I upgrade to ios6 but know when i recive a pic on the viber it is not saved in photo

iI AM USING ISO 6 ON MY IPHONE 4 S ,THE PROBLEM THAT WHEN I RECIVE A PIC ON VIBER IIT IS NOT SAVED AT PHOTO
CAN ANY ONE HELP
TKS

The confusing part is that Mail is doing this inconsistently.
Take a look at this article and see if it helps eventhough it is written for Mac OS X 10.5 it should be true for other versions.
Look at the point about directing Mail to a location for Sent mail and see if that helps.
For some reason certain messages are being saved in the wrong location.

Similar Messages

When I render a video Pre Elements 12 or 13 and save it to work on later. When I bring it back up the rendered file is not saved. I have to render it again. Can it be saved. Pre Ele 1 would save.

when I render a video Pre Elements 12 or 13 and save it to work on later. When I bring it back up the rendered file is not saved. I have to render it again. Can it be saved. Pre Ele 1 would save.

[discussion moved to Photoshop Elements forum]

I bought iphone from Canada but now I'm in Thailand and I upgraded to ios6 but I couldn't turn on wifi and back up on icloud so I want to know that how can I claim my iphone with apple care because no apple store in Thailand. Thank you.

I bought iphone from Canada but now I'm in Thailand and I already upgraded to ios6 but It doesn't work well.I couldn't turn on wifi and back up on icloud so I want to know how can I do with my iphone because no apple store in Thailand.Can I send it to any apple care which is easy and near my country? Thank you.

You can find a local shop and pay to get it fixed or you will need to send the phone to someone you know in Canada and have them take the phone into Apple for service. Then they will need to ship the phone back to you. The warranty is based in the original country of purchase.
Decide which is your best option.

I tried to register to the facetime and imesseage in the IPAD2 after upgrade to IOS6 but telling me that apple ID is not correct but iam sure that my Appple ID is correct please help me

I tried to register to the facetime and imesseage in the IPAD2 after upgrade to IOS6 but telling me that apple ID is not correct but iam sure that my Appple ID is correct please help me

sckofusernames77 wrote:
but it doesn't ask you if you have one or say that you won't be able to log on without one.
Well, it does say on http://www.apple.com/icloud/setup/pc.html in step 1: "To enable iCloud on your Windows PC (Windows 7 or 8 required), first set up iCloud on your other devices, then install the iCloud Control Panel for Windows.
If you're trying to back up your device to iCloud, that doesn't have anything to do with your computer. You back up to iCloud over wifi. All you do is go to Settings>iCloud, sign in with your Apple ID to create your account, scroll down and tap Storage & Backup, then turn on iCloud Backup. You can then tap Back Up Now at the bottom to start the back up manually, or lock the screen and connect it to your charger and it will back up automatically every day.
Enabling the iCloud control panel on your PC only allows you to sync your iCloud data with your PC, not to back up your device to iCloud.

HT201441 i have no before owner to active my mini i pad . when i format ipad then i face a apple account . but know at this time no owner of the apple account . how i can fix it .... pls tell us

i have no before owner to active my mini i pad . when i format ipad then i face a apple account . but know at this time no owner of the apple account . how i can fix it .... pls tell us

Are there any dialog boxes popping up behind your Yahoo screen?
I have intermittent problems attaching files in Yahoo mail and this is usually the reason. I'm also using an iMac (10.7.3) and this is likely the problem.
It is generally a Yahoo issue rather than a Mac problem.

Does anyone know when OS Mavericks is available in the UK Please

I keep trying to download free OX Mavericks softwafe upgrade but always get the response product not available in your store. does anyone know when it will be available in the UK please.
Thanks for your help!

The iTunes app has nothing to do with getting Mavericks or any other Mac app or update. Are you sure you're following the steps shown here?
http://www.apple.com/uk/osx/how-to-upgrade/
including confirming that your iMac will support Mavericks?
If so, if you're using a URL to try and get the download, try just going into the App Store app and selecting Mavericks there. A URL may be directing you to the wrong country. If you're trying from within the App Store app, then as rack tack suggested, confirm that the App Store is pointing to the correct country; scroll down to the very bottom of the main page and make sure that the flag icon is correct for the UK.
Regards.

I am experiencing difficulties opening some web-based PDF files on my iPad. I was having the same difficulty opening the same PDFs on my iMac (after I upgrade to Yosemite) but was able to overcome it by adjusting the Adobe Reader plug-in settings.

