I upgraded a MacBook Pro and a iMac to 10.8.3
I upgraded a MacBook Pro and a iMac to 10.8.3.
Formerly the MB Pro was on 10.8.2 and working like a charm. (Lion, not Mt. Lion.)
Now both machines are working ok, just really slow. It takes almost a minute to open mac applications, like mail and Safari. I feel like they are both running like my old dial-up internet connection years ago.
I am so distressed, because it looks like it will be a huge deal to downgrade to earlier version.
I have not tried the combo update since I was so disgusted by all the time I had wasted. Do you think it is still worth a try?
Thanks!
Try starting in Safe Mode and see if the problem still occurs?
Restart holding the "shift" key.
(Expect it to take longer to start this way because it runs a directory check first.)
Does this make a difference?
Similar Messages
-
Maverick and Your System message
I've updated my Macbook Pro and my iMac with Maverick, updating the various apps (Pages, Aperture, iPhoto, Numbers & iMovie, too) in the process.
On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory message. But it's not Calendar, it's Mail that not only won't open, but when it does now, it takes the entire system out with it.
I open Safari, and it works. I open Firefox, and it works and Safari still works. I open Calendar and it works, Safari and Firefox continue to work. I open Reminders, and everything still works.
I open Aperture, and it opens Finder instead, showing the 3.5 update that was installed two days ago (and Aperture has functioned), but doesn't seem to update the app; after about 20 seconds the update disappears and I can now open Aperture and it shows I'm now opening the updated Aperture, which it didn't show before.
I click on Mail, and the cursor spins for ten minutes. The mail window finally opens, but the cursor spins and does not connect to upload new mail, and I finally Force Quit Mail. Since the Maverick update, even though Mail was not updated (and maybe because Mail was not updated), I have been able to receive emails twice, and then the program crashed.
Besides the Aperture app, Pages didn't fully update on the iMac, and I had to remove the old Pages icon from the dock after the new program loaded up from Applications.
Any ideas?Maverick and Your System message
I've updated my Macbook Pro and my iMac with Maverick, updating the various apps (Pages, Aperture, iPhoto, Numbers & iMovie, too) in the process.
On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory message. But it's not Calendar, it's Mail that not only won't open, but when it does now, it takes the entire system out with it.
I open Safari, and it works. I open Firefox, and it works and Safari still works. I open Calendar and it works, Safari and Firefox continue to work. I open Reminders, and everything still works.
I open Aperture, and it opens Finder instead, showing the 3.5 update that was installed two days ago (and Aperture has functioned), but doesn't seem to update the app; after about 20 seconds the update disappears and I can now open Aperture and it shows I'm now opening the updated Aperture, which it didn't show before.
I click on Mail, and the cursor spins for ten minutes. The mail window finally opens, but the cursor spins and does not connect to upload new mail, and I finally Force Quit Mail. Since the Maverick update, even though Mail was not updated (and maybe because Mail was not updated), I have been able to receive emails twice, and then the program crashed.
Besides the Aperture app, Pages didn't fully update on the iMac, and I had to remove the old Pages icon from the dock after the new program loaded up from Applications.
Any ideas? -
I have tried to turn off my modem and after that i turned on each machine individually it worked for a while giving my macbook pro and my Imac different IP address.. but the problem came back again and im here with 2 similar IP addresses on each machine and once that happen i lose the internet on both of them.. and I get an exclamation mark on my Airoport symbol.
how can i change my IP address and where can i get a new 1.. should i just make it up..??
TYsirioluce wrote:
I have tried to turn off my modem and after that i turned on each machine individually it worked for a while giving my macbook pro and my Imac different IP address.. but the problem came back again and im here with 2 similar IP addresses on each machine and once that happen i lose the internet on both of them.. and I get an exclamation mark on my Airoport symbol.
how can i change my IP address and where can i get a new 1.. should i just make it up..??
TY
What router are you using? -
If I own a Macbook pro and an iMac can I have final cut pro downloaded to both with one purchase?
If I own a Macbook pro and an iMac can I have final cut pro downloaded to both with one purchase?
