I upgraded my iPod Tounch to iOS 5.0 and the orientation will not change.
I upgrade to iOS 5 and now the orientation does not work. I checked the orientation lock and it is off. Any suggestions to get the auto orientation working again?
You can try the standard fixes to rule out a software problem:
- Reset. Nothing will belost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restoring from backup
- Restoring to factory defaults/new iPod.
Similar Messages
-
I have an Ipod touch version 4.2.1 and the instructions do not detail how to update to iOS 5. Can you help me with step by step instructions.
iOS 4.2.1 suggests that you may have 2nd generation Touch, which cannot be updated past iOS 4.2.1
Check http://support.apple.com/kb/HT1353 for help in identifying your model. A quicker method may be to check the back casing. If your iPod has Model No.A 1288 etched into it, then it's a 2nd gen Touch.
Assuming that you are using the latest version of iTunes (today, that is 10.6.3), to check if your iPod can be updated, connect it to your iTunes and look on the Device/Summary pane. Select Check for Updates. If there is one, you will see a message telling you that and how to install it. However, if you see a message saying that your iPod is up-to-date, then it cannot be updated. -
I upgraded my iPhone 4 to ios 7.4 and the screen stopped working i can not use the phone How to fix it ?.
Hold the HOME and SLEEP buttons at the same time until an Apple logo appears. If nothing has happened after holding for 30 seconds charge the phone for 15 minutes with the wall adapter and try again.
-
upgraded to ios7 iphone now displays itunes logo and usb cable will not restore, will not restart
Hi there emynona,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
-Griff W. -
I own Final Cut Pro 6 and have been running it on an older G4 tower. I upgraded to a MacPro tower and the app will not install. I get a message "Not supported on this computer" cannot believe this. Help anyone.
Here are the min. system requirements.... it looks like you meet them.... but I may have missed something...
Final Cut Studio 2 (Including Final Cut Pro 6)
• A Macintosh computer with a 1.25GHz or faster PowerPC G4, PowerPC G5, Intel Core Duo, or Intel Xeon processor
• 1GB of RAM
• An AGP or PCI Express Quartz Extreme graphics card (Final Cut Studio is not compatible with integrated Intel graphics processors)
• A display with 1024-by-768 resolution or higher
• Mac OS X v10.4.9 or Mac OS X v10.5.5 or later
• QuickTime 7.1.6 or later
Additional Recommendations
• 2GB of RAM when working with compressed HD and uncompressed SD sources
• 4GB of RAM when working with uncompressed HD sources
• A display with 1280 x 1024 resolution or higher
Additional Requirements for Motion
• A standard or built-to-order system configuration with a NVIDIA GeForce 5200, FX Go5200, FX 5200 Ultra, 6600, 6600 LE, 6800, 7300, 7300 GT, 7800, 7600 GT, 8600, 8800 or Quadro class graphics card.
• A standard or built-to-order system configuration with a ATI Radeon 9800, 9700, 9600Pro, 9600XT, 9700Pro, X800, X1600, X1900, or X2600 class graphics card; or a ATI Mobility Radeon 9700 or 9600 graphics card.
• For 16- and 32-bit rendering: a graphics card with at least 128MB of VRAM.
Additional Requirements for Color
• The standard graphics card in any Mac Pro, 17-inch MacBook Pro, 24-inch iMac, or 2.5GHZ or faster Power Mac G5 Quad:
• ATI Mobility Radeon X1600
• ATI Radeon X1600
• NVIDIA GeForce 7800 GT, 7600 GT, 7300 GT, 6800 Ultra DDL, 6800 GT DDL, 660, or Quadro FX 4500.
• For 32-bit rendering: a graphics card with at least 256MB of VRAM.
• A display with 1680-by-1050 resolution or higher (excluding 20" iMac); dual displays are highly recommended.
• A three-button mouse for full functionality
Apple article on Final Cut Studio 2: http://support.apple.com/kb/SP535 -
I have upgraded my iphone 4 to 4.3.5 and the facetime is not activated.. What should i do?
Help here > Apple - Support - FaceTime
-
I bought my ipod touch from usa...and the wifi does not connect.does it have something to do with that its not from india?
So you have tried connecting to open network that do not require a password and it was still unable to connect? If that is the case.
Does Wifi appear grayed out on your iPod via Settings -> Wi-fi?
Have you seen this article yet?
http://support.apple.com/kb/TS1398
B-rock -
On i pod touch the orientation does not change when I turn it on it's side when using safari etc. When viewing youtube it only displays widescreen and will not display portrait , anyone any ideas? is this a fault or do all ipod touch do this?
