I upgraded our CAM/CAS servers from 4.8.2 to 4.9.0 this weekend

I upgrade the servers from 4.8.2 to 4.9.0 this weekend and all of the servers now crash when introduced to user traffic. The upgrade shows no errors and I have not had a problem in the past the servers are 3355s. Has anyone else upgraded to 4.9.0?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

How do I upgrade PS camera raw converter from 6.6 to 6.7 I currently have CS5

I am trying to update the firmware on PS CS5 in the Camera Raw converter. I have 6.6 and need 6.7 to read my canon 5d mk III raw files. when I attempt to upgrade from inside PS help everything downloads fine into a box and at the end of the download I keep getting the following:
Photoshop Camera Raw 6.7 Update
There was an error downloading this update. Please quit and try again later.
there is a link for customer support which suggest that the serial number to my product is not for a qualifying product or that I need to have my serial number unlocked
I contacted customer service chat and talked with a tech. we went through it twice with him unlocking a full version CS5 serial number on my PS page and it still comes up with the same message - HELP

The last iPhoto for your Mac is iPhoto 9, not 9.5 or higher.
You may be able to call Apple a purchase a disk.
You can also purchse it over the internet:
https://www.google.com/shopping/product/1493369428672210473?rlz=1C1CHFX_enUS427U S428&es_sm=122&biw=1920&bih=1075&q=purchase+ilife+09&revid=548119861&bav=on.2,or .r_qf.&tch=1&ech=1&psi=xnZnVLOPOtSsyAS954GYCw.1416067237692.3&sa=X&ei=o3hnVKfHI9 KAygSj3oDYAg&ved=0CI0BELkk

Embedded systems (PIC based): We are looking to upgrade our GPIB controller chip from Ines iGPIB7210 to a more "mainstream" chip and are interested in NI's offerings.

Ines provides a library of ANSI C source to drive their GPIB chip from any suitable processor (as do ComputerBoards). Do NI have a source code library for their driver chips? BTW it doesn't need GPIB "Controller" capability. The uP controlling the GPIB chip is a Microchip PIC18C452.

Hi Mr James,
Thanks for your question ..We are also planning to have GPIB interface for our equipment .Again we are new to the interface design .For our equipment we dont need controller capability.I think Ni TNT 488.2 T/L is suitable for our application .But we are stuck with this ...Our equipment has a PIC 16c77 MCU.
If you can help regarding the procedures to be followed for having this GPIB interface that will be great!!!
I have some doubts regarding this.
1. How we can use the TNT 488.2 chip in our equipment board.
2. How we can controll this GPIB chip Is it is done by PIC controller?
3. Is above PIC is compatible with TNT 488.2 T/L.
4.Do we need to program the GPIB chip.I know that there is a devoper kit ESP-488 package is there .How we can
develop program for GPIB using this package.
5. Who will help in designing the same
Please help me .
Thanks in advance.
regards
Prasad

9.0.3 Upgrade Moved the Navigation Box from Top to Side How can I Fix this?

In all my previous version of itunes (5+ years worth), I've used the navigation bar on top of the master library list, I'm sure what the official name is, but it opened on top of the library and I could sort my artist, album or genre. I just upgraded to 9.0.3 and now it only shows artists, and is vertical on the left side of the library. Please help! I hate this change and it's throwing me off completely. I just want to go back to the old way.

Hi--
Welcome to the Apple Discussions.
Look at the "View" menu and check out the options in the "Column Browser" submenu. You'll want "On Top". You can also add back your genre column in this submenu.
charlie

Currently using iPhoto 7.1.5 We recently upgraded from Leopard to Snow Leopard with updated Quicktime player. Our videos off our camera no longer open in Quicktime by double clicking. Any help?

We are running iPhoto 7.1.5 '08. After upgrading to Snow Leopard 10.6.8 and Quicktime Player 10.0, our videos off of our camera no longer open by double clicking. Any help?

Thank you for your quick reply. I'll give it a try. Another workaround I figured out last night is to right click the video, click show file, and then double click the file. Quicktime the plays the video.