If you purchase Final Cut Pro X at the Mac App Store, you can install it in all your Macs free of charge as many times as you want. The same applies for all the applications you purchase at the Mac App Store
-
Hi I have a Macbook Pro and an Imac, so my question is if have to buy 2 OS X Mountain Lion or can i buy one and install on 2 computers?
Buy it once and then you can install it on any mac associted with your Apple ID.
http://support.apple.com/kb/HT4854?viewlocale=en_US -
I own a MacBook Pro and an iMac. How can I copy my iPhoto library from my MacBook to the iMac?
I own a 13" MacBook Pro and a 27" iMac and I have different iPhoto libraries for each one of them.
How can I copy the iPhoto library from the MacBook to the iMac without losing the pictures I have on the iMac library?
Is it possible to merge the libraries?
Can I do this without using an external HDD? (e.g. connecting them through an ethernet cable?)
Thanks for your help!1. By eirher a: renaming one of the Libraries or b: copying them to another folder
2. If you have Aperture 3.3 or later and iPhoto 9.3 or later you can merge libraries with Aperture.
Otherwise the only way to merge Libraries is with the paid ($20) version of iPhoto Library Manager
3. Yes. -
Non-Apple SSD upgrade of MacBook Pro and trim enabling
Hello.
I have a question about non-Apple SSD upgrade of MacBook Pro. I was planning to go and buy an SSD in a couple of days but I have coincidentally come up with a web page mentioning trim enabling to extend SSD life on MacBook Pros. Actually the article suggested that if trim is not enabled, the SSD performance degradation will start very quickly due to a high number of writing and deletion of data to the same location on the SSD. Apple's original SSDs are really expensive, I checked that. Is there anyone who upgraded with a non-Apple SSD and did not enable trim and realize the SSD performance degradation? Is there anyone who could easily enable trim and is using his Mac efficiently with a non-Apple SSD? I will be glad if you could share your experiences. I really want to improve the speed of my Mid 2012 13 inch MBP but I have to be sure before doing that. I am also planning to buy a Samsung Evo 840 250 GB SSD.
Regards and thanks in advance,
BugraYes you need to install and run TRIM Enabler after your OS X is installed or reverse cloned onto the GUID/OSX extended Journaled formatted SSD from a external boot clone drive of the previous internal drive.
Also you need to run it after some OS X updates and of course upgrades, you'll notice the immediate performance drop if you don't.
It's available over at MacUpdate.com, you'll have to right or control/alt key click to "Open" it to bypass OS X Gatekeeper.
Read these user tips, you can clone your present internal drive to the new SSD using a SATA to USB adapter/Carbon Copy Cloner (not Superduper) and then reboot and hold option/alt key down on a wired keyboard to boot from it and test before making hardware switch.
Make a bootable clone of your boot drive
Upgrading Your MacBook Pro with a Solid State Drive
Install/upgrade RAM or storage drive in Mac's
Of your going the fresh install or + TimeMachine restore route, then also read this
Reset your Mac -
Graphics nightmare after Yosemite upgrade on Macbook Pro and iMac
I have upgraded my 2013 iMac and my 2012 Macbook Pro Retina to Yosemite.
I am getting endless graphics glitches and crashes on both machine on all programs.
I've attached a screen shot from my Macbook Pro today.
I have updated the NVIDIA drivers on both machine and no difference.
Any help appreciated as I don't want to revert back to Mavericks (which was perfect)
Thanks1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.CS5ServiceManager com.adobe.fpsaud com.apple.AirPortBaseStationAgent com.apple.installer.osmessagetracing com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.Java-Updater com.oracle.java.JavaUpdateHelper ' ' 879294308 1083382502 1274181950 464843899 1233118628 3301885676 891055588 998894468 695903914 1106243579 1443423563 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i];if(n<10) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i]".plist";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' '/\./p' '/\.appex\/Contents\/Info\.plist$/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:|suhel| VALI|ver-r|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" 'L*/P*/com.ap*.p*.ext*.*.*t -exec '"${c1[14]}"' :displayOrder" {} \;' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors appexes );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 4 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Hi folks, I have a few questions regarding Final Cut Pro
I'm a professional musician who requires the use of Final Cut Pro for video lessons; i'm not a professional video editor, but I know my way around for what I need to do. I share my recording studio with two other folks and don't always have access to my studio where Final Cut Pro is installed on my decked out Mac Pro
I m considering purchasing an Imac for home editing and a macbook pro for when i travel (as I travel frequently for my job).
