I updated to 7.1.1 now my phone constantly freezing and lagging.
Anyone else having same issue with 7.1.1 update?
I have talked to mulitple people about this. My iPhone 5c is having the same software issues. I have talked to people at apple now twice and they know off the issue with the 7.1.1 and are hopefully going to fix it soon. They told me to factory reset my phone and I told them that i was not updating my phone until the problem was fixed. My phone actually just restarted its self about 10 minutes ago and im tired of it. Its all software issues.
Similar Messages
-
Rcvd upgrade 3.26 last night, now phone constantly freezes and all contacts lost
rcvd my upgrade to 3.26 last night, now my phone constantly freezes and all my contacts are gone.
Any solution out there? (unfortunately I did not have backup assistant turned on)
tia,
oldbuckoldbuck wrote:
rcvd my upgrade to 3.26 last night, now my phone constantly freezes and all my contacts are gone.
Any solution out there? (unfortunately I did not have backup assistant turned on)
tia,
oldbuck
Thanks for posting oldbuck!
Glad to hear you were able to resolve the freezing issue on your DROID Incredible! I would be happy to see if we can restore your contacts.
I know you mentioned you didn't have an active Backup Assistant account at the time of the update, however, did you have a Google account setup on your device prior to the update? If so, check on www.gmail.com to see if your contacts are backed up in the "Contacts" section. If they are you can just readd the Google account to your device and enable the "Sync Contacts", and all of your contacts will be synced back to your device.
I trust I have answered your question, and have addressed your concerns. -
I have just updated my iPhone4s to ios6 but now my phone keeps freezing and my apps freeze and close why is this
try a reset hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
-
I tried to down load photos to my computer, but accedently click update setting as well. Now the phone is frosen and the computer shows that I have to restore the phone, in this case I will loss all the photos. right? what should I do?
Follow this very helpful user tip by wjosten:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive -
I have had my Droid Turbo for less than a month. This morning I downloaded and installed the upgrade for Advanced Calling. Now my phone has basically quit working. The phone keeps freezing and/or automatically restarting. Why and how do I fix it?
Unless I am wrong, ErinW_VZW, the upgrade for advanced calling is NOT an app - it is a system update and therefore cannot be uninstalled. Kinda scary that you do not know this.
LLATOO - My advice to you is to perform a factory reset. Look under System Settings -> Backup and Reset -> Factory Data Reset. This will obviously delete your entire phone so backup what you need. -
Wifi keeps scanning and dropping even after connected to home network. Never had this issue until the update, and now my phone runs slow and terrible. Horrible update!! Any ideas on a fix?
It's important that you have a steady WiFi connection, ZealousEdge. What phone do you have? Is your phone unable to connect to any WiFi network? If you can, please try deleting the saved WiFi network and re-adding it.
AndreaS_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!! -
Downloaded IOS update and now my phone is dead and won't come on.
Downloaded IOS update and now my phone is dead and won't come on. Any suggestions?
Now I have the phone on and I can see the screen (held down the power and home buttons), but "slide" won't work so I can use the phone.
-
I did the 5.1.1 update over wifi, had update issues, then updated on Itunes no problem, now my phone continues to freeze and restart, any suggestions on how to correct this - thank you
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Has any of this been tried?
-
I have a 3GS and updated by mistake to IOS6, now my phone keeps restarting but doesn't do a thing. It says update completed and I only have few more steps. It connects to Itunes and restart again before I can do anything. Any solutions?
ThanksTry:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
HT1222 allowed new ios settings update and now my phone has crashed and cannote restore on itunes
allowed new setting update on iphone 4 s for ios 7 but now my phone has crashed and i cannot restore on itunes
Hi Ozergang,
Thanks for visiting Apple Support Communities.
If your iPhone is unresponsive after updating and can't be restored, you may find the troubleshooting steps in these links helpful:
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Best Regards,
Jeremy -
I updated my iPhone 4 software now it's turninng off and off and keeps repeating . HELP!
updated my iPhone 4 software now it's turninng off and off and keeps repeating . HELP!
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
-
My phone keeps freezing and I have the 5s and now it won't turn on but I can talk to sir
My phone keeps freezing and I have the 5s and now it won't turn on but I can talk to sir
If you can talk to Siri, but the screen is not turning on, try the 2 button reset. Press and hold the Sleep/Wake (Power) Button and the Home Button at the same time for at least 10 seconds. http://support.apple.com/kb/ht1430
If that doesn't make you screen come back on, you can try restoring your iPhone. http://support.apple.com/kb/ht1414
iPhone hardware troubleshooting - http://support.apple.com/kb/ts2802
Display has no backlight or dark screen
Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
Try turning iPhone off and then on again.
While connected to the iPhone charger, try to reset the iPhone.
If the low-battery screen appears, charge the iPhone.
My issue is still not resolved. What do I do next?
Contact Apple Support. https://support.apple.com/kb/HE57 or https://selfsolve.apple.com -
I have the iPhone 4S. Since I updated to the iOS 6 my phone keeps freezing and the apps crash all the time. Sometimes it freezes up to a minute. And there's no way of fixing that. Is apple going to fix this? I'm not the only one having this problem.
You cannot update iPhone 4 to IOS 8.1.2, the highest you can update is IOS 7.1.2.
Unless you've iPhone 4S (looks similar to iPhone 4) -
I have the iPhone 4, recently installed ios6 now my phone constantly turns itself off, keeps freezing and then 2 or 3 times in the space of 24hrs it has to be restored to factory settings. This has gone on for over a week.
If all basic troubleshooting has been tried and a restore as new does not resolve, take it to Apple for evalation and possible replacement.
-
I downloaded the ios7 and now my phone keeps freezing why?
i downloaded the ios7 and now my phonw keeps freezing and powering off, why? how do i fix this?
see if this link helps http://support.apple.com/kb/HT1808
Maybe you are looking for
-
Messages in the OS logs of Oracle Solaris on SPARC (64-bit)
One of my Customer is getting following messages in the OS logs of the Oracle Solaris on SPARC (64-bit) machine. Feb 2 01:07:33 ndc-m9k-2-r1 Invalid ioctl opcode = 0x403 Feb 2 03:07:43 ndc-m9k-2-r1 scsi: [ID 243001 kern.warning] WARNING: /pseudo/fcp@
-
HR Master Transfer from PRD to Quality
Hi All, I have a issue in PRD for an employee in PRD. Hence to analyse and test the same, I need to transfer/clone all his HR master data of same employee from PRD to QUality. Is there anyway I can achieve this?????
-
Possible to rename DC in DTR?
Hi, Is it possible to rename an already created Web Dynpro DC which is created in DTR? Thanks in advance! Robin
-
Error Code 16 during application launch.
We are facing weird issue with Adobe Creative Cloud software(s) during launch. Below are their details: 1. Error Code 16 if we try to launch any Adobe licensed software (Dreamweaver, Illustrator, Photoshop). Tried to solve the error using the informa
-
Cisco 3850 SSO and NSF failover time
Dear Member, I m trying to setup a network with few second fail-over with Cisco 3850 stack, C3850 support SSO and NSF on OSPF. However, when the Master fails, Slave take up the role and re-learn routing information and around 10 sec to fail-over. May