JRE not upgraded to 1.6_0_X while upgrading our EBS from 12.0.6 to 12.1.1

Hi,
We are in the middle of upgrading our EBS from 12.0.6 to 12.1.1. We have successfully applied patch and upgraded Oracle homes.
I have upgraded JDk and got below output.
$ADJVAPRG -version
java version "1.6.0_20"
Java(TM) SE Runtime Environment (build 1.6.0_20-b02)
But after upgrading JRE - I got the below output.
$ java -version
java version "1.4.2"
gcj (GCC) 3.4.6 20060404 (Red Hat 3.4.6-8)
Please suggest on this.
Regards,

Thanks Hussain,
Please find the below out put for the steps 4.2 & 5.
Step 4
[xxxxx@xxxxxx ~]$ $ADJVAPRG -version
java version "1.6.0_20"
Java(TM) SE Runtime Environment (build 1.6.0_20-b02)
Java HotSpot(TM) Client VM (build 16.3-b01, mixed mode)
[xxxxx@xxxxxx ~]$ echo $CLASSPATH
/d01/oraapps/PROJ_PRD/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/d01/oraapps/PROJ_PRD/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:/d01/oraapps/PROJ_PRD/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/d01/oraapps/PROJ_PRD/apps/apps_st/comn/java/lib/appsborg.zip:/d01/oraapps/PROJ_PRD/apps/tech_st/10.1.2/forms/java:/d01/oraapps/PROJ_PRD/apps/tech_st/10.1.2/forms/java/frmall.jar:/d01/oraapps/PROJ_PRD/apps/tech_st/10.1.2/jlib/ewt3.jar:/d01/oraapps/PROJ_PRD/apps/tech_st/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/d01/oraapps/PROJ_PRD/apps/apps_st/comn/java/classes
[xxxxx@xxxxxx ~]$ $AFJVAPRG -version
java version "1.6.0_20"
Java(TM) SE Runtime Environment (build 1.6.0_20-b02)
Java HotSpot(TM) Client VM (build 16.3-b01, mixed mode)
[xxxxx@xxxxxx ~]$ echo $AF_CLASSPATH
/d01/oraapps/PROJ_PRD/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/d01/oraapps/PROJ_PRD/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:/d01/oraapps/PROJ_PRD/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/d01/oraapps/PROJ_PRD/apps/apps_st/comn/java/lib/appsborg2.zip:/d01/oraapps/PROJ_PRD/apps/apps_st/comn/java/classes
Step : 5
[xxxxx@xxxxxx ~]$ cd $ORACLE_HOME/appsutil/jre/bin
[xxxxx@xxxxxx bin]$ java -version
java version "1.4.2"
gcj (GCC) 3.4.6 20060404 (Red Hat 3.4.6-8)
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Regards,

Up until the ios7 upgrade I could track all our family's devices from my 3GS, now since upgrading on the iPhone 4S and 5 I can't track them as they come up as 'offline'! And inactive on my icloud id added on the devices!! Please advise.

Up until the ios7 upgrade I could track all our family's devices from my 3GS, now since upgrading to ios7 on the iPhone 4S and 5 I can't track them as they come up as 'offline'! And inactive on my icloud id that added on the devices!! Because I. can't upgrade to ios7 on my 3GS is that why, or do I need to do something else on each device?

It's possible that installing iOS7 on the other devices made the setting to the default for "Find My Friends". The default is off/disabled. Thus they are off line.
Double check their settings for that feature.
KOT

Hi. I upgraded our Ipad2 and we have noticed there are several calendar items missing which were there prior to the upgrade. Can I restore historic calendars from itunes/pc or icloud?

Hi
I upgraded our Ipad2 and we have noticed there are several calendar items missing which were there prior to the upgrade. Can I restore historic calendars from itunes/pc or icloud?

Please please help me, if you know how.

Upgraded our system from ECC 6 to 6.04 (EHP4).

