told to delete account and add in new one but worried in case lose all my stuff that's already saved in iCloud. any idea?

If all you did was rename your ID, you can go to Settings>iCloud, tap Delete Account, choose Delete from My iPhone when prompted, then sign back in with your renamed ID. Deleting the account only deletes the account and any data you are syncing with iCloud from your phone, not from iCloud. Provided you are signing back into the same account and not changing accounts, your data will be synced back to your phone when you sign back in.
If, however, you are changing to a new account with a new ID, choose Keep on My iPhone when prompted. Then choose Merge when you sign into the new account and turn your iCloud syncing back on to upload your data to the new account.
Before deleting the account, save you photo stream photos to your camera roll (tap Edit, tap all the photos, tap Share, tap Save to Camera Roll).

Downloaded latest VLC Web Plugin ver but Firefox still show old version

Downloaded VLC Web Plugin Version 2.0.5.0 and rebooted and restarted Firefox.
Firefox Plug Ins still shows old version 2.0.2.0.
When I check Firefox for latest version is says 2.0.2.0 is the latest and I'm up to date.
When I open VLC as a standalone it comes up as version 2.0.5.0.
Why is Firefox not incorporating the correct version?

Try to delete the pluginreg.dat file in the Firefox Profile Folder and maybe addons.sqlite as well to reset the plugin registry databases.
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder

I changed e-mail address but i-phone still shows old e-mail address when I try to download a new app.

I changed my e-mail address, but my I-phone still shows old e-mail address when I try to download an app and says my password is incorrect. How do I update my I-phone to my new apple id?

on your phone go to settings - app store - apple id - sign out - then sign in with your new email address.

I had a trial version and my purchased the full version but it is still showing trial version

I had a trial version and my purchased the full version but it is still showing trial version

Chat Now button near the bottom for Activation and Deactivation problems may help
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
or
Cloud Getting Started https://helpx.adobe.com/creative-cloud/topics/getting-started.html

Plug-in updated but profile still shows older version

I've spent most of the morning trying to update my Silverlight plugin to the latest version (5.1.10411.0) from the older version that's now blocked (5.0.61118.0). I've tried multiple downloads and installations, both with the plugin disabled and with it not disabled, and I've also manually removed the files Microsoft says to remove to manually uninstall Silverlight:
/Library/Internet Plug-Ins/Silverlight.plugin
/Library/Receipts/Silverlight.pkg
/Library/Receipts/Silverlight_W2_MIX.pkg
/Library/Internet Plug-Ins/WPFe.plugin
/Library/Receipts/WPFe.pkg
Finally, I created a new user on my Mac, opened Firefox in that user, and discovered that the Silverlight plugin was updated to (5.1.10411.0). I restarted the Mac, opened my regular user and Firefox profile... and the Silverlight plugin still shows as (5.0.61118.0).
I'm pretty sure that this is just a plist somewhere that's not updating. Any ideas of what I can do short of continually yanking out files, reinstalling, and hoping for the best?

Hello masinger and thanks for contacting us for solving your problem.
As we can see, your browser still reports Silverlight version 5.0.61118.0. That may mean that the update was not unsuccessful. Try to uninstall and install again Silverlight. Then restart your computer.
We might also require some technical information if that doesn't work on your computer. Please do the following if reinstalling Silverlight doesn't work:
*Click the Firefox button at the top left, then click the ''Help'' menu and select ''Troubleshooting information'' from the submenu. If you don't have a Firefox button, click the Help menu at the top and select ''Troubleshooting information'' from the menu.
Now, a new tab containing your troubleshooting information should open.
*At the top of the page, you should see a button that says "Copy all to clipboard''. Click it.
*Now, go back to your forum post and click inside the reply box. Press Ctrl+V to paste all the information you copied into the forum post.
If you need further information about the Troubleshooting information page, please read the article [[Using the Troubleshooting Information page]].
Thanks in advance for your help!

