I updated to windows 7 on my hp pavilion dv6000. but my built in microphone dsnt work

the driver i have downloaded from hp page does not work.
error code is hardware cannot be recognize

Hi:
What audio card do you have?
Paul

Similar Messages

Built in Microphone not working - Windows 8 - Edge E430

Hey Guys,
My built in microphone was working correctly until a few days back. I made no updates or system setting changes. It's a ThinkPad Edge E430 with Windows 8. The required audio drivers are in place. I have also enabled the microphone from audio settings. Please refer image below.
Can some one guide me on what else I can do? Will be grateul as all my Skype calls are blocked becuase of this.
Thank you,
Hariharan.

Hi again, Hariharan
If you right-click on the first selection in the image (the microphone) and select Properties, you should be able to see the driver in formation on the Driver tab in the new window. Can you list the driver Provider, Date, and Version? Also, how long have you had the machine, and how long was the microphone working properly before this issue began?
Thanks in advance,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

I updated my mac mini to 10.8.1 but a website i use for work is not recongnizing the update in the internet. What do i need to do

I updated my mac mini to 10.8.1 but a website i use for work is not recongnizing the update in the internet. What do i need to do

Solution, update to 10.8.5
What website?
Have you talked to IT?

Why do I need a headset to talk on Skype? Doesn't my HP Pavilion dv6 have a built-in microphone?

I understand most laptops come with a built-in microphone so I'm having trouble identifying how to use it (if it exists) on my HP Pavilion dv6. It is cumbersome putting on a headset to chat on Skype all the time, and given the technology available, somewhat primitive. Anybody help?

CactusLander,
Welcome to the HP Forum!
Assuming your Audio setup is typical for Windows 7 or 8, and that (in general) your PC sound is in working order,
then the next place to look is in Skype.
Take a look at the following for "how to":
How do I adjust the sound settings on my computer and in Skype for Windows 7?
Start at the top and work down to and including the Section:
Checking your audio settings in Skype
Kind Regards,
Dragon-Fur

Built-in microphone not working (or extremely silent) under Windows XP

The built-in microphone works great on my iMac under OS X 10.6.
However, it does not seem to work under Windows XP, using BootCamp. Is there any way to fix it?

Hi again, Hariharan
If you right-click on the first selection in the image (the microphone) and select Properties, you should be able to see the driver in formation on the Driver tab in the new window. Can you list the driver Provider, Date, and Version? Also, how long have you had the machine, and how long was the microphone working properly before this issue began?
Thanks in advance,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

I took my Pavilion dv6000 apart and now the sound isnt working

So here is the situation...
My fan has been making noise so I wanted to clean out all the dust from inside my Pavilion dv6000. (But that isn't what i need help with right now.) So after I took it all apart and put it back together, I had this problem with turning the computer on. I think it had to do with this little ribbon cable that wasn't going in the spot where it had to be (it was connected to the power button chip.) I finally got that ribbon where it was suppose to be, and tried to turn it on. It still didnt start. The battery light would go on when it was plugged in, but nothing happened when I pushed the power button. I finally decided to give up and clean the finger prints off of it so I could bring it to my IT teacher tomorrow. While cleaning it, it all of a sudden turned on. I dont know what happened. It just turned on by itself. I mean, I could have pushed something while cleaning it, or maybe something was loose and tightened while i was cleaning it. But anyway, I finally got it to turn on. Now while doing homework, I notice the sound isnt working. I really dont want to take it apart if i dont have to becuase this is the last week of school and I need these practice tests that I put on my computer. I was wondering if there is anything I can do to possibly fix my audio without taking it apart. I was thinking if i check for the latest driver maybe that would help, but i have the latest driver and the sound still doesnt work. So does anyone know how I can fix this without taking it apart? If not does anyone know how I can fix it if i do take it apart? (for example, things to check to make sure they are connected or tightened?)
Thanks for your time and help, I really appreciate it.

Hi,
Check this document page 146 (speaker assembly).
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

I have just update my mac mini server to OX Yosemite, but now the iTunes is not working at all.

