I updated my T21 with XP service pack 3- now my disk in my disk caddy no longer works ;-(

I just updated my Thinkpad T21 with XP service pack 3. Now it seems the spare hard drives that I use in my disk caddy for backup call in to Device Manager but show as unreadable and will not show in "My computer".
Has anyone else had this problem. I use the second drive to do full saves using Ghost to perform a disk copy.
Message Edited by PatRetired on 12-10-2008 03:07 PM

Uninstall SP3 and see if it comes back.
T60 2623-D7U, 3 GB Ram. Dual boot XP and Linux Mint.
T400 2765-T7U Windows 7
Registered Linux User #160145
FYI: I am not employed by Lenovo

Similar Messages

Apple Mobile Device Service (AMDS) won't install with iTunes,either V10.7 or V11. The service can't be started b/c the software is not there. Windows 7 with latest service pack. V11 iTunes installs

Apple Mobile Device Service (AMDS) won't install with iTunes,either V10.7 or V11. The service can't be started b/c the software is not there. Windows 7 with latest service pack. V11 iTunes installs fine, iPod found, no iPhone 5 b/c no AMDS. Error "insufficient premissions to install AMDS" Tried numerous uninstall / reinstall combinations, installed iTunes as administrator, etc. Somethings not right. What the Heck ?

See the following article for dealing with Apple Mobile Device Services: http://support.apple.com/kb/TS1567
Downloading and installing iTunes will not fix this problem. If the other troubleshooting steps do not work, go to the Control Panel and uninstall iTunes, Apple Mobile Device Services, Quicktime and any other Apple program that might be present. Reboot your computer, then download and install the latest version of iTunes.

HT204150 one of my friend updated her iPhone with my apple id and now her contacts are inside my iPhone , she has deleted my contact which has been i her contact , how can i bring back my contact ?

one of my friend updated her iPhone with my apple id and now her contacts are inside my iPhone , she has deleted my contact which has been i her contact , how can i bring back my contact ?

Welcome to the Apple Community.
The first thing you should do is have your friend log out of your account and change your password.
Do you have a back up from when you had the contacts on your phone.

I updated my iPad with 8.0 ISO and now 2048 game is super slow...help!!!!

I Updates my iPad with ISO 8.0 and now is is acting up...for instance game 2048 is super slow!!!! Can anyone help?

iPad running slow? How to speed up a slow iPad
http://appletoolbox.com/2012/07/ipad-running-slow-how-to-speed-up-a-slow-ipad/
If You Think iOS 7 Feels Slow Here’s How to Speed It Up
http://osxdaily.com/2013/09/23/ios-7-slow-speed-it-up/
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7-8 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7-8 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
 Cheers, Tom

I recently updated my iTunes with the lates version but now it does not detect my iPhone 5 which it was working with the old version!!!

I recently updated my iTunes with the lates version but now it does not detect my iPhone 5 which it was working with the old version!!!

Hi, M_ghaderi.
Thank you for visiting Apple Support Communities.
If your device is not recognized by iTunes, I would recommend the steps in the article below. Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iPhone, iPad, or iPod touch not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H.

My iPad Mini with retina display suddenly will not connect to the Internet. It shows full wifi bars, yet no web pages will load. My Internet is working with all other apple devices in my house. The iPad also no longer works with celluar data.

My iPad Mini with retina display suddenly will not connect to the Internet. It shows full wifi bars, yet no web pages will load. My Internet is working with all other apple devices in my house. The iPad also no longer works with celluar data. I'm not sure what has happened. It was working fine a few hours ago. I have tried resetting it, ive restarted my browser etc. I tried to erase all data from my Ipad but I can't do that because it needs to sign into my Apple ID and use the Internet!

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Should I run a Full Crawl after running psconfig after updating Sp2013 with a Service Pack or Cumulative Update

Hi
Should I run a full crawl after I have performed a Service Pack Update or Cumulative Update and run psconfig wizard?
The best practise coming out of Microsoft says you should only run a full crawl after a configuration change.
You should then run a continuous crawl thereafter.
The question then becomes is a Service Pack Update / Cumulative Update followed by psconfig wizard (or the PowerShell equivalent) considered to be a configuration change.
We were recently advised by Microsoft to install the July 2014 CU (and then run psconfig).
After that the continuous search did not pick up newly created files until a full crawl was run.
So should I run a full crawl after I have installed a Service Pack or Cumulative Update and run psconfig ?
Thanks
Nigel
Nigel Price NJPEnterprises

Hi Nigel,
The situations when you need to do full crawl is listed here,
A Search service application has just been created and the preconfigured content source
Local SharePoint sites have not been crawled yet.
Some other content source is new and has not been crawled yet.
A software update or service pack was installed on servers in the farm. See the instructions for the software update or service pack for more information.
A Search service application administrator, site collection administrator or tenant administrator added a new managed property or changed an existing managed property. A full crawl is required for the new or changed managed property to take effect.
You want to detect security changes that were made to local groups on a file share after the last full crawl of the file share.
You want to resolve consecutive incremental crawl failures. If an incremental crawl fails a large number of consecutive times at any level in a repository, the system removes the affected content from the search index.
Crawl rules have been added, deleted, or modified.
You want to repair a corrupted search index.
The credentials for the user account that is assigned to the default content access account have changed. A full crawl is required only if the permissions of this user account have changed.
My opinion is, it is always better to do a full crawl after a successful installation of service packs or product upgrades.

