I updated SCCM 2012 R2 from CU3 to CU4. Where can I find good directions on what else I need to do to make this work?

I updated SCCM 2012 R2 from CU3 to CU4. Where can I find good directions on what else I need to do to make this work? I'm assuming I have to deploy the new clients?
Thanks,
James
James A+, Network+, MCP

You have to create different collections (x64 vs x86 clients) because the .msp to be deployed is architecture specific.
"Distribute content" just distributes binaries to distribution points. You can select a collection there, but that has nothing to do with clients. It just distributes content to DPs that are assigned to collections.
Torsten Meringer | http://www.mssccmfaq.de
Ok. That is helpful. I appreciate the response. I hate to ask another question, but I', still learning the product. In the Step-by-Step SCCM 2012 R2 CU4 Installation Guide from System Center Dudes, it says to create the collections by using their predefined
queries. I tried to enter these as queries but I think I am doing so in the wrong area of the collection creation process. Could you break it down for me?
Do you know of any good training (free) that is video based an breaks SCCM 2012 R2 down into smaller more detailed steps?
Thanks,
James
James A+, Network+, MCP

Similar Messages

I just got my Mac back from Apple repair and I can't burn a disc. What do I need to do to make that happen?

I just got my Mac back from Apple repair and I can't burn a disc. What do I need to do to make that happen?

Hello deneye2112,
Thank you for providing the details of the burning issue you are experiencing. I found some resources that I think might help:
First, I recommend resetting the System Management Controller (SMC) on your Mac (I wasn't sure if you had a removable battery or a built in battery, so I listed the steps for both):
Resetting the SMC on Mac portables with a battery you can remove
Note: Learn about removing the battery on MacBook and MacBook Pro.
Shut down the computer.
Disconnect the MagSafe power adapter from the computer, if it's connected.
Remove the battery.
Press and hold the power button for 5 seconds.
Release the power button.
Reconnect the battery and MagSafe power adapter.
Press the power button to turn on the computer.
Resetting the SMC on portables with a battery you should not remove on your ownNote: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
You can find the full article here:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
If you are still having trouble with burning after that step, I recommend reviewing the section titled "Top troubleshooting tips" in the following article:
Disc Burning Quick Assist
http://support.apple.com/kb/HT1152
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

Can I copy and paste the oil paint filter from CC to CC 2014 in the corresponding folder? What else I need to do to make it works?

Can I copy and paste the oil paint filter from CC to CC 2014 in the corresponding folder? What else I need to do to make it works?

Sorry, but that's a no. Google Photoshop CC 2014 FAQ to find out why

I just upgraded from Mountain Lion to Maverick (10.9.3) and Adobe CC is listed as incompatible with this OS. What do I need to do to make it work again?

I just upgraded from Mountain Lion to Maverick (10.9.3) and Adobe CC is listed as incompatible with this OS. What do I need to do to make it work again? Just a patch/update or do I need to uninstall and install?

antoniobesteban wrote:
I just upgraded from Mountain Lion to Maverick (10.9.3) and Adobe CC is listed as incompatible with this OS.
Where are you seeing that information? Got a link?
According to the Adobe website: Mac OS X Mavericks (10.9) compatibility FAQs | CC, CS6, Acrobat
Plenty of people, including me, are currently running CC on Mavericks.

I can't find the pipet in the toolbox to pick a color from a picture. Where can I find it?

I can't find the pipet in the toolbox to pick a color from a picture. Where can I find it?

In InDesign CC 2014, the Color Theme tool has "top billing" and the Eyedropper tool is underneath it. In the US English version, pressing the letter "I" toggles between the two.

I don't know how it happened but my camera was deleted,i tried downloading it from app store but i can't find it there,i tried downloading other photography app but it didn't work for it says my device has no camera.how can i get my cam back?

i don't know how it happened but my camera was deleted,i tried downloading it from app store but i can't find it there,i tried downloading other photography app but it didn't work for it says my device has no camera.how can i get my cam back?