I am experiencing difficulty opening some web-based PDF documents on my iPad. I had exactly the same difficulty on my iMac (after I upgraded to Yosemite) but was able to overcome it by adjusting the Adobe Reader plug-in security settings in Safari (in OSX).
Unfortunately there does not seem to be a way to similarity adjust the security settings in Safari in iOS 8.
The message I get when I attempt to open the PDF (on my iPad) is as follows:
            "To view the full contents of this document you need a later version of PDF viewer. You can upgrade to the latest version of Adobe Reader from ..."
Needless to say this is unhelpful for two reasons:
- I have the very latest version of Adobe Reader; and
- in iOS Adobe Reader is not a plug-in and plays absolutely no role in opening web-based PDF documents.
If anyone has experienced this difficulty and has been able to overcome it I would be most appreciative to hear of you solution.
Cheers
AlbertaRic

Did you check what I would consider the first place to look:
* http://kb.mozillazine.org/Problematic_extensions
If the site is still down (at least 12 hours) when you read this try [http://webcache.googleusercontent.com/search?q=cache:http%3A//kb.mozillazine.org/Problematic_extensions Google's cache]
Link or url would make it easier to see which page you tried rather than "your online solution for ...".
* http://kb.mozillazine.org/Firefox_hangs ([http://webcache.googleusercontent.com/search?q=cache:http%3A//kb.mozillazine.org/Firefox_hangs cached version])
* http://kb.mozillazine.org/Firefox_crashes ([http://webcache.googleusercontent.com/search?q=cache:http%3A//kb.mozillazine.org/Firefox_crashes cached version])
* [https://support.mozilla.com/kb/Firefox%20hangs#os=mac&browser=fx4 Firefox hangs | Troubleshooting | Firefox Help]

I have a macbookpro. when I connect any camera to the mac it does not show as a device. How do I load my pictures to either iPhoto or Aperture? It worked before but just stopped working. Any suggestions?

I have a macbookpro. I use Aperture and Iphoto. When I connect any camera to the Mac it does not open it as a device in Iphoto, Aperture or in Finder. It use to work but just stopped. Any sugestions?

Here is the full story. It may be long so please bear with me. I take a lot of pictures and movies. Since I have over 30,000 pictures I decided to place the Iphoto library on an external drive to save space on my internal drive since ot was getting very full. After I did that it worked fine for a while. Then one day I could not open the Iphoto library. Since I was overseas at the time I brought it to the IStudio ( not an Istore) overseas. They said to rebuild the library and they would do that for me. It took all day since I had so many pictures. When they called me and told me it was ready, I went to pick it up. They started to show me the new library. It crashed again. Not knowing how to fix this at the ISudio, they installed Aperture and imported the Iphoto library. This worked fine for a short time.When back in the states, it crashed again just like Iphoto. I took it to the IStore. They did not know why the overseas Istudio did what they did what they did and rebuilt my aperture library. Again it worked fine. Now that I am overseas again. It crashed again. However, I concluded that the reason for these crashes is becuase I have the file on an external drive that derives its power from the Mac and not by itself. When I use it and stop for a while the MAC will go to sleep and this cuases the external drive to shut down. This then causes the library to have inconsistancies. Therefore, when it happened this time I tried to repair the library and after 36 hours it would close down Aperture. Therefore I decided to rebuild the library. That did not work either. So I tried opening the Aperture library with Iphoto. That seemed like it was going to work but after importing half of the 30,000 plus pictures. I photo shut down. I then made a new aperture libary and erged the old library with it. This worked. I now have an aperture library that works. However, when I plug my camera into the MAC nothing happens. The camera does not show up in devices in either Aperture, I photo nor in Finder. The USB port and cord I use works fine becuase I can read my external hard drives fine. I checked as SIG suggested in this thread and everything is set to open aperture when the camera is connected.
I have the newest OS version 10. 7. 2 and the computer frequently updates all my programs. I have not installed any ne software lately. The problem happens both if I am on battery or plugged in. Just before I came overseas the IStore replaced the Battery. I can go back to the IStudio here overseas but the last time I was there and told them about the problem ( I did not have my computer with me) they did not impress me with their wisdom. I will be back in that city in a month and can go there if need be. Thanks for all the help so far. God bless.

