I updated to the iSO6 and my phone now keeps crashing while saying, "Invalid SIM." What do I do?
I updated to the iSO6 and my phone now keeps crashing while saying, "Invalid SIM." What do I do?
Thank you very much! I actually tried doing that with a paper clip but was not successsful. I feel I tried plugging in the clip in in every possible way and it still did not work. Is there is a special trick to the way this needs to be done? I felt like if I kep pushing, I was going to damage the device.
Similar Messages
-
just bought a new iphone 4s 16gb my sim worked correctly after puting and old profile on the phone so I could get all the info now it says invalid sim what can I do o fix this?
I suspect unless he had some items in iCloud backup then they are gone. Connecting an iPhone to a different library from that to which it was previously connected will result in the device asking if you want to erase it.
-
I just purchased the I 4S and at least once a day, it will say Invalid Sim, what would cause this and how do I fix it?
Then, if there's any data on the drive that you want to keep, you have to back up before you do anything else -- assuming it's still possible.
Basically you have three options:
1. Install a copy of the Mac OS on an external hard drive, boot from it, and copy the data from the internal drive.
2. Start the problem Mac in FireWire target mode (command-T at startup) and connect it to a working Mac with a FireWire cable. The internal drive will mount as a FireWire device.
3. Remove the internal drive and mount in an external enclosure on another Mac.
Once you've backed up, follow the sequence in the support article linked below. The article is somewhat outdated. Where it refers to booting from an installation disc, you should boot from your recovery partition (if running Lion) by holding down the key combination command-R at the chime.
Mac OS X: Gray screen appears during startup -
HT1414 I have unlocked my phone but it says invalid sim what do I need to do?
I have unlocked my phone but it say invalid sim what can i do?
How did you get your phone unlocked? If you didn't get it officially unlocked, you'll get that error message.
-
Doesnot work through the computer
Cannot update through wifi
There is an error everytime it updated through the computerHello there, Adele102.
The following Knowledge Base article offers up some great steps for resolving the issue you're describing:
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
If the issue persists, then this article provides an extensive list of error messages and additional troubleshooting steps:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I am trying to add a footer and Adobe Pro XI keeps crashing
I am trying to add a footer to my document and Adobe Pro XI keeps crashing. Any ideas?
What is your Acrobat XI version? If less than 11.0.09 I suggest you update to that latest version.
Note that you posted in the forum for Acrobat.com online services; you may get better help if you ask in the Acrobat forum. You should also state your operating system. -
tried to update to the iso6 update i got and now my phone is frozen on the screen the says to plug in to itunes but my computer wont reognize it what do i do
Follow all the Steps here
http://support.apple.com/kb/HT1808 -
i have an iphone 4, i connect it to my laptop using the usb and then when connecting to itunes it says my phone is not up to date with itunes yet i cannot find an update 11.1 for my phones itunes? someone please help me.. kind regards
Itunes 11.1 is for your computer, not your iphone
It is required in order to sync with ios 7. -
I plugged my iphone in to my laptop to update it and the computer shut down right at the end. My phone now has the itunes symbol and an arrow asking me to plug my phone into itunes (I assume the laptop). It's frozen like that even when switched off. If I plug the connection into the laptop it's not recognising it now. HELP!
Hello there, xkatiex255.
The following Knowledge Base article should provide the steps for you to resolve your issue:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Hi, I have just tried to update the iPhone software and it appears to be updating but the screen on my phone has had the same picture of the apple and its at the same spot of loading (about 3 quarters) for the last HOUR!! help!
oh and the device is not being recognised by itunes now either.
-
Hi there
I ha
Hi there I have a iPhone 3G and it was with O2 but needed to go onto 3 network so someone on my local market unlocked it and the phone was working fine until I tried to update it through iTunes and it always now stops loading towards the end with an error is there a way to get the phone working again please.Shame you had the iPhone hacked as O2 usually unlock their customers iPhones happily.
We cannot discuss your problem as it is in breach of the Ts&Cs you agreed to on registering
However hint ....you have probably trashed it -
I have the iPhone 4S. Since I updated to the iOS 6 my phone keeps freezing and the apps crash all the time. Sometimes it freezes up to a minute. And there's no way of fixing that. Is apple going to fix this? I'm not the only one having this problem.
You cannot update iPhone 4 to IOS 8.1.2, the highest you can update is IOS 7.1.2.
Unless you've iPhone 4S (looks similar to iPhone 4) -
i just started the new update for my iphone and my phone is asking me to connect it to itunes but my computer isn't recognizing my phone being plugged in
Click here and buy the DVD.
(89921) -
i just updated my iphone to the latest update and my phone now has a picture of the connection cable with an arrow pointing to itunes. I plug it in and connect to itunes and nothing happens. HELP.
Hello JBH 1162
Check out the articles below to get your iPhone to show up in iTunes so it can be restored. Start with the first one to see if you can make any change to show up in iTunes and if it does not, then pick either the second or third article for the type of computer that you have.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Regards,
-Norm G. -
I just updated to 7.1 and my phone says no service. Plus none of my music restored.
Updates are meant to improve your device rngen. I am sorry to hear of the difficulites you are experiencing after you updated your device. So that we can troubleshoot correctly, can you please provide us with the model iPhone you have? After your phone completed the update, did you reset the network settings? To reset network settings click, settings>general>reset>reset network settings.
Thank You,
MichelleL_VZW
VZW Support
Follow us on Twitter @VZWSUPPORT
Maybe you are looking for
-
Not able to open Logic8 sessions after upgrade from 10.5.8 to 10.6.8
Hello, I recently upgraded my 2x2.93 GHz Quad-Core system from 10.5.8 to 10.6.8, and now i'm not able to open certain logic 8 sessions. Most of my sessions open fine, but theres a bunch that I'm getting memory errors for, saying things like "not enou
-
Accounting Doc. not cleared...
dear all, Once invoice has been done and released to accounting, we can see the status of INVOICE as completed in DOC. FLOW. After that iam getting the Accounting doc. as "not cleared" in the document flow. What it is actually referring about....as w
-
Re: Server Connect Error: 901 & 403 -
Have photosmart 5520 e copier. Have scanned one document some time ago. Tried to scan again using same procedure but each attempt stops after document loading with message : there was a problem connecting to the server. Have powered off printer and d
-
Hi, We are in the process of upgrading our code from C++ 4.2 to 5.4. and we can able to build binaries. When we run the executable, it crashes and generates 'core' file (Segment vialation). Below are the trace info from dbx debugger. can anyone know
-
External Manufacturer number field in vendor master (EMNFR)
Hello Experts I am trying to search for a field External manufacture number i.e EMFNR , I checked in OBD3 this field is maintained as a mandatory field I can see this field in LFA1 table But when I go to XK01,I can't see this field in cantrol tab