Itunes wont Open with Vista Service pack 2

My itunes stopped working a while ago and so i decided to delete it, i then reformatted my laptop and reinstalled vista back to the way it was when i first got my laptop and by wonders itunes worked. However since i have completed the updates that windows has given me, including service pack 2 it has stopped working again due to date execution prevention. does anyone know how i can solve this issue

This is a worldwide issue with several audio drivers after a recent Windows update. Microsoft's website shows a disclaimer saying that it is not responsible and that we should approach the Original Equipment Manufacturer about the problem. Obviously, our OEM is HP who, to date, have neither communicated a fix to their customers, nor have they issued a recall. <text deleted>
Please see the other thread in this forum entitled: HP Quicktouch On Screen Display has stopped working and no audio output device is detected.
Message Edited by WendyM on 10-21-2009 07:06 AM

Airport extreme with windows service pack 2

I have just recently bought a macbook pro laptop, & have been corresponding with a forum member about a wireless setup.
I want to have a wireless set up with a PC desktop with windows xp home service pack 2 that is stationed in the kitchen. This was recommended to me in this forum. Right now the PC has an Ethernet black box, with at&t DSL service. It has one yellow Ethernet cable coming from the black box to the PC & one grey DSL cord coming out of the black box & connects to a phone in the kitchen. I bought the laptop for my online classes so steady reliable internet service is crucial. Upon reading the specs of the airport extreme however got me a little concerned about which service pack I can use.
Here is my question & comment from another member on this forum;
I just noticed a PC has to have windows service pack 3, I have service pack 2, will it work with service pack 2? I am reluctant to update to service pack 3, my story behind my reluctance; the last time I did it, my PC completely crashed, the hard drive died. It had to be replaced, & ever since I get a little yellow alert to update to service pack 3, but I have not done it out of fear of another meltdown. Right now it is the only computer in our house, & I need it for my online classes. Last summer when I tried the service pack 3 update, & subsequent PC meltdown, I had to go to a public computer lab to finish off an online class, so I do not want to go through this again.
And this is what they said;
+That will give you wired internet access at the PC. Of course, the MacBook Pro will be wireless. I am not sure about the technical specifications required for the Airport. My initial reaction is that you should be fine to use the Airport as just a router with the PC with Service Pack 2. I think SP3 is just required for administration of the Airport using the Airport Utility for Windows. But, you could administer the Airport with your MBP. You may want to confirm this in the Airport forum unless somebody else here knows for sure! Sorry!+

Which would be more powerful & reliable? the newest airport extreme or the aiport with the 500GB time capsule?
Again, it will depend on what your networking requirements are. If we are talking about support for Time Machine backups, then only the Time Capsule (of the two options you listed) would work. Apple doesn't currently support these backups to drives attached to the AirPort Extreme Base Station.
Would I be better off with something that is just for wireless internet? or a combo unit time capsule & airport?
If you don't have any networking gear now, then it may make better sense to go with a combination unit.

Making the WMB54G work with Vista (Service Pack 1) - it does work.