I have just updated my Mac Mini Server (Mid 2011) to OS Yosemite ver 10.10, after the update, iTunes is not working, and i have tried to reinstall iTunes over and over again but it was not successful , please advise if you have a solution or share similar problems. Thank you.

You have to upgrade to 10.6.8 to be able to download iTunes 10.7 or 11. The 10.6 Snow Leopard DVD is in the Apple online store. You can get it for $19.99. You will need to be running 10.6.8 to access the App Store to order Lion or Mountain Lion. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
First we need to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up check the Model Identifier and post it back here.
The Early 2006 model 1,1 Core Duo can only run a maximum of 10.6 Snow Leopard.
The models Late 2006 Core 2 Duos 2,1 through Early 2008 4,1 can only run a maximum of 10.7 Lion.
The Late 2008 model 5,1 Aluminum Unibody through the Mid 2010 White Unibody model 7,1 can run 10.8 Mountain Lion.

Windows 7 IE8 32bit Shockwave installs but can't get it to work.

I have tried many locations on this site to remedy this problem.
The player installs and passes the test of installlation, however when I go to say Yahoo games
it reinstalls, then installs additional compatibility items and craps out about 90%of the way and the program will not open properly. This is version 11.5.7.609. I have uninstalled and reinstalled at least 15 times. I have also downloaded the uninstaller from this web site, but no difference. Please can somebody help me on this issue? I have also checked and made the necessary corrections in the firewall. Still no good. Help!!!!

I hadn't
used the full installer previous to your respone. However upon seeing your response
I uninstalled Shockwave player and downloaded the full installer to my desktop.
Opened the installer and installed, opting out of the google tool bar as usual. Went to the following URL http://games.yahoo.com/daily-games/wordsense.
What happens is the site does not recognize the activeX control and immediately starts a down load of compatibility components. After which a window pops up asking if I wish to install the google tool bar as the previous download did. I select no and then a smaller install bar starts its job which makes it about 4/5ths the way across then opens the wordsense "downloading dictionary". Which it does for a few seconds and then blanks out and does not proceed.

F5 is not working after update of windows 8.

f5 is not working after update of windows 8 in my laptop. Rest of the function keys are working.
my laptop details are
Product Name: HP Pavilion 15-e008tu Notebook PC

Hello prem23,
What did the F5 key do before? According to your manual in the Action Keys list (page 32-33), that key wasn't tied to anything unless its just for page refresh.
If a Windows update breaks something, the best way I know to correct the problem is to uninstall that update.
OR
You can revert Windows back to an earlier state before the update with a Restore Point provided you didn't turn off that feature. If for some reason it is turned off, you will not be able to revert to that point as one was not created.
After the restore, only install one windows update at a time until you find the culprit and uninstall it. This way you have the other updates installed. YES this can be a long process.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03327545&cc=us&dlc=en&lc=en

Internal microphone stopped working today - Pavilion G7 - C2M31UA#ABA / Windows 8

Hey there
I am using Skype quite often, but today my internal microphone stopped working. I restarted Skype, my laptop and I also followed all steps of you trouble shooting page. No change ...
Any ideas?
Thanks
Bettina
This question was solved.
View Solution.

Enter your device manager.
Can be found by pressing windowskey + x.
Press Sound, video and game controllers.
And right click and remove the one called Realtek high definition (should be something like that).
Reboot the computer, this should make it reinstalll the driver på itself.
If this doesn't work, search for the program called recovery manager. In here you pick the one furthest to the left, called something with reinstall driver. Here you find the one called IDT High-Definition (HD) Audio Driver check it, and press install.
Since it used to work, and you dont have windows 8.1. If this still doesn't fix it, it must be some setting regarding your microphone. So try right clicking your speaker icon down in the right corner, when in desktop mode and pick recording units (translating directly from danish). Please let me know what you see in here.
Best regards
ThaCrash
Troubleshooting Steps:
1. Reinstall Adobe Reader.
2. Turn it off and on.
3. Press Kudos star.

