I updated the Epson printer on my iMac OS X Yosemite 10.10.1 and my generic ink cartridge does not work.
On my iMac OS X Yosemite 10.10.1 I updated for my Epson Stylus NX420 and my generic ink cartridges no longer work. Can I delete the update?
Can I delete the update?
You might be able to revert back to the drivers you have before you upgraded if you have a backup of your hard drive made just prior to the update. But I'd try the Reset Printing System first.
If you do have a suitable backup go to the HD/LIbrary/Printers folder
and copy the EPSON folder to your Desktop.
Find the same folder on your boot drive and replace it with the one from the backup.
Also go to the backup's Users/Home/Library/Printers folder and copy the Epson app for your printer to the same folder on the boot drive.
I have an Epson R280 printer.
Finally reboot, repair disk permissions and try again.
The above is what I had to do when I upgraded to Yosemite.
Similar Messages
-
I updated the epson printer drivers like it asked, only to find out that my epson 1400 is not compatible on 10.8, the original driver worked fine, but now it prints terrible, how do I re-install back to original?
Do you have a TM backup or a clone? If so, erase the drive and restore with TM or clone back.
If not you'll have to reformat and re-install the OS that shipped with your Mac. If it shipped with Lion or ML you can do the restore from your Recovery Volume
EDIT: I assume you are saying that you just installed 10.8? -
Updated to IOS 7.1 and now my "Call Waiting" does not work, nor will the "Call Waiting" indicator stay on..... Any help?
Settings > General > Reset > Reset Network Settings
-
Updated my iPhone to new iOS6 and my Memory Loader app does not work! Is there a fix for the problem as it seems I am not the only one coming across this issue?
Other than what you have already done, you should clear the cache from your browser and, if you use it, your Facebook app. Also, deleting old texts can free up some room.
-
HT204210 Updated to Yosemite 10.10.2 and now my Photoshop CS5 is not working. What can iI do?
Updated to Yosemite 10.10.2 and now my Photoshop CS5 is not working. What can iI do?
Install the After Effects CS6 (11.0.4) update:
http://adobe.ly/DVA_updates -
I updated to 6.1.3 on my iPaad 1, and now my app store does not work. What should I do?
I updated to 6.1.3 on my iPad 1, and now my app store does not work. What should I do?
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
Cheers, Tom -
My daughter down loaded the new 6.0 software and now her home button does not work. Tried reseting to original settings and reset the operating software. Any ideas?
Try:
fix for Home button
Fix a broken, unresponsive or sticky iPhone Home Button
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out. I looked at system settings on trackpad and it is set, but does not work How do I get it started?
This is really unfortunate. I'm sorry that nothing works. I was going to mention holding down the power button and doing a force shutdown but you already did that. You might need to take it into the Apple store. I don't know if booting into safe mode would help. You would have to turn off the machine again, hit the start button and hold down the shift key after you hear the tone, but normally you would let go of the shift key when you see the apple logo and spining wheel. Maybe by holding down the shift key after you here the tone will cause the screen to come back on? The other option is to start up from the 'install disk' if your machine came with one. You would insert the disk, then shut down the computer, and hold down the C key right after hitting the start button.
Here's the link for the safeboot
http://support.apple.com/kb/HT1564?viewlocale=nl_nl -
Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
I downloaded ios7 to my iphone and now my volume control does not work 99% of the time. Is there something I need to do to correct this?
Adjust the Volume Control in Control Center, or try a RESET.............
-
i tried speeding up the beats per minute on of a few song on i-tunes following your instruction but it does not work. is there anything else that i should do?
You need to edit the audio file of the song to speed a song up. If you have GarageBand '11 on your mac, try this:
SPEDING UP SONGS -
Video Download Helper does not work after most recent update. I have cleared cache and cookies, uninstalled both Firefox and the helper,that has not corrected.When Firefox does an update are the "vendors notified so they can see if their product needs changes in order to be compatible? This may sound like a stupid ?, but it makes sense tome. Telling me to download something else, in my eyes is not REALLY solving the problem.
Don't uninstall 36. Just download and install 35 over top and you don't lose any data. I already did and everything works just fine. But I did remove VDH first.
-
i updated firefox to the newest version,now my login and home button does not work,also my refresh button dissapeared. I play alot of games and need those buttons to switch back and forth to other games. THANKS
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us! -
The 3 and 4 finger trackpad control does not work
After the installation of OS 10.7, everything work well since this week. The 3 & 4 finger control does not work now. I reboot my iMac and chek the Preference of the trackpad.
What I have to do ?Adjust the Volume Control in Control Center, or try a RESET.............
-
Selection in the Generic Data Source does not work
Hi gurus,
I have some problem with the selection in the Generic Data Source.
I have created a view as a base of a Generic Data Source.
This view is based on several table; i.e.: VBUK-VBELN (Sales Order number), VBAP-ERDAT (creation date of Sales Order), VBAP-POSNR (Sales order item), VBAK-BSTNK (Customer Purchase order number).
In the view, some join conditions have been defined: VBUK-VBELN = VBAK-VBELN, VBUK-VBLN = VBAP-VBELN.
I want to extract the Sales Order number, Sales order item and Customer Purchase order number for the Sales order created on the previous year.
On the Generic Data Source, I select VBELN (Sales order number) and ERDAT (creation date of sales order) as selection.
However, when I run the extractor checker (RSA3) on this Generic Data Source, the selection does not work at all, i.e.:
eventhough I restricted the Sales order number and/or the creation date of sales order, the generic data source ignores the selection criteria and extract ALL data.
Does anyone ever have similar problem? Did I miss some step in the Generic DAta Source creation? How to fix this problem?
Thanks a lot in advance.
Best regards,
FenHi Fen,
Just check what is the output you get for the same selection for the view you created.
Bye
Dinesh
Maybe you are looking for
-
I just installed Firefox last night. I use windows 8. When moving the cursor there is a lag time between when I move it & when it actually moves causing me to over and under the item I am clicking. It's a farm type game, so nothing rapid or radical i
-
ALV heading should change based on the input
Hi Experts, how to change the column heading in my ALV report with respect to the input fields.....based on my inputs the column's heading should change.... also , I need to display the values fetched from dbtab as heading in my ALV o/p. Please advic
-
How to link a webi report from crystal report
Hello everyone, I am trying to link a webi report from crystal XI. In my crosstab, the data is divided grouped by periods. So for every country it shows data along a period of time. The details for the value of the crosstab are
-
Weblogic timer and ClassCastExcetion
Hi, I have very strange problem. I have weblogic timer and when it's time to start the weblogic start's bean and all goes fine till get "home object" from another WLS where I get ClassCastException. Whot is funny if the same bean is started by stand
-
I downloaded an audiobook but it didn't let me finish downloading it and it has taken my money but every time I try to download the audiobook, it says the item is unavailable now.