I posted this in response to a thread, thought it could use its own topic.
There is hope and potential success for Vista users!   I got the WMB54G 2 days ago. I spent 6 hours with it and nearly threw the product AND my computer out the window the first night. I scoured this forum for the past two days, and by putting pieces together from various threads, I'm now using the Music Bridge successfully with my 1 month old Dell XPS M1530 with Vista Home Ultimate with Service pack 1.  Once I had my gameplan, it worked perfectly the first time I tried the new approach. I will try to write a step by step process of what I did in the next few days but for now.....
1. Throw out the installation CD that comes with the music bridge (its useless for Vista).... I'm kidding, but you get the point.
2. You HAVE to dowload the Vista compatible installation utility and Firmware upgrade from the Linksys forum - I don't have the link right now, but its here in this forum.
3. Run the Vista driver setup to install the Musicbridge utility - the "Install utility" link at the bottom of the setup screen, but DO NOT try to configure the router since you'll just have to do it again later.
4. Run the firmware upgrade for the router (it behaves exactly like the setup utility, but instead of configuring the hardware for use, it upgrades the fimware)
5. Run the Vista driver setup to configure the router (only after the firmware upgrade).   I didn't have to do anything outside of the auto setup. i'm using a Linksys wireless G router as well, and it connected with 64 Bit WEP encryption no problem once i entered my encryption passphrase.
6. Open up MSCONFIG and disable the CMFLYWAVE Application on Startup
7. In your Program Files directory, find \Linksys\wmb54g\wmb54g.exe, \Linksys\wmb54g\driver\cmas2ds.exe, and \Linksys\wmb54g\driver\cmflywav.exe - For all three files, right click and go to Properties\compatability.   Check the "Run this program in compatability mode for:"   pick XP with SP 2.
THANK YOU SO MUCH TO THE PEOPLE WHO POSTED THAT LAST BIT!!!!
8. I'd suggest restarting the computer now.
9. You might get a "WMB54G.exe has stopped running error" on restart... that's ok
10. Start the following files in this order:
cmas2ds.exe
cmflywav.exe
wmb54g.exe
11. The utility should start, and then you can connect to the bridge via the system tray icon. - you might have to also set the default audio device to the Music Bridge by right clicking your system tray speaker icon
12. Uncheck the "Start the Music Bridge when I start Windows" option in the utility screen - and execute the three files in step 10 each time you restart.
I hope this works for you.
Solved!
Go to Solution.

I finally got my WMB54G to work with Vista SR1. It took me 4 hours of struggling to figure it out though.
What I did was:
1. Download the latest utility and firmware from the linksys support site.
2. To set up the device, preferably use http://192.168.1.210. There are http setup instructions on the linksys customer service site. Alternately, you can use the setup wizard on the CD but I would recommend avoiding it if you can. If you do use the setup CD and it installs the WMB54G utility, promptly uninstall the utility afterwords and restart the computer.
3. Update the firmware to v.2.18 by using http://192.168.1.210 and going to the HELP tab
4. Install the latest utility from the support site but do not run the main setup. Simply run setup.exe in the utility folder AND GIVE IT PLENTY OF TIME. Walk Away and let the installer finish and close. Then do the thing people discovered -- edit the properties of C:\Program Files\Linksys\WMB54G.exe and make sure it is set for running in XP compatability mode.
5. Restart the computer
Mine started working fine after I did all of this -- the WMB54G came up automatically and found the device. Keep in mind I do not have WEP or anything -- just unsecured wireless.
Good luck.
Mike
Message Edited by jmfife on 01-17-2009 10:51 AM
Message Edited by jmfife on 01-17-2009 10:54 AM
(Mod Note: Edited due to non-compliance of forum guidelines.)
Message Edited by giantherockstar on 01-17-2009 11:05 AM

With Vista Service Pack 2 NO SOUND on HP530 with Conexant High Definition SmartAudio HD2.

Last night I installed Vista service pack 2. Now I get the message "No audio output device is installed".
Drivers are up to date - that is, there are no new drivers for this Vista release to be found (yet).
Tried to roll back as suggested in another post. However, no new driver was installed so no roll back.
It looks as if Vista SP2 needs new drivers from HP. Does anyone have any suggestions??
Btw, HP instant support reports "the information you entered is not of a currently supported mode". Bought that model 1,5 year ago..... ;-(

This is a worldwide issue with several audio drivers after a recent Windows update. Microsoft's website shows a disclaimer saying that it is not responsible and that we should approach the Original Equipment Manufacturer about the problem. Obviously, our OEM is HP who, to date, have neither communicated a fix to their customers, nor have they issued a recall. <text deleted>
Please see the other thread in this forum entitled: HP Quicktouch On Screen Display has stopped working and no audio output device is detected.
Message Edited by WendyM on 10-21-2009 07:06 AM

Trouble with Windows Service Pack 1 ?

I am using
Adobe CreatePDF, and because I am using it with a musical notation software program
, Finale, I have to use the Adobe Desktop Printer, to convert the file
s. This has worked very well for a couple of months but, the other day I attempted to us
e it and it doesn't work. I contacted Adobe, through their online chat room and a
fter trouble shooting my computer, the tech said that the Adobe Desktop Printer does not work
now with Windows 7, Service Pack 1. They are working on the problem. Has this been addressed on the forum yet? I'm sorry, but I couldn't find it if it has. Anyone else having this problem. It's really put me in a bind. How are we to know when the issue has been addressed?
Thanks.

I'm sorry, in the Subject Window, I neglected the "7". It's Windows 7, Service Pack 1.
Thanks.

