I upgraded my iMac to version 4; it freezes the first time you click any link

Using a new iMac 2.93 GHz Intel Core i7 w/OS X 10.6.6; updated to version 4; I open browser and when I click on a link or try to do anything it freezes.
Have trashed, downloaded and installed version 4 a couple of times and it still freezes; cleared history, cache and cookies and it still freezes. Tried loading the old 3.6 version -which always worked fine - and now that freezes as well.

Snow Leopard breaks quite a few drivers - my Canon exhibited the same problem.
I eventually found updated drivers on the Canon website. You can try that with the HP, but if the all-in-one is more than a year or so old, don't hold your breath.
You can also try Software Update to see if it will offer new drivers, or failing that go to the Support Downloads site and search for HP updates.
In fact there's a new one for HP at the top of the list just now.
You may not necessarily want the latest one, though - check the specs to see if your model is covered; if not, search for the previous update etc.

Similar Messages

Upgrading my 4.3.3 i phone for the first time help

upgrading my 4.3.3 i phone for the first time help

You have to update using iTunes if you have 4.3.3 installed now. See this article:
iOS 4: Updating your device to iOS 5 or later

To open a project already under version in RoboHelp for the first time

Hello Everyone,
In RH html help it is mentioned that first time when you open
your project in the new version (I have RH v6) which was created in
the old version of RH (in my case it was created in RH x3) the
project is converted to the new project file type (.xpj) and the
old project file (.mpj) is deleted.
So far, I have done the first step and project is converted
to the new project file type (.xpj) but the old file type (.mpj) is
still there – is it might be because it was read only.
My greater concern is the next step which is mentioned in the
Help, my supervisor doesn’t agree with that which is
‘Add the project back to version control in a different
folder than the original .mpj project file. Somehow, he
doesn’t agree with that and I am really not sure if there is
going to be any impact for not doing that because currently in
Windows explorer I can see both the project file types – one
with the .mpj and the other one with the .xpj. And also, I am not
sure if the huge difference in size of both the file types is a
concern (old mpj file size is coming 544 KB & the new xpj file
size is coming only 3KB). Please, give me your feedback.
Your help is greatly appreciated,
Thanks

Hi all
Trying to clarify here. Colum is mostly right.
When an older project is opened in X5 or 6, the .MPJ file
isn't really "Converted". What happens is that an XML file bearing
the same name as the project but having the extension .XPJ is
created along with a slew of other files. The former .MPJ file is
then updated and renamed by changing its file extension. The .MPJ
extension is renamed to .CPD. I could be wrong in my assumption of
course, but I've always thought .CPD meant "Cache Project
Database".
Cheers and happy Thursday all! Rick

Need to connect to upgraded Oracle EBS R12 version from R11. The current ODI set up is pointing to R11, Can i use the same connection to point to R12? Please hele experts..

Need to connect to upgraded Oracle EBS R12 version from R11. The current ODI set up is pointing to R11, Can i use the same connection to point to R12? Please hele experts...
Rp

1. in physical connections part can i use the same work schema
2. Can i use same contexts created or do i need to create everything as new and then try?
Thanks,
Rp.
Hi,
As you mentioned that you just upgraded the database, so the data is same and schema is same you can connect with the same work schema.
Yes, you can use the same contexts , but need to do Reverse Engineering for your new database.
And about data server, i think you also have no need to create new data server, if hostname,sid and port etc are same as these were with R11(consult with your DBAs regarding it)

TS1717 I recentlu upgraded to the latest itunes version, I have now tried to open itunes for the first time since upgrading, no I find I have not got permission to open itunes. It will not launch at all???? Any ideas???

I have recently upgraded to the latest version of itunes. I have just tried to access itunes for the first time since upgrading and now I get a message saying I do not have the appropriate permissions to access it. It will not launch at all. I have also recently changed my ISP, help anyone?

This is the iPod touch forum. I requested the moderators to move your post to the iPod classic forum.

