I updated to Yosemite and now Iphoto says it's incompatable. Downloaded the new version 3 times now and still get the same message. Restarted Macbook twice and still same problem
I updated my Macbook Pro to Yosemite this morning, (it took almost 2 hours!), and now iPhoto tells me it's incompatable with Yosemite and I need to download the latest version. I've done that 3 times now and restarted twice, (just in case) and I still get the same message, incompatable...download the latest version of iPhoto.
Frustrating as ****!
The "latest" version is a bit ambiguous. The App Store may be only showing you the latest version you bought, not the most recent version.
Which version did you download?
You need to install iPhoto 9.6 and launch this version. If you previously have been running a version of iPhoto 8.x.x., you cannot update, but need to buy the upgrade to iPhoto 9.6 from the "Featured" tab of the App Store..
Then launch iPhoto from the Applications folder. The Dock icon may still be tied to the older version.
Also, depending on the version you upgraded from, you may need to run the iPhoto Library Upgrader, if your iPhoto Library has been created by iPhoto 7.1.2 or earlier, see this link: iPhoto '11: About the Library Upgrader
Similar Messages
-
I have recently updated the new apps via creative cloud now photoshop and bridge no longer work, they open then say they have encountered a problem and close, I also tried opening the old version of photo shop but getting the same result
What OS version? What's the exact error? Exactly when does the error occur? What previous versions? What is on the screen when the error displays? Does Photoshop get fully open?
Try opening Photoshop holding down Shift key immediately to turn off plug-ins. Lots of good suggestions here: Photoshop: Basic Troubleshooting steps to fix most issues -
unable to update to ios 5 on windows 7. please can someone help me i have tried everything? i deleted itunes and downloaded the new version when i plug my iphone 4 in it does a back and then I then everything runs normal and it extracts and then i get an error code at the end 3197. had the iphone for two months and its new.
Please can somene help me, i am currently on version 4.3.3 (8J2)
Modem Firmware 04.10.01followed someones instructions and it has worked ios 5 is now working on my iphone 4
-
My facebook app went dark and had the word "waiting" below it and I can not delete so I downloaded a new facebook app which is ok but the old app is still there but now the word "waiting" is gone and still cannot delete.
This is my boilerplate respone for the "waiting apps" problem. Give these suggestions a try in order.
1. Tap the "waiting" icon and see if you can pause it. If it does pause, then tap it again and see if it will resume. If that works, repeat the same steps for each "waiting" icon.
2. Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
3. Make sure that you do not have a stalled download in iTunes - if you have a download in there that did not finish, complete that one first.
4. If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
5. You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again. Apps may also be able to be deleted in Settings>General>Usage>Storage if you cannot get the X to pop up on the icon.
6. You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered.
7. If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad. -
Hi. I was trying to update my Itunes to the newer version but now when I try to install it, it comes up with Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services. How do I fix this?
Hi LyfsGD!
Here is an article that can help you troubleshoot this issue with the Apple Mobile Device Service:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/ts1567
Thanks for using the Apple Support Communities!
Cheers,
Braden -
I am on a shared computer with several profiles. I had to delete my profile and create a new one. Now, my question. It transferred to Purchased Items to the new iTunes, so how do I get the rest of the songs to transfer to new iTunes?
It sounds like you might have broken links to your content. Either repair these by putting the files you've recovered where iTunes expects to find them or delete the broken entries then go to iTunes Store > Purchased > Music > Not on This Computer, and click the download links.
If you have an Apple device see also Recover your iTunes library from your iPod or iOS device.
tt2 -
I've got a MacBook Pro 1TB HD, the drive was damaged (probably dropped) after I formatted the new drive I was able to get the OSi onto the drive and it's now up and running..But prior to removing the old HD I was able to run CloneZilla to map the drive. The problem I'm having is getting the files and documents back on the new HD.
I created a folder on the desk top and moved all the files and docs onto it, ( files / docs was originally burnt on a DVD ). I'm not sure A) how to open the specific files B) which files to extract C) Is it as simple as drag and drop...
Hope you're able to understand my problem and offer some suggestions, in advance thank you for your time and effort...Hi, Steve -
Yes, the CD-ROM drive must be jumpered as Master in order for it to be bootable.
Your G4 (PCI) should have two built-in IDE buses - one is usually assigned to the CD-ROM and Zip drives, and the other is used for hard drives. If you have the hard drive connected to the same bus as the one the CD-ROM is on, try switching the hard drive to the other bus.
