I updated to final cut X, 10.2 and now my video clips dont show in my project

Recently just updated final cut to the newer latest version and now when i open my project the video clips look like they are missing or wont play but audio from the same videos plays.  I reveal video in finder and try and play them and they wont play in quick time either it trys to convert them and then fails.  They are .mov files.  Anyone experience this?

Tom Wolsky wrote:
What are the media specs? Where did it come from?
Resolving Black Frames Issues with Panasonic AVCHD and Final Cut Pro X 10.2 - Apple Support
Hi Tom,
The link says, you may have black frames if:
"You're working with Panasonic AVCHD video files from an AVCCAM device recorded at 25p or 30p."
Can I know what id AVCCAM ?
I record a lot using Panasonic GH4 in 4K and Panasonic GX7 which is AVCHD.
Is my following assumption correct :
Assumption 1:
Panasonic GH4 would not be a problem bcos it records in 4K
Assumption 2:
My AVCHD from Panasonic GX7 wold not be a problem because all these while it ingest without problem. (NB: I dunno whether my GX7 records in AVCCAM)
Thanks

Similar Messages

  • I have been using final cut express for years and now want to switch to final cut studio 3. do I have to remove final cut express before installing final cut studio 3 or can I have them both installed at the same time on one computer?

    I am using a macpro 12 core computer
    I have been using final cut express for years and now want to switch to final cut studio 3. do I have to remove final cut express before installing final cut studio 3 or can I have them both installed at the same time on one computer?

    You can have them both on the same computer as I and many others have done for years.
    Just go ahead and install FCS 3 normally.
    There will be absolutely no problems.

  • Final cut Express HD sound splits when adding video clips

    this have been happening recently. I set up my music and start add video and photos. Im new to FCE. Anway now when I add a clip the music bar splits seperating to the width of the clip.
    Whats causeing this and what is the fix.
    thank you

    Hi
    A. I don't know
    B. BUT it happens to me to and my strategy is
    - to add new material beyond the end of all material in TimeLine
    - then move it into place.
    This also happens to me when adding Video to another track ==> all splits - but by first add it beyond the end and move it into place always works.
    But to be able to put it (Video, Photos and Audio) into right place directly would have been great.
    Yours Bengt W

  • Updated to OSX Maverick and now I can't stream shows from DirectTV.

    I recently updated my macbook pro to OSX Maverick and now I can't stream shows from DirectTV.

    copied from DirectTV, so look like have to wait then.
    DirectTV wrote:
    Macintosh computer running Mac OS X 10.6.x (Snow Leopard), Mac OS X 10.7.x (Lion), or Mac OS X 10.8.x (Mountain Lion) with any of the web browsers below:
    Firefox 13 or above
    Safari 5 or above
    Safari 5 or above

  • Updating Final Cut Studio 2.01 and workflow between FCP and AE

    Hi. I am currently working in FCE 3.5 and am considering purchasing Final Cut Studio 2.01 (new and sealed) as opposed to the latest version since I am running a PowerPC G5. Am I assured of being able to download all the updates for Final Cut Pro 6 and exactly which version would be the latest and final one? Was there ever an FCP v6.5? I do mainly animation/motion graphics and work in After Effects (along w/ Flash, Carrara, Photoshop, Illustrator, etc.). I understand that the workflow between FCP (as opposed to FCE) and AE is greatly enhanced. Can someone give me an idea of what advantages this new workflow will offer in terms of what I'll be able to accomplish that I can't do now w/ FCE? Also, any other comments on how FCP (as compared to FCE) will benefit me as an animator will be greatly appreciated. Lastly, am I correct in assuming that I will be able to open my FCE 3.5 project files in FCP 6 but not visa versa? Thanks. Jack.