Updated to 10.10 but ABOUT screen still shows 10.9

I thought I updated to Yosemite 10.10.2, the update downloads, installs, and the machine reboots but when I check the OS version in the ABOUT window I see 10.9.5, did the OS update or not?

Duh! Posting the screen showing it did not update is exactly the point I was trying to make.
The questions seem to me to be is... 1) HOW can I download the update a file of over 5 gigs, 2) Have the system tell me it installed the update and... after the update is completed and BECAUSE it updated, 3) the machine reboots BECAUSE it thinks it UPDATED, but, and this is a big BUT, 4) the new screens and the ABOUT screen (and the OS) does NOT, repeat, DOES NOT, show that the system's OS really did update to the new version? This makes no sense!
So does anyone know... How can I do all of the right actions and get most of the right messages and have the OS NOT, repeat NOT update to 10.10.2? I have checked the software version using the UNAME -RSV (all lower case) and I get "Darwin 13.4.0 Darwin Kernel Version 13.4.0: Wed Dec 17 19:05:52 PST 2014; root:xnu-2422.115.10~1/RELEASE_X86_64", something that makes no sense to me with the OS supposedly being Yosemite 10.10.2 (although I am willing to concede that these two result will not, necessarily, match 100%) but... they should match SOME!
On the surface, this software update process appears to have bush league kind of performance with respect to code updates (i.e. it is a commercial package but it really does not appear to work!) but... from what I can tell from the data, the system did NOT update and I can not get it to work correctly. Also, what I can tell, there is nothing to do in the update process besides starting the update and letting it run its course, yet... I get non-sensical results.
So, does anyone know how or what I have to do, or could possibly have done wrong, to get this sort of non-sensical update result?
Thanks.

I have recently updated my apple ID but my icloud still shows my old ID, how do I change my old icloud ID to my new ID? if I cancel my icloud account wont it cancel my storage plans etc

I have recently updated my apple ID as I have a new email address. I did this successfully for ITunes but it seems my Icloud account is still showing my old ID, so how do I change my Icloud ID? someone has said to my just to delete the account but wont I lose my storage etc? All of this is being done on an Iphone 5, thanks for your help, Mike

Hello Becla,
After reviewing your post, I have located an article that can help in this situation. It contains helpful advice concerning iCloud accounts:
iCloud: Set up iCloud on your devices
http://support.apple.com/kb/PH2609
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

WSUS Server has hotfixes installed to upgrade Update Services and it's still showing old version

I have a Windows 2008 R2 WSUS server and when I go to help and About Update Service it is showing Version 3.2.7600.226. I have installed KB2720211 Version 3.2.7600.251 and KB2734608 Version 3.2.7600.256, they both show up under Installed Updates.
Is there somewhere else that would show a different Version number or am I missing something?
Thanks

Am 27.03.2015 schrieb ingy0309:
I have a Windows 2008 R2 WSUS server and when I go to help and About Update Service it is showing Version 3.2.7600.226. I have installed KB2720211 Version 3.2.7600.251 and KB2734608 Version 3.2.7600.256, they both show up under Installed Updates.
Is there somewhere else that would show a different Version number or am I missing something?
In Help Menu you have the wrong informations. Pls look at this Image:
http://www.wsus.de/images/wsus-version.png
Maybe you have to install more Updates for coming up to Version .274:
WSUS 3.0 (SP2):    Build 3.2.7600.226
WSUS 3.0 (SP2) + KB2720211:    Build 3.2.7600.251
WSUS 3.0 (SP2) + KB2734608:    Build 3.2.7600.256
WSUS 3.0 (SP2) + KB2828185:    Build 3.2.7600.262
WSUS 3.0 (SP2) + KB2938066:    Build 3.2.7600.274
Servus
Winfried
Gruppenrichtlinien
HowTos zum WSUS Package Publisher
WSUS Package Publisher
HowTos zum Local Update Publisher
NNTP-Bridge für MS-Foren

Download complete binery file executed but still showing old version of start page