Hi, Trying to buy an upgrade of photoshop elements, however, when I go to any of the pages it comes up with an error - 413 Header Length too Large.

Hi, Trying to buy an upgrade of photoshop elements, however, when I go to any of the pages it comes up with an error - 413 Header Length too Large.

Hi Johnson,
the maximum request size is 10000 characters. To translate larger documents you'll need to break them into smaller chunks. When using the HTML mode, make sure you send a complete element, for instance the whole <p> element up to and including the </p>.
Also make sure not to break requests in the middle of a sentence. Translator needs whole sentences to translate. You can use the BreakSentences method to find sentence boundaries. Breaksentences is also subject to the 10000 character request size limit.
Let us know if this helps,
Chris Wendt
Microsoft Translator

I've tried to purchase Mountain Lion but when I click 'buy' I get the message, "We could not complete your purchase. OS X Mountain Lion is not compatible with this computer." I'm using an iMac with Lion OS on it, Why is it incompatible?

I've tried to purchase Mountain Lion but when I click 'buy' I get the message, "We could not complete your purchase. OS X Mountain Lion is not compatible with this computer." I'm using an iMac with Lion OS on it, Why is it incompatible?

Your Mac must be one of the following models:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
From here > Apple - Upgrade your Mac to OS X Mountain Lion.

Do you know when Adobe is going to certify the new Nvidia K4200 GPU?

I recently bought the new Nvidia K4200 GPU card, but it seems Adobe has not certify this card

Hi Bill
I am using Premier Pro CC 2014 and After Effects CC 2014
I have 16 GB of RAM, an SSD of 500GB, and the CPU is an Intel 3770
Attached you can find the screen where Adobe say is using Open GL 2.1.2
I feel the performance is poor, I asked Nvidia and they told that the problem is Adobe has not certify that card and to ask you when are you planning to do it
Regards
Juan Antonio Tejedor
De: Bill Gehrke
Enviado el: jueves, 06 de noviembre de 2014 08:26 p.m.
Para: Juan Tejedor
Asunto: Do you know when Adobe is going to certify the new Nvidia K4200 GPU?
Do you know when Adobe is going to certify the new Nvidia K4200 GPU?
created by Bill Gehrke <https://forums.adobe.com/people/Bill+Gehrke> in Premiere Pro - View the full discussion <https://forums.adobe.com/message/6907448#6907448>

Does anyone know when Apple is going to fix the problem that the Iphone 4 has with transfering voice memos to itunes?

Does anyone know when Apple is going to fix the bug with transfering voice memos from the IPhone 4 to itunes on a computer. I waisted a lot of time trying to figure out why it was not working. Then I read some comments about other people having the same issues.
cheers!

Anyone that did know would be bound by non-dosclosure agreement not to say.
Unless Apple announces, which they very rarely do, there is no way to know what Apple will do in the future or when they will do it.
Sorry.

HT1657 I rented movies on my iPad, they all downloaded, but when I click 'play' it says 'The requested URL was not found on this server'. What does it mean and how can I restore my rented movies?

I rented movies on my iPad, they all downloaded, but when I click 'play' it says 'The requested URL was not found on this server'. What does it mean and how can I restore my rented movies?

See this previous discussion:
https://discussions.apple.com/message/16962474#16962474

My ipod touch just shows the charge symbol on the screen and i checked whether there is a problem in the charger but it works perfectly on my iphone 4 and when my ipod is connected to the computer itunes is not recognising my device pls help me

my ipod touch just shows the charge symbol on the screen and i checked whether there is a problem in the charger but it works perfectly on my iphone 4 and when my ipod is connected to the computer itunes is not recognising my device pls help me

tmplHi pranoop,
If you are having an issue with your iPod touch not being recognized by iTunes when connected to your Windows computer, I would suggest that you troubleshoot using the steps in this article -
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
Thanks for using Apple Support Communities.
Sincerely,
Brett L

When I get a phone call or text message it will not make the sound. Just vibrate. But the switch is on normal. When I change it to vibrate the volume thing will not show. Nor will my up volume up key work. Is there any way to fix it?

When I get a phone call or text message it will not make the sound. Just vibrate. But the switch is on normal. When I change it to vibrate the volume thing will not show. Nor will my up volume up key work. Is there any way to fix it?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

I upgrade to ios6 but know when i recive a pic on the viber it is not saved in photo

Similar Messages

Maybe you are looking for