I upgraded to 4RC and now I can't connect to the internet at all.

I deleted Firefox, and now even with IE, it won't connect. With Firefox, it was saying something about the proxy settings, now with IE, it says the remote device or resource won't accept the connection. Please help!!

You can find the connection settings in Tools > Options > Advanced : Network : Connection
If you do not need to use a proxy to connect to internet then select "No Proxy"
See "Firefox connection settings":
* [[Firefox cannot load websites but other programs can]]

Similar Messages

  • I put the BT WiFi app on my iPad Mini and now I can't connect to the internet.  Please help

    I put the Bt WiFi app on my iPad Mini  and now I can't connect to the internet.  Please Help

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I've just upgraded to Lion and now iTunes can't connect to the iTunes store.....??

    I've repaired Keychain, re-installed iTunes and it still won't work.....
    Please help.
    Jeremy

    You can find the connection settings in Tools > Options > Advanced : Network : Connection
    If you do not need to use a proxy to connect to internet then select "No Proxy"
    See "Firefox connection settings":
    * [[Firefox cannot load websites but other programs can]]

  • Upgrade ip5 to ios6.0.2 and now I can't connect to the network (was fine with 6.0.1).

    I just upgraded my ip5 to ios6.0.2 and now I can't connect to the network (was fine with 6.0.1). I bought the phone  online in Canada but have a Hong Kong simcard. Any solution to connect to network?

    I bought mine in the US and activated using a German SIM.  It worked fine first on 6.0.1.  After upgrading to 6.0.2 the SIM does not work.  I have reset the reset the phone and still does not work. I loaded a new SIM and the phone worked for few minutes before going to Searching mode after I restarted the device.  I am being told by the Genius Bar team that this is a Hardware failure.

  • I just downloaded the latest OS upgrade and since I can not connect to the internet using my cellular data plan.

    I just downloaded the latest iOS.7 upgrade on my ipad2, and since I can not connect to the internet using my cellular data plan.  I have checked my data plan and it's both current and over 2GB remaining.  However the indicator shows no service, thus would be the best steps to recover.  Thanks much for any support that can be provided.

    Hello Kmart2@3
    Check out the troubleshooting article below to get cellular to start working again. 
    iPad (Wi-Fi + Cellular Models): Troubleshooting a cellular data connection
    http://support.apple.com/kb/TS4249
    Regards,
    -Norm G.

  • I downloaded the new iOS6 and now I can not connect with the iTune or App stores. My wi-fi works.

    I downloaded the new iOS6 update to my 4s and now I can not connect with the iTune or App store. How do I fix it? My Wi-Fi works fine.

    (A) Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.
    (B) Reset all settings
    Settings>General>Reset>Reset all settings
    Note: Data will not be affected but settings will be reset.

  • Just updated to the new beta 3 version, now I can't get on the internet at all, I am using my girlfriends computer to send this

    just updated to the new beta 3 version, now I can't get on the internet at all, I am using my girlfriends computer to send this to you. Just gives me a blank tab and WILL NOT DO ANYTGHING!!!

    Try to create a new profile as a test to check if your current profile is causing the problems.
    See "Basic Troubleshooting: Make a new profile":
    *https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
    If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
    See:
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls

  • I updated a program on my mac and now safari doesn't connect to the internet but outlook mail is working - help

    I updated a program on my Mac Book Pro and now Safari doesn't connect to the internet but Outlook and my mail does.
    I have shut the compluter down completely but I still have the problem.
    Any sugestions out there?

    I suggest you download and install EtreCheck from http://etresoft.com/etrecheck
    Run EtreCheck and publish report here.
    This will give us a complete report on her Mac and allow us to help you.
    Allan

  • HT202157 I updated my apple tv and now it will not connect to the internet

    please HELP me make my appple tv work again. I have done the most recient update on it and now it will not connect to the internet :/

        1.    First you should try logging out of your iTunes Store account (settings > iTunes Store > accounts) and then back in again.
        2.    If that doesn't help, try resetting the Apple TV (Settings > General > Reset > Reset all settings).You should also try restarting your router.
        3.    If both of the above don't help, you should try a restore (Settings > General > Reset > Restore).

  • I upgraded to IOS7 and  now I can't get past the icloud terms and conditions page.  I press agree and the box pops up however I can't click on agree or disagree.  Please help

    i upgraded to IOS 7.0.2 on my ipad and now I can't get past the terms and conditions page to finish the setup.  I click agree and then a small box appears to click agree again and I can't choose agree or disagree.  I just need my ipad to work...  help

    Reset iPad and continue with update
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • I reset my ipad 2 and now it won't connect to the internet

    I reset my ipad and now it won't connect to the internet

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Moved AirPort Extreme and now it won't connect to the internet

    I have moved my base station on previous occassions with no problems--plug and play if you will.
    I just moved it to a new location and while the computers in the house recognize the wireless network with no problems, the base station no longer successfully connects to the internet.
    I have plugged my MacBook Pro directly to my cable modem and confirmed that the internet still works perfectly well to the house. Plugging that same cable into the base station does not bring the internet up.
    I've used the AirPort Utility to act like I'm starting from scratch.
    I've chosen Manual configuration and replicated all the data from the MacBook's succesful hookup with no success.
    I have manually reset the base station and tried the above again, no success.
    Any other ideas? It seems too coincidental to me that there could be an actual hardware issue (everything was perfect right before I moved it (I know, I know--that begs the question, why'd you move it? I should say everything was good, except for one room in the house received a weak signal, so I wanted it to be more centrally located)) that arose just as I moved it. My guess is I just need a little tweak to a setting or something but I can't say I understand what all this DHCP stuff is about.
    Thanks for your help!