HT4623 Hello I upgraded my iPhone to version 6.1 and the device does Hfalhsl iPhone and it stuck on can not start the iPhone

Hello I upgraded my iPhone to version 6.1 and the device does Hfalhsl iPhone and it stuck on can not start the iPhone

Find an answer somewhere else or buy a new phone.
You can not get help here for a hacked/jailbroken phone.

Hello I upgraded my iPhone to version 6.1 and the device does Hfalhsl iPhone and it stuck on can not start the iPhone

Hello I upgraded my iPhone to version 6.1 and the device does Hfalhsl iPhone and it stuck on can not start the iPhone

Find an answer somewhere else or buy a new phone.
You can not get help here for a hacked/jailbroken phone.

I downloded iphoto 11 9.2 and when opened it for the first time and the program started to update my iPhoto library the file got corrupted. That has happened in the two macs I have (both of them rather new and updated to last Lion version 10.7.2).

I downloaded Iphoto 11 9.2 from the apps store (was on iphoto '09 before version 8.x) and when opened it for the first time it tried to update my photo librery and ended up corupting it to the extreme that I had to get a backup from time capsule and downgrade my iphoto version. I spent yesterday 6 hours at the genius bar in an apple store and they were not able to provide me with any other solution. In the emantime, I have to forget about about photo streaming... Any idea, is this a bug that somebody knows how tp fix?

In fairness, this isn't an issue in iPhoto 11 but one in your Library. Some file or other in there is damaged and that's what causes the crash during the upgrade.
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

I'm attempting to migrate files from iMac to new MacBook air. The estimated time shown on the display is over ten hours. Is that correct? Is there a way to do it quicker?

I'm attempting to migrate files from iMac to new MacBook air. The estimated time shown on the display is over ten hours. Is that correct? Is there a way to do it quicker?

It's quite possible, since you are using an MBA without Firewire, that it could take that long.
A Basic Guide for Migrating to Intel-Macs
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
>Classic Environment, and subsequently any Mac OS 9 or earlier applications
>Screensavers written for the PowerPC
>System Preference add-ons
>All Unsanity Haxies
>Browser and other plug-ins
>Contextual Menu Items
>Applications which specifically require the PowerPC G5
>Kernel extensions
>Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior 4.1, TechTool Pro 4.6.1, SuperDuper 2.5, and Drive Genius 2.0.2 work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking
will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
1. Repair the hard drive and permissions using Disk Utility.
2. Backup your data. This is vitally important in case you make a mistake or there's some other problem.
3. Connect a Firewire cable between your old Mac and your new Intel Mac.
4. Startup your old Mac in Target Disk Mode.
5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
>MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- Migration Tips and Tricks;
>MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
>MacBook Air- Migration Tips and Tricks;
>MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
>In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
>
>In your /Home/Library/ folder:
>/Home/Library/Application Support/AddressBook (copy the whole folder)
>/Home/Library/Application Support/iCal (copy the whole folder)
>Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
>
>/Home/Library/Keychains (copy the whole folder)
>/Home/Library/Mail (copy the whole folder)
>/Home/Library/Preferences/ (copy the whole folder)
>/Home /Library/Calendars (copy the whole folder)
>/Home /Library/iTunes (copy the whole folder)
>/Home /Library/Safari (copy the whole folder)
>
>If you want cookies:
>
>/Home/Library/Cookies/Cookies.plist
>/Home/Library/Application Support/WebFoundation/HTTPCookies.plist
>
>For Entourage users:
>
>Entourage is in /Home/Documents/Microsoft User Data
>Also in /Home/Library/Preferences/Microsoft
>
>Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.
Revised 1/6/2009

Time machine would back up only the first time after I shut off my imac and started it up again. Then it would fail or claim it could not locate my external Hard Drive even though it's icon was showing in the time machine dialog window.