I will only be using the Imac and Macbook pro strictly for basic editing. In other words, I won't be using any fancy effects; there will be text, imported images, transitions, and the video files ; that's pretty much it
I was wondering what the minimum specs of each computer should be. Would the most powerful current imacs and macbook pros be overkill for my purposes?
I find that even on my decked out 8 core mac pro , certain things are a bit slow (ie exporting 5 minute videos using quicktime conversion (HD video) , can take up to 30-40 minutes!). So I wouldn't want exports to last 10 days on an imac... ( i would probably just use the laptop for editing, and transfer the projects to the imac or mac pro for exporting)
Is there anyone else out there who works in a similar way? Bring their work home, and transfer projects between computers?
While we're at it, for anyone who's doing the same thing as me, are you able to install your single user license of FCP on multiple computers (using it on one computer at a time, of course)?
"2. Permitted License Uses and Restrictions. This License allows you to install and use one copy of the Apple Software on a single computer at a time."
From what I understand, it means I can install it on as many computers as I want, as long as it's being used one computer at a time (ie my scenario).
I just don't want to get into a situation where I buy the new computers, and I am unable to install FCP on em...
thanks so much!!misterdmmc wrote:
I will only be using the Imac and Macbook pro strictly for basic editing. In other words, I won't be using any fancy effects; there will be text, imported images, transitions, and the video files ; that's pretty much it
I find that even on my decked out 8 core mac pro , certain things are a bit slow (ie exporting 5 minute videos using quicktime conversion (HD video) , can take up to 30-40 minutes!). So I wouldn't want exports to last 10 days on an imac... ( i would probably just use the laptop for editing, and transfer the projects to the imac or mac pro for exporting)
You have not included any information about what format you shoot and what format you output. Rendering and exporting/converting can be insanely processor intensive but you might be better served by getting a cmaera that shoots a format that does not require processing.
If you're just doing simple work, get iMovie or maybe explore FCPX.
bogiesan -
I own and work on two Mac computers.. a MacBook Pro (dual core, 3.06GHz, 8 GBs RAM) and an iMac ((dual core, 3.06GHz, 4 GBs RAM). Am I required to "purchase" the Garageband one-time in-App purchase of $4.99 TWICE, one for each computer..??
The answer to your question is not about the GarageBand content but the concept of downloading any apps (or in-apps purchases) from the app store. The Key is your Apple ID.
Whenever you download an app (it doesn't matter if you pay for the app or if it is free) you have to to be logged in to the App Store with a valid Apple ID. That becomes your "Online License". Whenever you are logged in to the App Store with that Apple ID you will see your Purchase History, what apps you downloaded and also what apps have updates available. As you see, this procedure is independent from your actual computer. The App Store is only interested in your Apple ID for verification.
To download an app or content on a different computer, just make sure you are logged in to the App Store with the same Apple ID you did for the initial purchase.
The button will now display (instead of Free or the price tag) "Install" because the App Store knows that you purchased the item before (with that Apple ID) and that you computer you are on at the moment oesn't have th app installed. Just click the "Install" button to download the app.
Here is how the Button looks like depending on the condition.
The same principle applies to in-app purchases. With GarageBand, when you try to restore Purchases, make sure you are logged in in the Apple Store with the Apple ID you made the original purchase.
One more thing: You don't need to be logged in to actually run an app, only for online activities (downloads, updates)
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.' -
Transferring data between existing MacBook Pro and new imac
Hi,
I have just purchased a new imac and I'm wondering the best way to transfer data from my laptop to the new mac. My Macbook Pro was running quite slow and was a bit tedious, so I'm concerned that if I use my current time machine backup to launch the imac, then some of these issues might affect the new computer. To be honest, I'm not even sure if you can do that....