Set the hard drive's jumpers as Master.
Exception - if the hard drive is a Western Digital, it may have a third position, Single, which must be used when the drive is the only device on the bus.
Note - Cable Select jumper settings will not work on a G4 (PCI).
Edit - -
Startup Manager, which is what booting with Option held down invokes, is not available on a G4 (PCI).
Article #106178 - Startup Manager: How to Select a Startup Volume
Firewire Target Disk Mode is limited on a G4 (PCI) - it can be the Host machine, but not the Target machine.
Article #58583 - Firewire Target Disk Mode
Relatedly, a G4 (PCI) can not boot to firewire drives, although it can use them for storage.
Article #58606 - FireWire Booting -
I tried to download a tv show off iTunes on my iPad and it keeps saying I can't download it at this time. But I've paid for it already, how can I fix it?
Try to sign out of iTunes and sign back in, that usually fixes authentication problems.
-
Hello,
Since i have downloaded the new version of OS mavericks 10.9, i can't use adobe pdf and java anymore (all the softwares are updated) what can i do?
thank you for the helpUninstall version 6, Google for a download site for version 5.1. Problem solved.
-
I can't download the new version of iTunes. Halfway through the installation a pop up window appears saying, "There is a problem with this Windows installer package. A program run as a part of a set up did not finish as expected. Contact your support personnel or package vendor.
Got exact same problem, was told to delete all old apple, quick time and bonjoir from computer then it would work. I use a programme called malware bytes and this takes everthing out of your computer right down to the roots but unfortunately I still have same problem
-
can somebody help me please?? if i update to the new version of itunes, will it delete the music i already have??
No it will not.
The music is yours on your drive, only you, or malware or a drive crash, can delete that data.
pLeAsE make backups of your valuable data.
Apple makes it's easy in iTunes, File > Library > Backup to Disk Feed it DVD-R's label and data, or use a external drive.
Apple doesn't reinssue downloads. The music is yours you bought it. -
My computer says I need to download a new version of iTunes but mt iPad will not let me
My computer says I need to download a new version of iTunes on my iPad but my iPad will not let me
You update itunes on your computer, not your iPad.
-
Since I have updated to the new version, iOS 7, I have noticed the battery does last long as it was in iOs 6. I have already updateed to 7.0.2 the latest version. Some friends have the same problem May I know the reason?
You need to update iTunes to 11.1 on your PC
-
Dose anyone know how I can play my old garageband songs on the new version?
What happens when you try to open them?
The GarageBand Help does not say anything about the compatibility with earlier versions.
Try to drag the old project to the GarageBand icon in the Dock or or control-click the project and select "Open with GarageBand" from the pop-up menu. If GarageBAnd can open the project at all, it should convert the project and save a copy in the new format.
If that does not work, and you still have Gaa
rageBand '11 installed, try to open the project first in GarageBand '11 to upgrade it and then in GarageBand 10.0. -
Went to open Firefox this morning. It said I should upgrade to the new Firefox. I downloaded as requested. When complete, I tried to open Firefox and it said the new version isn't compatible with my older Mac. How do I get the older version of Firefox on my system and get rid of the new one that won't open??
* Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
Maybe you are looking for
-
I Need to create a complex (at least for me !!)view can some body throw some ideas I have two tables TABLE-1 NAME SYSTEM DT AAA GRADE-A DATE AAA GRADE-B DATE BBB GRADE-A DATE BBB GRADE-B
-
Serial Communication through TCP/IP Socket
There are several companies offering a serial to ethernet software solution--emulating a terminal server, however they are all for Windows or MAC. I am looking for a starting point, examples, or a final solution (yeah) that is 100% java. In the field
-
OS X Leopard and VirtualBox 2.2.4
So I'm trying to install Arch in VirtualBox 2.2.4, but nothing seems to work. I try to setup the network, it tells me to check /dev/tty7. I try to format the drive, it tells me to check /dev/tty7. I try to select packages, it says pacman error check
-
Sorry for the long story but please i need some answers. Macbook Pro 15" (2010 mid) Hello everyone, I've bought my mbp 19 months ago. After 3 months story started.When i bought it people were complaining about battery life screen issues and stuff.I w
-
Zen Sleek / Vista Compatability Er
I've searched this forum and found only one post with an answer to the Zen Sleek / Windows Vista compatability problem Its a good thing NO ONE gives a straight forward answer to the situation all i'm looking for is a solution to this situation, my co