SharePoint 2013 Update Workflow Manager problems after Service Pack 1

Hello guys,
I've installed the service pack 1 for SharePoint 2013 and then I tried to update the workflow manager, but I always get an error message that the workflow manager could not be updated!
Is the installing order wrong? should I first install the update for the worklfow manager and then the update for SharePoint 2013?
Best regards
Matthias

The error message see below for "Cumulative Update for Workflow Manager 1.0 (KB2799754)
"One of the custom actions failed. The installation cannot continue. See log for details!"
[06/06/14 09:48:44] Performing install.
[06/06/14 09:48:44] At least one of the product packages has been detected.
[06/06/14 09:48:44] preReqUpdateDisplayName is :
[06/06/14 09:48:44]
[06/06/14 09:48:44] Wizard mode on.
The following products will be enhanced:
Workflow Manager 1.0
Attempting to open cached Msi package for product code: {04A7199E-565D-4654-88A3-80A9A7BADDD9}
Successfully opened cached Msi package.
[06/06/14 09:48:48] Opening Service Control Manager...
[06/06/14 09:48:48] Operation succeeded.
[06/06/14 09:48:48] Copying files...
[06/06/14 09:48:48] Checking and creating target directory C:\ProgramData\Microsoft\E-Business Servers Updates\Updates\Uninstall2799754.
[06/06/14 09:48:48] Package Workflow Manager Client 1.0 is not installed. Skipping it.
[06/06/14 09:48:48] Package Workflow Manager Client 1.0 is not installed. Skipping it.
[06/06/14 09:48:48] Package Workflow Manager 1.0 is installed.
[06/06/14 09:48:49] Copying file AppServerV1-WorkflowManagerpatch30.msp ...
[06/06/14 09:48:49] Operation succeeded.
[06/06/14 09:48:49] Copying file AppServerV1-WorkflowManagerpatch30.msp ...
[06/06/14 09:48:49] Operation succeeded.
[06/06/14 09:48:49] Copying file TargetWFVersion.txt ...
[06/06/14 09:48:49] Operation succeeded.
[06/06/14 09:48:49] Copying file UnifiedWFHotfixUpgrade.PS1 ...
[06/06/14 09:48:49] Operation succeeded.
[06/06/14 09:48:49] Copying file Setup.xml ...
[06/06/14 09:48:49] Operation succeeded.
[06/06/14 09:48:49] Copying file Setup.exe ...
[06/06/14 09:48:49] Operation succeeded.
[06/06/14 09:48:49] Package Workflow Manager 1.0 is installed.
[06/06/14 09:48:49] Package code is {04A7199E-565D-4654-88A3-80A9A7BADDD9}.
[06/06/14 09:48:49] Executing preinstall custom actions. 1 actions to execute.
[06/06/14 09:48:49] Starting process "C:\Windows\system32\..\sysnative\windowspowershell\v1.0\powershell.exe" -NoLogo -NonInteractive -NoProfile -WindowStyle Hidden -ExecutionPolicy RemoteSigned -File UnifiedWFHotfixUpgrade.PS1 -HotfixType "CS" -PackageType
"server" -opcode "PatchBefore" -platform "x64" ...
[06/06/14 09:48:50] Process exit code is -1.
get-itemproperty : Cannot find path 'HKLM:\Software\Microsoft\Service Bus\1.0'
because it does not exist.
At C:\ProgramData\Microsoft\E-Business Servers
Updates\Updates\Uninstall2799754\UnifiedWFHotfixUpgrade.PS1:971 char:21
+ $sbinstallpath = (get-itemproperty "HKLM:\Software\Microsoft\Service
Bus\1.0" ...
That's the log file
Best regards
Matthias

CS5 Installation with WIN7 Service Pack 1

I just installed Service Pack 1 for Windows 7, and now my DVD Drive won't recognize the install disc for Photoshop CS5. It read and installed fine before adding the service pack, and other computers read the disc fine so I know the Disc is not damaged. Help?

This is a registry problem. Something with High and Low filters. You can easily find it on the web. Also check the hardware settings in your device manager. It may be running in compatibility modse. You may need a vendor specific driver for the optical drive rather than Windows' standard driver that you didn't install. That would also extend to the SATA controlelr the drive is hooked up to...
Mylenium

Can't upgrade I tunes because of problems with Windows Service Pack 2

My daughter and I got shuffles for Christmas. I am unable to upgrade to the necessary version of I tunes because I do not have SP2. When I try to download the windows service pack 2 my computer crashes. Any suggestions? Are there any ways around this?

Hi there
It could be that this particular file has some corruption. It could also simply be that the number of objects in the file is somewhat taxing your PC resources.
You might try what is outlined in the link below and see if it helps anything.
Click here to read
The post you are likely interested in was made by Jayashree and involves tweaking a setting in the Windows Registry.
Cheers... Rick
Click here for Adobe Certified Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

I updated my T21 with XP service pack 3- now my disk in my disk caddy no longer works ;-(

Similar Messages

Maybe you are looking for