Time machine only ever backed up the first time it runs immediately after I start up my computer after it has been shut off. All other back up attemps fail. Recently it stopped recognizing the icon for my external hard drive in the time machine dialog window where you select the hard drive to back up to, and turn on and off the time machine function. Now the external HD icon only shows up on the desk top but no longer in the dialog box. I just tried shutting the computer off and turning it on again and now the light is on, on the external hard drive but the icon does not even appear on the desk top.
The external hard drive is a 1TB Seagate. The drive still has plenty of unused capacity. I ran a diagnostic test on it. It said the disk needed repair but the repair function would not work. The message stated that it could not be unmounted and repair is not available because the disk can't be written to. The Mac OX utility said the disk can still be opened but can't be changed nor repaired. The external HD is not S.M.A.R.T. supported.
I haven't tried replacing the cable yet. Is that the next thing I should try?

What Mac OSX version are your running ("iOS" as shown in your profile cannot run on a Mac computer)?

I've tried to update my i-Tunes version after the site suggested I should following my i-Pad being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several

I’ve tried to update my i-Tunes version after the site suggested I should following my i-Pad Air being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several times. I then tried wiping the original software from the computer and re-downloading from scratch. Each time I tried the download failed with a message saying “Service “Apple Mobile Device” failed to start. Verify that you have sufficient privileges to start system services” At this stage, the only way forward was to “abort” the download. This I have done now four times and the same thing happens. When I did finally manage to get an i-Tunes shortcut on my desktop, the program wouldn’t open saying: “i-Tunes was not installed correctly. Please re-install i-Tunes. Error 7 (Windows error 193)” Any ideas to resolve this?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

HT1222 My phone is telling me about a Software Update but for the first time it is asking me for a passcode, I have never set up a passcode and do not know how to get around this to do the upgrade?

My phone is telling me about a Software Update 7.1.1 but for the first time it is asking me for a passcode, I have never set up a passcode and do not know how to get around this to do the upgrade?

See if this helps:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212

I just downloaded the newest reconfigured version of iTunes, and for the first time ever my content is all screwed up. Specifically, all of my playlists are gone, so are my apps. However, the music library is intact. Any ideas? Thanks.............

I just downloaded the newest reconfigured version of iTunes, and for the first time ever my content is all screwed up. Specifically, all of my playlists are gone, so are my apps. The good news is that my music library is intact and that I've got more than one device with everything as it should be on them; the bad news is that my PC does not recognise my devices and keeps defaulting to " lets sync your devices to this new computer loose all of the playlists I've spent years compiling". I don't get it. Any ideas?
Thanks

See this post.
tt2

I have the current version of itunes, but when I go to update my ipod, I am getting an error message that says that it could not back up because the backup was corrupt or not compatible with the iPod. This is the first time trying to backup.

I have the current version of itunes, but when I go to update my ipod, I am getting an error message that says that it could not back up because the backup was corrupt or not compatible with the iPod. This is the first time trying to backup the iPod. I have authorized my computer. Still no luck.

Go to iTunes>Preferences>Devices and select the iPod backjp and click on delete and try again.
Also
- Reboot the computer
- Try another cable
- Try another USB port

BW Upgrade - Starting Prepare for the First Time

Hi,
I'm starting the prepare for the first time and I received this message "You must be BD2ADM to run this command." I login as BD2OFR.
I'm trying to upgrade our BW 3.1C with kernel 640 to NetWeaver 2004 SR1.
Do you have any solution for this problem I cannot continue with the prepare.
Thanks,
Ramon

Hi Ramon,
I ran into the same error ... (but it was very late night and therefore I don't know if I did something wrong and I forgot to talk to SAP on this)
But:
- For the 7.00 Upgrade you NEED sidofr and not sidadm!
- I used the following workaround - run with sidofr -:
SAPUP UPGDIR('/usr/sap/put') PARMLIST('check')
(instead of prepare - which is the same - with this trick the first error message was "skipped")
Regards
Volker Gueldenpfennig, consolut.gmbh
http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de
P.S.: Sorry SAP collegues, that I didn't mention this issue, but I'm always (when it is not midnight) using the SAPup-prepare above and therefore rarely see this problem.

I upgraded my iMac to version 4; it freezes the first time you click any link

Similar Messages

Maybe you are looking for