I have been having this problem for a while, I update with the newer version of Mozilla firefox, 9.0.1 executable file, download the file, execute the binery file, run the update, when all is complete firefox asks to open the start page and the old firefox start page is still showing telling me that my version is no longer supported by google

If you have install 9.0.1 version, you have useragent problem, because your useragent tell us that you have 3.5.5 version (Mozilla/5.0 (Windows; U; Windows NT 5.1; en-GB; rv:1.9.1.5) Gecko/20091102 Firefox/'''3.5.5''' ).
check the version in '''Help''' then '''About firefox''', if you have 9.0.1 see how to fix user agent: in [https://support.mozilla.org/en-US/kb/Websites%20or%20add-ons%20incorrectly%20report%20incompatible%20browser Websites or add-ons incorrectly report incompatible browser ] find '''Reset your user agent''' and follow the steps.
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Update doesn't work. Tried several times but still shows old version of Mozilla and of adobe Acrobat..

I have version 3.6.7 and History shows it has not been updated in two years. (I was using IE for a while but switched back to Mozilla a couple of weeks ago, but I can't get it to Update. It shows that the update has downloaded but it doesn't get activated. I also downloaded Adobe Acrobat update from the Mozilla plug-in page and that also did not seem to "take". What can I do?

Try the following:
Update Firefox by going to [http://www.getfirefox.com www.getfirefox.com]. Download the newer version of Firefox, and install it over your current Firefox install.
Then, read [[Websites say that Firefox is outdated or incompatible even though it's the latest version]], follow all directions there.
after doing that, download Flash 11.4 from [http://download.macromedia.com/pub/flashplayer/current/support/install_flash_player.exe http://download.macromedia.com/pub/flashplayer/current/support/install_flash_player.exe] and install it (close firefox first)

Larger image changed, but smaller thumbnails still show old image

Hi,
I want to change the image for my podcast. I added the new image to my server and added an image tag to my rss file pointing to it. Now in the iTunes store, the larger thumbnail shows the correct image, but the smaller thumbnails in the store show the old one. Do I just need to wait longer, or is there something else I have to do?
Feed = http://feeds.feedburner.com/walkingdeadcast
Thanks!
Jason

For some reason the thumbnails in the Search results take longer to update than the image on the Store page. They're both drawn from the same tag in your feed, so there's nothing you can do except wait: it will probably sort itself out in a day or two.
Edit: actually I just searched on your podcast title and the search results showed the same image as the main Store page.
Another edit: I assume you are talking about the Search results, not what you see when you subscribe? Those images are embedded in the media files, not referenced in the feed. I just downloaded one of the episodes on subscription and I see it has a different image. In order to change this you will have to embed new images in every episode and re-upload them - see here.

I have downloaded the latest pages update on my iPad, but my iMac still has version 4.3 and I cannot find out how to update it only desktop. When I try to send something from my iPad pages to via email to be opened on my desktop in Pages, it won't open P

I have downloaded the latest pages update on my iPad, but my iMac still has Pages version 4.3, and I cannot find out how to update it on my desktop. When I try to send something from my iPad pages via email to be opened on my desktop in Pages, it won't open in Pages. I get a message that it can't be opened because the version is too old. I sent the document as a PDF and it worked. But I want to be able to use Pages back and forth. HOw do I update the Pages version on my desktop iMac?

The file format used by the iOS versions of the iWork apps can only be read by the new iWork apps on your Mac - i.e. Keynote 6, Pages 5 & Numbers 3. Those versions for the Mac require Mavericks, OS X 10.9. The "too old" error on a Mac comes if you are trying to open an iWork '08 or earlier file in the newest apps. If you do have the newest apps you can open the files from your iPad.
If you can't or don't want to upgrade to Mavericks & the newest iWork apps your best option would be to export/share the files from the iPad to a type an older version of iWork can read such as Word, text, Excel, etc.
Or contact AppleCare. They made this mess, let them fix it.

I updated my printer driver but System Profiler still shows old version.

Similar Messages

Maybe you are looking for