I upgraded my computer, now I can't use my scanner on Printer, Epson Stylus Photo TX650

I have an apple computer, and upgraded it, now I can't scan photo's from my Epson Stylus Photo TX650 printer.
I have an OSX version 10.9.5 computer
When I click on scan on my printer, I get this message ( " you can't use this version of the application "Epson Scan" with this version of OSX You have
"Epson Scan" 3.7.1)
Can you help me,
Thanks

Have you checked the Epson web site for an update?
Try using Applications/Image Capture.

Similar Messages

Trying to print e-mails using iCloud but can not add my printer Epson Stylus Photo PX810FW Why not?r

Trying to print e-mails using iCloud but can not add my printer Epson Stylus Photo PX810FW
Why not?

Trying to print e-mails using iCloud but can not add my printer Epson Stylus Photo PX810FW
Why not?

Hi just upgraded to lion , now i can't use "word" can this be for real?

hi just upgraded to lion, now i cant use "word" help please

If it's Word 2004 or earlier, it's for real. That is a PPC app and it is no longer supported in Lion. You need an Intel version of Office. You and a lot of others who didn't know are out in the cold.

10.5.4 and now I can't use my scanner

I have a Canoscan 8400F. It has been in my system (iMac, 2gHz Aluminum, 2GB SDRAM, Time Capsule, Apple TV) for a couple of years and I have never had a problem. Since the latest upgrade for Leopard was offered I can no longer get the computer to recognize the scanner. Whenever I open PhotoStudio (the software that drivsr the scanner) I get the following notice:
The necessary file could be missing or damaged, or some settings are incorrect.
Reinstall the scanner driver.
Scanner driver will be closed.
I have reinstalled the software with no success, A quick search on Google showed me that there were others that were having the same problem but no one offered any solutions. Short of going back to 10.5.3 does anyone have any suggestions?
TIA,
Paul

A quick search at Canon's site indicates updates dated late 2007, implying that your software is out-dated. Download and install the updates and see if that fixes your problem. Search http://www.usa.canon.com/consumer/ for your scanner.

On i photo, I can't change the parametrage of my printer epson stylus photo RX620. My photos, when I print aren't ok. With my PC I had no probleme

I bought a Mac and wanted to print photos with Iphoto. The problem is that I can't change the parametrage as I can do with the mail or safari. The printer isn't done for special paper like photo paper. I called Apple but they didn't find the way to change. Has somebody an idea to do that. Thank you.

Try this patch.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Cannon MP830 can't use the scanner function after upgrading to Mavericks.

I have an Cannon MP830 and now I can't use the scanner function after upgrading to Mavericks. Can someone help?

There is no ICA driver for this model so you won't be able to use Image Capture or Preview. But there is a TWAIN scanner driver and the supporting MP Navigator application available for 10.8 from Canon, so you could try installing these and see if you can scan again.

I can't use the function of "print to video".

I've recently purchased FCPX and Blackmagic Design Decklink HD Extreme 3(version 7.5.2) but I already know this combination looks quite weird because I'm using only DSR. This is the first time I have installed FCP.
I installed FCPX and figured out there's no way to get the video from Decklink on FCPX so that I deleted FCPX, installed FCP 2009 instead and installed FCPX again on the same disk as Final Cut Pro 7... It's a shame to get rid of it.
At first, I could get a good result when printing to tape. There's no problem. But it's not long before I failed to get what i wanted. VCR detects input signal from FCP 7 through Decklink but the monitor of VCR shows only noise. For now, I can't use the function of "print to video".
Also, I connect the input of Decklink to the output of DSR and the output of Decklink to the input of DSR at the same time and monitor w/ the output of DSR. However, the output on the monitor shows something weird when I capture the video from DSR as if the signal is fed back.
Someone told me that I have to use other version of decklink but i'm not sure it would be better if I just change the version.
What's wrong?
What should I do for fixing these all mess?

I've recently purchased FCPX and Blackmagic Design Decklink HD Extreme 3(version 7.5.2) but I already know this combination looks quite weird because I'm using only DSR. This is the first time I have installed FCP.
I installed FCPX and figured out there's no way to get the video from Decklink on FCPX so that I deleted FCPX, installed FCP 2009 instead and installed FCPX again on the same disk as Final Cut Pro 7... It's a shame to get rid of it.
At first, I could get a good result when printing to tape. There's no problem. But it's not long before I failed to get what i wanted. VCR detects input signal from FCP 7 through Decklink but the monitor of VCR shows only noise. For now, I can't use the function of "print to video".
Also, I connect the input of Decklink to the output of DSR and the output of Decklink to the input of DSR at the same time and monitor w/ the output of DSR. However, the output on the monitor shows something weird when I capture the video from DSR as if the signal is fed back.
Someone told me that I have to use other version of decklink but i'm not sure it would be better if I just change the version.
What's wrong?
What should I do for fixing these all mess?

I have lost all of my keynote templates now that I have upgraded to yosemite. How can I use Keynotes and pages etc on my computer and not on the cloud.

I have lost all of my previously created keynote templates now that I have upgraded to yosemite. How can I use Keynotes and pages etc on my computer and not on the cloud.

Welcome to Apple Support Communities
All iWork apps allow you to save your documents on your computer. You will be able to choose the destination when you want to save a document.
You can also disable iCloud for some apps. To do that, go to System Preferences -> iCloud, press "Options" next to "iCloud Drive" and disable the apps you want to.
If you have lost your old documents, you should have a backup that you made before upgrading to OS X Yosemite, so you only have to restore it.