Default apps are part of the iOS and cannot be deleted. Search all home screens and all folders and/or search for it with Spotlight, that will tell you what folder it's in.
Also check Settings > General > Restrictions to see if it has been restricted.
If not found, Settings > General > Reset > Reset Home Screen Layout.

The last Apple I used was a IIe. Where can I find basic information about what an Ipad will do and how it differs from an Android tablet?

The last Apple I used was a IIe. Where can I find basic information about what an Ipad will do and how it differs from an Android tablet?
I am considering purchasing this for my wife who has only had experience with Windows machines.

Here are a number of possibilities:
http://ipad.about.com/od/iPad_Guide/a/How-To-Use-The-iPad-Best-Uses.htm
http://www.macobserver.com/tmo/article/8-important-things-you-can-do-with-an-ipa d
http://iconlibrary.iconshock.com/tutorials/50-things-you-can-and-cant-do-with-yo ur-new-ipad/
iPad vs Android:
http://ipad.about.com/od/ipad_competition/tp/iPad-vs-Android-Which-Tablet-Should -You-Buy.htm
http://www.cnet.com/topics/tablets/best-tablets/

Im syncing my iphone to itunes because i cant unlock the phone due to water damage so that i can take what is on it and put it on a new phone. how can i ensure that everything was taken from the phone and where can i find it in itunes?

my phone recently suffered water damage so that the screen does not reigster when i slide to unlock. I am sycing the data from the phone onto itunes so i can put it onto a new phone. How can i ensure that i took everything off of the old phone before i restore it and where can i find all of that stuff when i sync with the new phone?

iTunes will only store a back up of the iPhone and you find this by following the steps below:
Windows
Edit>Preferences>Devices
Mac
iTunes>Preferences>Devices
The link below can show you what is stored in an iTunes back up:
iTunes: About iOS backups

Sccm 2012 Only two actions on cleints actions can not find any errors

We have deployed sccm 2012 sp1 with cu2
everything was working ok then it all suddenly it stopped working for new client's . The client installs ok but there are only two action in on the client actions. Clients find the site code ok and logs look ok as far as we can tell
We did move are dns from windows hosted dns to a third part appliance around the same time but all cleitns still have vlid dns entries . the managmeopt point is still in the underscore records in dns
we have checked ClientLocation.log, LocationServices.log, ClientIDManagerStartup.log and ccmexec.log and there are no errors we can see.
the sccm console reports all services as green
We are running with PKi all certs are still valid and new clients are still receiving valid certficates
any ideas or pointers?
Rick Cross

Hi we fixed this this in the end by this incase its any help to any one else
look in the MP_Policy.log on the site server
see if you have any these errors
Detected at least one row in the result set from PolicyAssignment table which does not have a Signature, rejecting all rows.
if so connect to the sql server and run this sql
run this check
SELECT * FROM ResPolicyMap WHERE machineid = 0 and PADBID IN (SELECT PADBID FROM PolicyAssignment WHERE BodyHash IS NULL)
if any errors found run this
To delete:
Delete FROM ResPolicyMap WHERE machineid = 0 and PADBID IN (SELECT PADBID FROM PolicyAssignment WHERE BodyHash IS NULL)
then rerun check
as per this
http://social.technet.microsoft.com/Forums/en-US/cfbfdc2a-81b7-4b69-948b-361f5d66515e/sudden-issue-with-client-communications-in-sccm-2012?forum=configmanagerosd
Rick Cross

I need to upgrade my MacBook Pro from 10.5.8 - where can I find Snow Leopard?

I just upgraded my iPhone to os6 and now can't get into iTunes. Can't upgrade iTunes because I'm still on 10.5.8. Looks like I need to upgrade to Snow Leopard, then to Lion before I can buy Mountain Lion. I can't seem to find Snow Leopard avaiable for purchase. Can anyone help?

