I upgraded to 10.6.8 and since then can't print
I upgraded to 10.6.8 and since then get the error message library/printers/ EPSON/Inkjetprinter2/ filter./rasyertoescpll.app/Contents/MacOS/rastertoescpll failed. I've renewed the permissions, reset installed printers, reinstalled the printer driver, still won't work. HELP!!....
I upgraded to 10.6.8 and since then get the error message library/printers/ EPSON/Inkjetprinter2/ filter./rasyertoescpll.app/Contents/MacOS/rastertoescpll failed. I've renewed the permissions, reset installed printers, reinstalled the printer driver, still won't work. HELP!!....
Similar Messages
-
I am running XP SP2 fully patched. I recently upgraded to 3.6.3 and since then, clicking on an icon that normally would open another windows (for example, a printer-friendly version of the current web page), nothing happens. In these situations, I have been forced to go to IE or Crome in order to accomplish what I need to do. Very frustrating. Also clicking in the slider area has no effect. "Page Up" and "Page Down" keys work. Holding down left mouse button on slider works. Also very frustrating. Can someone help
== This happened ==
A few times a week
== Upgraded to 3.6.3.Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
Hi,I changed my fios router and since then my c4580 printer is offline.Please help.
Router brand Actiontec and model # 20.10.7.5Hi and welcome to the forums!
Here is the Verizon BIS (Blackberry Internet Service) website and procedures.
Thanks,
Bifocals
https://bis.na.blackberry.com/html?brand=vzw
http://www.blackberry.com/knowledgecenterpublic/livelink.exe/fetch/2000/8067/645045/788117/1166305/1...
Message Edited by Bifocals on 01-11-2009 01:00 AM
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure. -
Is Firefox 4.0 compatible with Zorap (video chat)? I have used it perfectly with Firefox 3, but since I d/loaded 4.0 I am unable to use the program. Is there an option that I must adjust? Would appreciatre your help.
Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com -
I upgraded my iMac to Yosemite and now I can't print on my Kodak ESP 5250, any ideas?
I downloaded Yosemite to my iMac and I can no longer print to my Kodak ESP 5250. I didn't upgrade my MacBook Air and it still prints fine. Will there be any drivers to fix this problem or can I downgrade back to Mavericks until I get a new printer?
Kodak has posted an unsupported hack that has been reported to enable printing to a Kodak printer not supported in OS X 10.10 ("Yosemite").
I have not tested the hack myself and I don't know all the possible effects. As far as I know it will not break the compatibility of printing software that is already compatible with Yosemite. It may degrade the security of the web administration interface of CUPS. That interface is not enabled by default, and will not be enabled by the procedure described here. Even if it were enabled, I know of no way it could be exploited, with or without the modification. Nevertheless, if you have enabled the web administration interface, you should disable it if you decide to follow these instructions. If you don't know what the web administration interface is, you haven't enabled it. -
I received an automatic upgrade for my Mac Air and since then I have not been able to use my upper left back button. How can this be fixed. I don't want to go back to History to get back to the page I had been using.
Make an appointment at the genius bar and get the phone replaced.
-
I have an iphone 3GS and I have upgraded it to iOS 6. Since then it doesn't work properly.
Every now and then it has been restarting by itself and requiring restore. When I connect it to itunes it restarts again and again without letting me take any action. Is there any solution?Hey, There are afew things you can try.
- Simply turn your phone off and back on again
- Hold down your home button and your lock button and let goes as soon as the screen goes black (Phone will power down) - Then turn on your phone and hey presto!
- Back up your iPhone to your PC, then restore it..
this ones last cause I think you may have tried it already..
- Close all open applications
Hope this helps!
Kieran. -
can someone assist me with a solution to the problem with my iphone 5. I upgraded to IOS 6.1.4 and since then i have had the problem of No Sim. I restored to the factory settings using i tunes as i have my back up on my pc but still the same problem. I have swapped sim and my Sim is working on other iphone with ios 6.1.3
Try a new SIM from your carrier. If that doesn't work, make a Genius Bar appointment and get your phone evaluated.
-
I just upgraded to OSX version 10.8.3 and since then all animations are defective.
The dock is jerky!
The effects of opening and closing windows ranging in shots!
What should I do?You can check the status of your drive's indexing by clicking the Spotlight menu to see if there is a progress bar at the bottom of it, and can also open Activity Monitor and click the "%CPU" column to sort by CPU usage, to see if the processes "mds" or "mdworker" are currently active and using your CPU.