Dear All,
We have upgraded our system from ECC 6 to 6.04 (EHP4).
There are many request in old development server which are in local request now .
We want to transport those requests to new development server which is upgraded one.
Can any one let me know is there any standard way of transporting these requests from old Development system (6)to new one(6.04).
Thanks
Anuradha

Hi Sahil,
Looks like latest EHP installer concentrate more on downtime minimize strategy. We have only 3 options available as follows.
1. Standard resource use
2. High resource use
3. Manual selection
Please take a look at below thread. Let's see what other experts comment on this.
/thread/1458520 [original link is broken]
Thanks,
Siva Kumar
Edited by: Siva Kumar Arivinti on Nov 19, 2011 7:57 PM

Upgraded my NB505 mini netbook from win 7 starter to 7 home premium. Then cam & mic stopped working.

I upgraded my NB505 mini netbook from win 7 starter to win 7 home premium. My cam and mic worked fine directly before the upgrade. I tried to reboot, reinstal the drivers, and redownload the app, but nothing worked. When I open the cam app, the blue cam light cuts on, but there is no feed onscreen. It will "take" pics and videos in the sense that it will show a preview of a default pic but not the one taken. These media files are unopenable, because they aren't real. please help!!!

When you upgrade properly, no drivers or utilities are disturbed. And it takes only minutes.
Upgrade to another edition of Windows 7 by using Windows Anytime Upgrade
Always tell which NB505 you have when you post here. There is a label on the bottom.
-Jerry

Problem: Mixed Exchange 2007 / 2013 CAS Servers with wildcard certificates in Europe and non-wildcard Certficate in China

Hi,
we have following problem. We have a mixed multi-domain one-forest AD environment. We also have still a mixed exchange 2007 / 2013 environment. We also have different CAS Servers for 2007 SP3 (RU15) and 2013 (CU8) in europe and one 2007 SP3 (RU15) CAS Server
in China, because of bad connection to Europe. For the Migration to 2013 in Europe we installed a wildcard-certificate *.xyz.com and used the Set-OutlookProvider EXPR -CertPrincipalName msstd:*.xyz.com, so the wildcard certificate is accepted. Everything in
Europe works fine, inside and outside also between exchange 2007 and 2013 (both CAS Server 2013 and 2007 use the same wildcard certificate). But since the change of the Set-OutlookProvider EXPR we are facing problems with our CAS Server in China, because this
server has a different non-wildcard certificate and a different domain name (cas-server.xyz-china.com instead xyz.com). Now we have the problem that this Chinese CAS server the Outlook Anywhere does not work anymore and prompts always for the username. As
I see it is because of the EXPR change. Is it possible to set the the Outlook-Provider EXPR per Cas-Server ? (They also have their own Autodiscover on this front-end server). Because I see that the Outlook-Provider can only be stored forest-wide.
If not the other solution would be to register the chinese cas server in our xyz.com domain and use the same wildcard certificate on this system right ?
Any help would be appreciate….

Yes setting the EXPR value is most likely the cause of your issue. When you set this value you are telling Outlook to only accept connections from connections that have the cert with the subject name you specify here.
Unfortunately, based on my experience I believe this is an organization wide setting and cannot be configured on a CAS by CAS basis (If I'm wrong someone please keep me honest :)).
So the only option would you have is to change all the URLs to be on *.xyz.com domain. There's no need to change the domain the server actually resides on. The other option would be to purchase a UCC Cert with all the names you need and apply
to all your CAS servers and reset the EXPR value.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

Upgrade to Prime 2.0 from LMS 3.2.1

Hello all, and thanks in advance for any help you can offer. Is there an upgrade path from LMS 3.2.1 to Prime Infra 2.0? Or given 2.1 is now available perhaps to 2.1?
My plan of attack at the moment is to download the OVA for the Small deployment, and build out the DB from scratch. But we do have a significant number of devices so I was wondering if some sort of DB import was possible. It appears that I would have to upgrade our current LMS to 4.2 first to do this though, and that is more hassle than its worth if that is in fact the case.
The other question I had is around licensing. We currently have LMS and NCS running in our environment. How can I combine the licensing from each so I can get the same levels on Prime Infra? Both NCS and LMS are under software support if that helps at all.
Please advise, any help would be greatly appreciated.
Jeff

You can't do a direct db import but you can use the dcrcli utility in LMS 3.2 to export a csv file of your devices and credentials.
You can then manipulate it using Excel or such to match the required format in PI 2.x. (That's basically what's done for you if you go the the trouble of upgrading to LMS 4.2 and using the export utility there.)
There are upgrade SKUs available for NCS to PI. Your reseller or Cisco partner can use the Cisco Prime "BOM Builder" (ordering guide available (only to partners) in the partner community) to determine the correct part number to order.