HT4623 upgraded my iphone 3GS to higher iOS but unfortunately my phone has reset factory setting and now i can't use it anymore... tried to connect to iTunes but it would only say: WE ARE SORRY, WE ARE NOT ABLE TO CONTINUE YOUR ACTIVATION THIS TIME...

tried to upgrade my iPhone 3GS to a higher iOS but unfortunately it had reset factory setting... now i can't use my phone anymore... tried also to connect to iTunes as instructed but only appears: WE ARE SORRY, WE CANNOT CONTINUE YOUR ACTIVATION AT THIS TIME... WHAT SHOULD I DO? THANK YOU...

No, you do not need to nor should you jailbreak your iPhone.
If you jailbreak your iPhone, you void any remaining warranty and lose
all support from Apple including this forum.
4 possible causes to activation server unavailable message:
1] activation server is actually unavailable. Happens very rarely and
does not last long on those rare occasions. Solution is to try again.
2] your firewall/internet security software/antivirus are preventing connection
to the activation server. Solution is to temporarily turn off your firewall/internet
security software/antivirun until you have activated your iPhone.
3] your iPhone has been jailbroken or otherwise hacked/modified.
4] the computer you are using to activate the iPhone has been used to
jailbreak an iOS device.
For causes 3] & 4] you are on your own as Terms of Use for this forum prohibit
discussion of jailbroken/modified iOS devices. Google may provide some direction.
Be advised that jailbreaking/hacking your iPhone may prevent the iPhone from
being able to be activated.

HT5622 I had an iPhone 4S, I recently upgraded to a 5s and have been using it since early December. I kept my same Apple ID . I gave my 4s away, the person set up their own Apple ID for the 4s however now I can't use my Apple ID in my 5s. Any help please

I had an iPhone 4S, I recently upgraded to a 5s and have been using it since early December. I kept my same Apple ID . I gave my 4s away, the person set up their own Apple ID for the 4s however now I can't use my Apple ID in my 5s. Any help please

There could be many causes. What happens when you try to use it. also try adding it again.

Can any one tell me how to install flash player on powerbookg4.i actully uninstall it to upgrade it but now i can not install new one.it always says get flash player for powerpc when i try to install it after downloading.it is 10.5.8 version

can any one tell me how to install flash player on powerbookg4.i actully uninstall it to upgrade it but now i can not install new one.it always says get flash player for powerpc when i try to install it after downloading.it is 10.5.8 version

Flash Player version 10.1.102.64 is the last version available to PPC Mac users. However, this Flash version won't work for many videos on Facebook, YouTube and other sites. Adobe's latest version, 10.2.x or later, is only for Intel Macs. Adobe will not provide a newer Flash version for PPC Macs.
The message requesting that you download Adobe Flash Player takes you to Flash Player requiring an Intel processor. Doesn't work on a PowerPC processor. I found a hack, installed it & it works with Firefox, TenFourFox & Safari.
Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
Hack Allows PowerPC Macs to Access Flash 11 Content
http://lowendmac.com/ed/royal/12sr/flash-11-and-powerpc.html
 Cheers, Tom

HT1338 Upgraded iPad and now browser can't connect to most websites I search

Upgraded iPad and now browser can't connect to most websites I search

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
If no joy...
Reset all settings
Settings > General > Reset > Reset all Settings.
This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.
For Safari... Settings > Safari > Clear History Data & Cookies

HT204291 used to have a airplay icon on computer. now i can not find it?

used to have a airplay icon on computer. now i can not find it? could anyone help?

I had the same problem -- a recent update to my apple tv set my airplay settings (on the apple tv to off); ensure you have airplay re-enabled on the apple tv after updating.

Using iPhone 3G ,Version 4.2.1,Modem Firmware 06.15.00, In this phone i was using Facebook upgraded app and Smart Sync App. Suddenly my sisiter reset all setings and now I can't use the upgraded facebook app, for smart sync is asking for IOS 4.3,Need help

Using iPhone 3G ,Version 4.2.1,Modem Firmware 06.15.00, In this phone i was using Facebook upgraded app and Smart Sync App. Suddenly my sisiter reset all setings and now I can't use the upgraded facebook app, for smart sync is asking for IOS 4.3,Need help.

Thank you for the answers so far, but I'll make one correction: I said earlier that the Boston Globe website, boston.com, does not have a mobile site, and I would need to visit their regular website on my iPhone. Actually, I just found out that boston.com has a mobile site, so I'd obviously use that instead of the regular site. By doing that, I'd save a ton of data (I think). Does that change your answers?

I accidentally turned off bluetooth and now my keyboard won't connect. I already tried to reboot the computer. I can't use the mouse because I ca't get past the user log-in screen. Please help

I accidentally turned off bluetooth and now my keyboard won't connect. I already tried to reboot the computer. I can't use the mouse because I ca't get past the user log-in screen. Please help

http://www.cultofmac.com/247979/whoops-reconnect-your-bluetooth-keyboard-and-mac -after-logging-out-os-x-tips/
had the same problem and it worked!

I upgraded my computer, now I can't use my scanner on Printer, Epson Stylus Photo TX650

Similar Messages

Maybe you are looking for