I was also wondering if anyone is aware of a method which I could use to keep both computers synced, but still maintain control over what info is actually synced (the hard disk on the imac is way beyond what's available on my laptop).
Any suggestions would be appreciated.
Thanks!It would be a mistake to replace a new fully functioning system on your iMac with a potentially dysfunctional one on your MBP. If you need to transfer personal data then you can connect the two via FireWire cable and use Target Disk Mode to transfer your data manually. If you have a MobileMe account, then you can sync your Mail accounts, iCal calendars, Address Book entries, and Safari bookmarks that way.
You can use ordinary backup software to sync two computers connected by FireWire and using Target Disk Mode. You can use a USB flash drive depending upon the amount of data you need to move between the two computers. You can use an external hard drive as intermediary. However, Time Machine is not a utility intended to keep two computers synced.
You should give thought to what you need synched, as your question seems to imply you think that means everything, but I doubt that's what you had in mind. -
Should I use a macbook pro as my laptop and desktop, or have a macbook pro and an iMac?
i was wondering if i should use my macbook pro as a laptop and desktop, or if i should go ahead and buy a mac desktop too?
Just look at how many posts are on this forum, let alone the Boot Camp forum, about Windows on a Mac.
Got to any of the virtual machine software forums and take a look. Why do you thing there are 3 different virtual machine program available for the Mac to run Windows, let alone Apple's own Boot Camp system.
If it wasn't needed do you think Apple would have there own system for installing and running Windows on all Mac computers.
I personally don't know of any Mac users, and I know quit a few, that do not have a version of Windows installed on there Mac computers. Either in a boot camp partition or in one of the virtual machine programs.
There is some software that has just Windows versions. If you need that software and you own a Mac you need Windows to run it. -
Can Time Capsule be the wireless router for my MacBook Pro and my iMac G5?
My MacBook Pro was simple to hook up to Time Capsule, but now my iMac G5 will not connect to the internet. Any ideas?
Hello bluefeather. Welcome to the Apple Discussions!
How do you have the iMac G5 connected to the Time Capsule (TC) ... by Ethernet or wirelessly? If wirelessly, try connecting via Ethernet ... can it access the Internet now? What version of OS X are you running on the iMac? -
I need to install cc on two macs. My Macbook Pro and my Imac. Can I use the same account?
I have two machines I use. One primarily for photography on the move and another for mostly Indesign work. Question is can I use the same account on both as it will never be simultaneous.
DerekYes.
Mylenium -
Examples are click to purchase or click to download PDF files. This is happening on most if not all websites.
Well that's nice and all, but why not just spend the 50 bucks on a router? Also, why do you need a crossover cable? Modern operating systems do not require crossovers anymore.
~David
Maybe you are looking for
-
Even with nothing connected to my Mac Pro, I get a USB error message
Even with nothing connected, I get this error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled. I have restarted a few times and restarted in safe mode, and reset the PRAM
-
Old items are not populated after adding items into a master/detail form
Hi, I am relatively new to APEX. I am creating a master/detail form. It works well. When I add new items the older items are no more populated. Why ? For example I have an itme which is a select list as a Named LOV. At creation of the row I want the
-
Aperture 3.03 Adjustment bricks suddenly disappear
In full screen mode I will see a histogram, but the space under adjustments is blank. So far I have been able to return to view mode. The space is still blank, no bricks showing, but I can pull down adjustments and click on any brush. The adjustment
-
Dynamically populating a combo box in Forms
I am having a hard time figuring out how to dynamically populate a combo box at run time. Could someone give me any ideas? thanks, Robin
-
IPhoto won't start after upgrade 1.1 for my new iMac. Now what do I do?
Had to upgrade according to screen. iPhoto won't start after upgrade 1.1 for my new iMac. Now what do I do? I have restarted the computer. Brand new iMac intel. v 10.9.4