Upgrading to Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
If you need to purchase Snow Leopard contact Customer Service: Contacting Apple for support and service. The price is $29.00 plus tax. You will receive physical media - DVD - by mail.
Third-party sources for Snow Leopard are:
Snow Leopard from Amazon.com
Snow Leopard from eBay
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.
If you need to purchase Lion contact Customer Service: Contacting Apple for support and service. The cost is $19.99 (as it was before) plus tax. It's a download.
Be sure your computer meets the minimum requirements:
Apple - OS X Mountain Lion - Read the technical specifications.
Macs that can be upgraded to OS X Mountain Lion
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
Are my applications compatible?
See App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS.
For a complete How-To introduction from Apple see Apple - Upgrade your Mac to OS X Mountain Lion.

HT4623 I don't have software update in my iPad 2 under the setting, where can I find this?

I want to be able to update latest iOS but I don't have the software update section under the setting, what do I need to do?

The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
http://support.apple.com/kb/ht1848

My mail will not open or close when aim done using it? Is there any update i need to do to make this work properly??

If some can help me?? My mac mail will not close when iam finished with it, or will it open when i awake my computer is there an update i need to do??

As the message comes from AVG yo will need to read about AVG to stop those alerts.
If you think there is a genuine problem with firefox
* see [[high memory usage]] <-- clickable link -- <br/> that contains some tips and information about memory usage
* go to ''about:memory'' by keying that into the location bar <br/> the report that is generated may be of help - it gives tooltip info on mouseover of items, and has a button that tries to reduce memory usage

I have a HP Laserjet P1102w printer hooked up to the USB port of my Airport Extreme. I'm able to print to the printer wirelessly from my MacBook Pro. My iPad (2nd gen) can't find the printer. What do I need to do?

My iPad is on the same network as the Airport Extreme. The HP printer is on the list of Airprint printers but I'm not using it as a wireless printer, per se, as it's hooked up to the USB port on the Airport Extreme.
I installed the HP ePrint app on my iPad. Unfortunately, the app could not find the printer either.
As mentioned earlier, I'm able to print wirelessly to the HP printer via my MacBook Pro.

ApplePearApple wrote:
Since I'm able to print to the HP printer from my MacBook Pro using this configuration, shouldn't I be able to print to the printer from my iPad, especially when all of the devices are on/using the same network?
Not necessarily. AirPrint uses a protocol separate from the communication protocol used for the Extreme's USB port. The HP printer may disable AirPrint when its USB port connected to a valid device, which is my reason for recommending you use it wirelessly.
From AirPrint Basics:
AirPrint printers connected using Bluetooth or shared through a USB port of a Mac, PC, AirPort Base Station, or Time Capsule are not supported.
AirPrint printers connected by Ethernet are supported in OS X.
You may get more competent assistance from HP. See this HP support forum topic: iPhone & iPad can't Airprint to p1102w LaserJet
HP's Mac support has always been miserable though. I have been much happier since I abandoned HP and started buying Brother printers. They just work.

I had a UPROMISE savings toolbar installed. Since I updated my Firefox my toolbar is missing. Where can I find my toolbar to put it back up? My google toolbar is also gone.

My toolbars are missing since my update.
Upromise toolbar
google toolbar
Both are missing

There is nothing wrong with the OS update.
Delete ALL your email accounts.
Restart Playbook
Put the accounts back and ensure they are all set with PUSH ON. Manual (push off) will burn battery.
Similarly delete your wifi connections and add back when required.
Turn off wifi is not connected to wifi.
Any "hunting for connection" in email or wifi will burn up battery.

HT2237 I am trying to delete unwanted files from an external drive and am getting error code -50. What do I need to do to clear this and delete the files?

Can someone tell me how to clear this error. I am trying to delete unwanted files from an external drive and get error code -50. How do I clear this so I can delete these files? Thanks.

Re: Error Code-50 when trying to copy or delete files on external hard drive

I updated SCCM 2012 R2 from CU3 to CU4. Where can I find good directions on what else I need to do to make this work?

Similar Messages

Maybe you are looking for