If so, then wait for them to finish. However, if not then try rebooting and then hold the Shift key immediately after you hear the boot chimes. This will load the system into Safe Mode, which should run some checks and maintenance routines on the system. Then reboot normally to see if the problem persists.
How much RAM do you have installed on your system? You can see this by choosing About This Mac from the Apple menu. -
ipad is disabled. We upgraded to iphone 5 and IOS7 and since then ipad is asking for a passcode which we did not have before. Now disabled!
ipad is disabled. We upgraded to iphone 5 and IOS7 and since then ipad is asking for a passcode which we did not have before. Now disabled!
-
"apple mobile device failed to start" "verify that you have sufficient privileges to start system services" came up on windows XP upgrade to 11.1.4 and since have been unable to open itunes - uninstalled and tried reinstall to no avail - what to do ? Ken
I am having this same problem. I took Kappy advice on restarting the Apple Mobile Device Service, however that did not work. I got this message in a pop up window that came up immediately.
Windows could not start the Apple Mobil Device Service on local computer.
Error 1053 The service did not respond to the start or control request in a timely fashion.
I have already uninstalled itunes, all the related programs and I cannot reinstall, this Apple Mobil Device message stops the install.
Can anyone please help? -
I upgraded my iphone 4s to ios 6.0.1 2 days ago and since then it has been overheated! is ios 6.0.1 not meant for iphone 4s? how can i solve the isssue?
Hi Dan,
I tried to reset settings but it didn't seem to help much. Then I read a few posts about deleting my email accounts and recreating them, and that actually seemed to help a bit. Now the only time I notice it gets heated up is when I am either on whatsapp or Instagram...that's it! -
upgraded my macbook pro 2012 to osx mavericks and since then I'm having troubles like: can't open mail or maps. recently if I'm trying to fill a info box from a web site safari stops working.
Try backing up your data and upgrading to 10.9.2.
-
I just downloaded the latest iOS.7 upgrade on my ipad2, and since I can not connect to the internet using my cellular data plan. I have checked my data plan and it's both current and over 2GB remaining. However the indicator shows no service, thus would be the best steps to recover. Thanks much for any support that can be provided.
Hello Kmart2@3
Check out the troubleshooting article below to get cellular to start working again.
iPad (Wi-Fi + Cellular Models): Troubleshooting a cellular data connection
http://support.apple.com/kb/TS4249
Regards,
-Norm G. -
I was trying to upgrade to OSX 10.9 but during the upgrade when the download got to 2.6gb /5.29gb message "an error occurred" appeared and since then i have been un able to upgrade, what can i do.
If you purchased Lion for your iMac, just log into the Mac App Store from your MacBook using the Apple ID under which you purchased Lion and go to the Purchases page. You will be able to download and install Lion there.
searching the internet i found a link to upgrtade to 10.7
The only place you get get Lion is from the Mac App Store. If you found some other site, that was an illegal copy and almost certainly tied to someone else's Apple ID and hence unusable by you. If the link was just to the Mac App Store, see above.
As to the problem with synchronization to iCloud, that's not a 10.6 question, so I'd suggest you take up that specific issue in either the Lion or iCloud forums, providing full details, and someone there can probably help you sort things out.
Regards.
Maybe you are looking for
-
Help needed installing Adobe Photoshop Elements 12.
I am on a deadline and need to install. I currenly do not have a working DVD player. How do I install this software?
-
How to parse a XML file where tags have a underscore in them
Hi, As per my current requirement I have a XML file where the tag names ( tags ) have a underscore in them like <root> <name_get>100<name_get> <name_set>200<name_set> </root? Can any let me know the following 1) Can I read /parse such a XML
-
What happened to my Finder?
I do not know if it is related but I recenlty updated my Lion OS with the new iCloud.. Everything I had on my desktop is visibly gone, everything in my Finder is gone... Talk about frustrating! they are not completely gone becuase I can search one of
-
I recently updated both my iPhone and iPad to ios6 but since doing this I can no longer send or receive e-mails. I get the following message:- the mail server is not responding , verify that you have entered the correct account info in Mail setting -
-
Displaying current user's first and last name on a report.
I would like to dispay the current user's name on a report. I've tried using User() and NQ_SESSION current user . These two options display the User ID (i.e. User name is Jon Smith. there ID is COMP/JSMITH. Using the two methods above the ID (COMP/JS