    Thanks for the replies everyone. I see that I will need some 3rd-party support in order to realize the benefit of a Final Cut Pro/After Effects workflow. Have another question. What are the kinds of filters that you can keyframe in FCP but not in FCE? And are there many filters in FCP that are not included w/ FCE? As I deal mainly w/ animation as opposed to footage of live video I am trying to justify the investment in Final Cut Studio 2 in terms of it being a benefit to me as an animator. I currently use FCE 3.5 (which includes versions of SoundTrack and LiveType) and After Effects CS3 plus other graphics programs. I would love to be able to work within DVD Studio Pro as iDVD is so limiting as an authoring program but am not sure how much I will benefit from switching from FCE to FCP. This is what I am trying to nail down.

  • After installing some updates on final cut pro 7 is asking me to enter my first and last names plus serial number which i dont have. how do i go about this?

    After intalling some updates for Final cut, I m asked to put my first and last names and serial number which unfortunatelt i do not have. how do i go about this?

    To add to what BenB advised, make sure you have proof of purchase when you call Apple for a replacement serial number.
    For future reference, it is a good idea to keep all software serial numbers in a database or text document.  Considering the cost of the software, keeping a list of serial numbers can come in very handy at times like this.
    -DH

  • HT1338 i want update for final cut server 1.0 ????????

    hello .
    i want to update my final cut server 1.0 i didn't find it are you reset it steve jobs don't do that for us

    The update to 6.0.5 (6.0.4 is not available from apple any longer) is included in a Pro Apps update or something titled along those lines. It is not named "FCP update".
    It can be found here:
    http://support.apple.com/downloads/ProApps_Updates_2008005
    x

  • After shirring Blu-ray does not want to read disk. If it's setting, how to setting correctly. This happened after update.  Final Cut Pro X 10.1.1

    After shirring Blu-ray does not want to read disk. If it's setting, how to setting correctly.
    This happened after update.
    Final Cut Pro X 10.1.1 & Mac Pro 10.9.2

    Just refuse to open.
    Player show me first page (background) & refuse to open.
    Thanks. Greg.

  • Can't Update Old Final Cut Pro Projects

    I use Final Cut Pro for work and just recently updated. I didn't realize that I needed to have all my projects in my "Final Cut Pro Projects" file while updating. I had a lot of my projects in a "Final Cut Pro Projects-Not In Use" file when I updated my Final Cut Pro and now those projects will not update. I didn't have a "Final Cut Pro Projects" file after updating so I created a new one under "Movies" in my Finder and added all the projects to that and Final Cut Pro still won't update them. What am I doing wrong?
    Also, now that I've updated the projects are exporting as .MP4s and my boss wants them as .MOVs again. Is there a way I can change them to that?

    I have been trying to add a screen shot to this reply for the past ten minutes but I keep getting "An error occurred while trying to submit your post. Please try again" So I will try to explain it to you.
    I click the arow on the bottom right hand corner. Then click "Master File..."
    My settings are:
    Format: Computer
    Video codec: H.264 Better Quality
    Resolution: 1920 x 1080
    Audio file format: QuickTime Movie (AAC)
    (don't click Include chapter markers)
    Open with: QuicTime Player (default)
    On the bottom it reads left to right:
    1920 x 1080 | 23.98 fbs   Stereo (L R) | 48 kHz  00:00:04:02   MPEG-4 movie 10.4 MB est.
    Then I click "Next..." and save it to my Desktop and click "Save"
    I hope that makes sence! Sorry the screen shots didn't work!

  • HT6114 I want to re-install Aperture and make updates to Final Cut Pro on my MAC ?

    I want to re-install Aperture and to update my Final Cut Pro software, but when I go to install or update I get an error message saying I need to install the latest version of MAC OS X 10.9.  I currently have version 10.7.5 installed but when I go to do a software update it tells me that my OS X software is up to date.
    What do I need to do to fix this problem?

    Download Mavericks via the App Store.

  • I have recently update my Final Cut Pro X to Final Cut Pro X 10.1. I downloaded the update from the app store. Now every time I open Final Cut it crashes almost instantly. What can I do

    I have recently update my Final Cut Pro X to Final Cut Pro X 10.1. I downloaded the update from the app store. Now every time I open Final Cut it crashes almost instantly. What can I do?- I really need help!