The user guide says:
Movies viewed in Videos and YouTube appear only in landscape orientation. Street views in Maps
also appear only in landscape orientation.
Do you have the scree orientation lock turned on? If on there is a circular arrow icon with a padlock inside next to the battery charge icon in the upper right. -
Why does a meesage pop up when I connect my iPod touch saying that the device will not work because the Apple mobile device hasn't been activated?
Refer to this article to restart AMDS:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567 -
Ipod touch home button stuck and the power will not turn on
Can someone help me? My daughter's ipod touch 4th generation has a stuck home button. We have changed the settings so that the alternate home button is on the screen; however, while she was using it earlier, the ipod shut off and will not turn back on. We have tried to plug it in, hold the power button, etc. Since the home button doesn't work, we can't hold the power and home buttons simultaneously as recommended. Any other ideas?
Try:
- iOS: Not responding or does not turn on
When it says place the iPod in recovery mode, place the iPod in recovery mode using:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My ipod touch is not listed as a device when connected to my computer. As suggested I attempted to download the latest of itunes. I got an
ox8007054f error code and the down load will not complete. I have also tried to restore my computer to an earlier setting, but it will
not accept the change.Have you looked at this completed previos discussion. It discusses 0x8007054F.
Re: Error message when trying to install iTunes -
dose anyone know how to get iphone 4 with ios 7.1 to sync to itunes
Thanks, jimimac 60, I wasn't seeing the dialog ("Do you trust this computer?") no matter what I did, so I turned off wifi sync in itunes and the device synched over the cable.
-
Recently my 5th generation iPod Touch stopped keeping time. As long as the screen stays on, it will stay accurate, but once it "sleeps" the time reverts to the last accurate time it had. If I go to Settings>General>Date&Time> and turn Set Automatically off and on, it will catch up, but just for as long as the screen stays on. Not too friendly for battery life that way. Also, maybe unrelated, the Bluetooth function will not turn on. When I try to turn it on, I just get a constant spinning wheel.
I have tried everything from a simple restart to a full device wipe back to factory default. No change. I took it in to the Genius bar this afternoon. They tried a diagnostic and another wipe. Then they said they didn't know and I could pay $150 to replace it. Not a bad deal, but not what I wanted to hear.
Any ideas?All I can suggest is
Try DFU mode and then restore again to factory settings/new iPod
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
If still problem that means a hardware problem -
Upgraded iMac to ML but not my MacBook Pro and the MBP will not print wirelessly
Upgraded iMac to ML and can print wirelessly to HP5200C, but Mac Book Pro, which is not yet upgraded to ML will not.
Do you have the latest HP drivers, available from Apple here, on your MBP?
I see that the HP Deskjet 5520 series are supported...
Clinton -
ipod 16g, 2nd gen had the spinning circle running for hours. the unit also go very hot.
i performed a reset twice as well as a brand new reset to factory settings. I still got the spinning circle.
i also did a DFU. brought me to the apple sign, followed by a spinning circle and a 'slide to unlock' page that will not slide.
please advise.Likely a batter problem since high temperatures destroy a battery. I wold make an appointment at the Genius Bar of an Apple store to see what they say. It is free except for your time.
Maybe you are looking for
-
G4 laptop shows up / disappears randomly on both home and office network
I have a G4 laptop that I take between my office and home and for years have had no problem transferring files between it and multiple Macs at both locations. Something has happened in the last few days in which the G4 will show up sometimes on the b
-
How to embed URL of deployed java servlet into Android code
I have deployed my servlet code on cloud which access the database cloud , but when i try to access the URL of deployed application , it asks for my credentials (username and password).... Now that i want to embedd my servlet link on cloud to my andr
-
Sum Fields based on change in another field
I have data that looks like this <Records> <VBLEN>123</VBLEN> <MATNR>012356</MATNR> <ZSPR>1.02</VBLEN> </Records> <Records> <VBLEN>123</VBLEN> <MATNR>568954</MATNR> <ZSPR>2.05</ZSPR> </Records> <Records> <VBLEN>856</VBLEN> <MATNR>259865</MATNR> <ZSPR
-
How does one get unresolved issues resolved beyond calling 1-800
I realize I'm the common denominator in all this but seriously I need some help and everytime I call to try and have my account adjusted I get to the same problem that there is an "open" ticket and they can't make any changes. I'm on the phone for a
-
When trying to burn a DVD, I have Disc Burning Errors. What Can I do?
When trying to burn a DVD, I have Disc Burning Errors. What Can I do?