Hp pavilion dv6000 coprocesor does not working .

My hp pavilion dv6000 coprocesor (windows7-64 bit) does not working.i need to install it but I cant find it, can u help me abut this regerd.
This question was solved.
View Solution.

Welcome to the HP Forum!
rajurasidh wrote:
My hp pavilion dv6000 coprocesor (windows7-64 bit) does not working.i need to install it but I cant find it, can u help me abut this regerd.
Please identify your notebook with the product name (p/n). It should be on the barcoded sticker on the bottom of your notebook or in the HP Support Assistant.
What you probably need is to install the chipset drivers. You can find them at the drivers & software download section of the HP web support portal for your notebook. Install the drivers that match your installed operating system.
Kind regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Windows Vista connects to TC/Airport, but not internet

I have long had a Windows Vista notebook (HP Pavilion dv6000) connect well via a Time Capsule to the internet, along with a PowerBook G4. I recently added an iMac (27" 3.06 dual core) and all was well for a few days, but then had to reset the Pavilion's setting and I can now connect it to the TC/Airport network, but not the internet (I get a "Local only" notation). I've confirmed correct network passwords, tried repair mechanisms, and no luck. Anyone else have this problem?

I too have this problem, I see that there is a solution solved notice at the top of the page, but I do not see the solution.

How do I use the built-in microphone on my iMac while using Windows XP?

My iMac has a built-in microphone. My computer is set up with a partition to run either mac or windows. I would like to use the built-in microphone feature when I am using Windows XP. Is there any way that I can do this?

Hi and welcome to Discussions,
assuming you have installed the neccessary BootCamp Drivers from the OSX Leopard DVD the internal mic is useable with any kind of recording software.
Windows itself has a rather rudimentary Audiorecorder program built-in.
For a more sophisticated recording program have a look at Audacity http://audacity.sourceforge.net/
Regards
Stefan

Pavilion g6 updated to windows 8.1 now tv won't display the screen

I cracked the screen of my HP Pavilion g6, so I usually connect it through HDMI to my Coby TV and it usually worked fine. Now, after updating to Windows 8.1, my TV won't display anything. I believe it is because the screen is black, and my TV never displayed a black screen before, it only showed the screen once the laptop has started up. I've tried pressing f4 and i can see that the screen is blue in the small area of my screen that still works, but it still isn't showing through my TV so I don't know how I can fix this problem because I cannot see the screen. Please help!

Hi ke11ie,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that after upgrading to Windows 8.1 your external display(CobyTV) is not working. Just to rule out the TV if you connect to a different display does it work?
Here is a link to Connecting a Monitor, Projector or TV (Windows 8).
Here is a link to Display Quality Issues, that may also be of aid.
I hope this helps.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Brighness issue after updation on Window 8.1

I have HP Pavillion g6 1202-tx Notebook PC, recently updated to Windows 8.1. Since then i am not able to adjust my screen. It's really ridiculous. I have tried to google it, but can't find any solution. Plz any body can help urgently.

Hi sonu4486,
Welcome to the HP Support Forums!
I see that you are having some trouble with brightness on your display after upgrading to Windows 8.1. One thing I am unclear on, is whether your issue is only with brightness of the display, or if there is also some other trouble you are having with the display as well. For now I will proceed with the brightness issue you mention.
Here are some HP documents I found that may be helpful related to brightness issues:
Resolving Problems with the Brightness of the Display
Display is Dim During or After Startup or Boot
Here are some other HP sources I found that may also be helpful to you.
Resolving Problems with Notebook Displays (Windows 7 and Windows 8)
Diagnosing a Liquid Crystal Display (LCD) for Damage
This page is more informational about displays, for your reference.
About LCD Panel Defects and Terminology for HP Pavilion or Compaq Presario Notebook PCs
Also for your convenience here is the support page for the: HP Pavilion g6-1202tx Notebook PC
Please let me know if you need any further assistance.
Regards,
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

I updated to windows 7 on my hp pavilion dv6000. but my built in microphone dsnt work

Similar Messages

Maybe you are looking for