How to redirect CAS servers to a new manager

Hi Guys,
We have deployed some CAS servers into our network and was managed by a 3310 NAM. Due to its limitation we decided to replace this with a 3350 NAM but didn't realize to disconnect the CAS servers to the old 3310 NAM. Now we are having issues redirecting these CAS servers to the new 3350 NAM.
Please let us know how we can deal with it. Thanks in advance

The NAC Servers get their configuration from the NAC Manager at every reboot. If the old NAC Manager is offline and you reboot the NAC Server, can you add the NAC Server to the new NAC Manager?
-Dan Laden

After updating to OS5, my iphone 4 can not send mail using wi fi and 3G.. only 1 or the other. It will not switch servers from using ATT 3G server to then using WiFi

I have called my internet provider, my email server company and AT&T. All my settings are fine and everything was fine before the OS5 upgrade. I can send email using WiFi when I have my email host as the outgoing server and can send email 3G using ATT server only when on 3G. The phone is not switching back and forth servers from wi fi connection to 3G.

Hey there Jachin W.,
It sounds like you are unable to connect to your home Wi-Fi suddenly on 2 different iOS devices. I would be interested to know if the affected phones are able to connect to a different Wi-Fi connection, but barring that I would use the following article to help troubleshoot the devices and the Wi-Fi connection:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
And this section from toward the bottom if needed:
Unable to connect to a Wi-Fi network
Verify that you're attempting to connect to your desired Wi-Fi network.
Make sure you're entering your Wi-Fi password correctly. Passwords may be case sensitive and may contain numbers or special characters.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
Thank you for using Apple Support Communities.
All the best,
Sterling

Exchange 2013 SP 1 + Lync 2013 CAS servers 100% CPU Load.

Hello. Can somebody explain about one issue?
We have Exchange 2013 CU6 + Lync 2013 (5.0.8308.556) integration. After install Exchange SP1 all Client Access Servers begun to consume all CPU time. In process
explorer there are w3wp.exe (MSExchangeServicesAppPool) and lsass.exe (netlogon context). In IIS logs a lot of events about
GET /EWS/Exchange.asmx/s/GetUserPhoto email=[email protected]&size=HR648x648&CorrelationID=<empty>;&cafeReqId=07966a0b-99a4-4f0a-8a38-a8a83264e46c; 443 - 10.10.10.10 OC/15.0.4659.1001+(Microsoft+Lync) - 401 1 2148074254 46
GET /EWS/Exchange.asmx/s/GetUserPhoto email=[email protected]&size=HR648x648&CorrelationID=<empty>;&cafeReqId=c7fb9499-1dc7-48d9-add6-64156a910de6; 443 Contoso\username 10.10.10.10 OC/15.0.4659.1001+(Microsoft+Lync) - 200 0 0 437
IIS logs are grow up very quickly, about 1GB per day. Before to installing SP1 was not problems. Thanks in advance.

Hi,
From your description, you said that you have Exchange 2013 CU6 + Lync 2013 (5.0.8308.556) integration, then you install Exchange 2013 SP1 on all CAS servers.
Do you mean your Exchange 2013 Mailbox server is CU6, and all CAS servers are SP1?
We had better have the same version on Exchange servers in our environment, if that is the case, please upgrate all to CU6, Exchange 2013 latest version, to check result.
Best regards,
Belinda Ma
TechNet Community Support

I upgraded our CAM/CAS servers from 4.8.2 to 4.9.0 this weekend

Similar Messages

Maybe you are looking for