    It sounds as though you have a corrupt project - or possibly a file within an event that is causing the application to crash.
    Quit FCP X, then move your projects and events (if you have any) to new folders so that FCP X doesn't find them, then relaunch the application. If it launches OK, there's a very good chance one of your projects or events is causing the problem.
    Quit the app again, then move one event or project at a time back to the original folder and launch FCP X again - keep going until you find the cause.
    Andy

  • The Apple Mac Store is re-downloading and reinstalling the update called "Final Cut Pro X Supplemental Content" literally everyday.

    My problem:  The Apple Mac Store is re-downloading and reinstalling the update called "Final Cut Pro X Supplemental Content" literally everyday.  I have a Mac Pro with Mavericks and Final Cut Pro X 10.1 installed.  It seems to complete the update to the best of my knowledge.  It shows it to be Final Cut Pro X Supplemental Content 1.0.  Is there a later version (a 2.0?)?  It seems it started when Mavericks updated.  Anyone else have this issue or know a solution to get it to update once and for all?

    hahah yeah i quit torrenting i have nothing but legit apps now.
    hope apple heard that!!!!
    your post fixed my issue
    but it did take more than deleting torrented apps, once your run a program with a MASReciept with someone elses Apple ID. that other ID is saved in all apps you got off of app store.
    You have to delete all apps that contain the MASReciept (the terminal command tells you which ones) then quit appstore then reboot download all apps again.
    it taught me to just buy my apps..

  • I have Final cut Express 4, can I update to Final cut pro if I pay, to make the update.

    I have Final cut Express 4, can I update to Final cut pro if I pay, to make the update.

    To Final Cut Pro X? You want it, you just buy it. No separate upgrade pricing.

  • Updating from Final Cut 5.1 to 5.1.4

    I am trying to update my Final Cut Pro version 5.1 to 5.1.4 because I keep getting General Error (41) cause the project was originally created in FCP version 5.1.4. I go to run the update Final Cut Pro 5.1.4 dmg and everything runs fine until it is time to click the install button. The install button is disabled therefore I can't update the software. Anyone know how to get that install button to become enabled?

    I used to have that 'general error' warning in FCP 3 frequently. I'm not sure now of the solution, but perhaps trashing the prefs may help. Here's Ken Stone's sequence for doing that:
    http://www.lafcpug.org/Tutorials/basictrashprefs5.html

  • TS3262 how to i update the final cut studio 2 .in fcp 7 or other version

    how to i update the final cut studio 2 .in fcp 7 or other version tel me solution..

    FCPX is totally new version. NO upgrade from FCP Studio. Go to App Store and buy it. No other way.

Maybe you are looking for

  • Mail not working.. no error message

    Good day everyone! I have a problem since two days now. I have mail not updating email received and not sending email either. Tried the "Connection Doctor", and it says connections are ok. I have no problems to open and type a new message, but looks

  • How much ram can i upgrade my 2009 MacBook Pro running 2.26ghz

    i currently upgrade my MacBook Pro mid 2009 with 2x 4GHZ 1066 mhz ddr3 and keeps on quitting while I'm using it. why?

  • Short Date Validation Javascript

    For those of you who use the nls_date_format = MM/DD/YYYY date format and want the same functionality for validation as isDate found in 9iAS, here is a function that you can use. It works in WebDB 2.2 as well. It checks for a valid date, including le

  • Taking control back while calling stored procedure using java programme

    I have stored procedure to load data. This procedure is invoked by java program. The stored procedure take around 10 to 15 minutes to do complete loading of database. I want to write stored procedure when it starts loading of database at the same ret

  • I can't to disable a responder on Exchange Server 2013

    Hello; i have a problema with continuos restart of a Exchange Server 2013. Analizing the dumb the bugcheck was: 0x000000ef (0xffffe001c4228080, 0x0000000000000000, 0x0000000000000000, 0x0000000000000000). Investigating in this fórums and internet; i