    Most cable modems require that you power them off whenever you switch the Ethernet connection from one device to another. The cable modem will refuse to communicate with the new device if you do not do this.
    Did you power off/on the cable modem when you switched the connection from the MacBook Pro to the AirPort Extreme base station (AEBS)?
    Some cable modems have a reset switch for this task.
    Some cable modems have an internal battery which must be removed to do this reset.
    Sometimes the cable modem must be left turned off for several hours or even overnight to reset equipment back at the ISP's office.

  • I downloaded an update and now Firefox does not connect to the Internet. Having downloaded it again and again without avail, what do I do?

    Firefox has gone haywire and won't connect to the Internet. I was prompted to install one of your updates and I did. Afterwards, it would no longer connect. I uninstalled and reinstalled it several times, but still I cannot connect to the Internet. My OS is Windows 7

    After a Firefox upgrade/update, your firewall may not recognize that new version and will not allow access to the internet; that is your firewall doing its job. You may need to
    #close Firefox (Firefox button > Exit or File > Exit)
    #remove permissions for Firefox from your firewall's programs list
    #restart Firefox
    #allow your firewall to detect the new version and give the permissions needed by your firewall for Firefox to access the internet.
    See --> [http://support.mozilla.com/en-US/kb/Cannot+connect+after+upgrading+Firefox Cannot connect after upgrading Firefox]<br />
    See --> [https://support.mozilla.com/en-US/kb/Firewalls#w_configuring-firewalls Firewalls-Configuring firewalls]
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

  • All of our iOS devices are displaying the message that they can't connect to the Internet.  All show good wifi connections.  Our Macs all connect to the internet just fine suggesting that the network is good.  I'm stumped.

    Airport Utility on the Macs show good internet signals but on our two iPads and my iPhone 5 there are no indications of internet connectivity.  One of the iPads is running iOS 7 but the other is still running iOS 6.  The iPhone 5 is updated to iOS 7. 
    Is there a setting switch that if set incorrectly would create this problem?  Like I said before, all the iOS devices stopped internet connectivity at the same time. 
    Update:  Well while I was typing this I was called away to help get people to bed etc.  And when I got back I tried all four iOS devices and, now, they all connect to the internet.  I don't understand it.  Two iPhones, different iOS versions, and two iPads, different generations and also different iOS versions, all decided that they would disconnect themselves from the internet but stay connected to the wifi network.  Somebody must have an explanation for what just happened.  Remember it isn't the router because the Macs all had uninterrupted internet connections.  Weird!

    I used to have a satellite connection to the internet. When ever the power went off I was told to turn on the devices in a specific order for them to work properly.
    Try shutting off every device including all iPads, iPhones, computer, Wi-Fi router and Satellite modem. Then turn them on one at a time in the order listed below. Be sure to wait until each device completes its start up routine before starting up the next item. When my satellite modem was restarted it often had to download an update. The time this took varied with the update. So be sure the Satellite modem is up and connected to the Satellite before going to the next device.
    1. Satellite Modem.
    2. Wi-Fi Router
    3. Your computer. Check to see that your computer connects to the internet.
    4. iPad or iPhone and remaining devices one at a time.

  • Can't connect to the internet at all

    I recieved an email today stating that my phone line and broadband service has been activated at 3:30am this morning. My home hub arrived today, and upon trying to connect I am greeted with a orange light, and a flashing red one on the router. Has my line been activated? Because I live above a club and worry that BT may have activated the internet for the phone line downstairs, not upstairs.

    According to this, you have to wait until tomorrow http://btsupport.custhelp.com/ci/fattach/get/3445634/1386322208/redirect/1
    If you found this post helpful, please click on the star on the left
    If not, I'll try again

Maybe you are looking for

  • Time issue on MacBook Pro

    Hi, I've had a problem with my mac for some time. Whenever I open or modify a file, the time shown is incorrect. The date is always correct, but the time shows 7:08pm for everything. The same occurs in Time Machine backups, iCal events and email from

  • Can i connect an iPad to an Epson workforce 645?

    Can I connect a iPad to an Epson WorkForce 645?  If so, what online OS choice do I select, I do not see iOS as an option.  Also, how can I find what iOS version I am on?  Thanks

  • [Solved]Pacman fails to connect to server in Arch Virtual Machine

    Hi I've just installed arch 2008.06 in VMWare Workstation 6.04 on Vista Business x64. The setup all went fine and i am now logged into my system, but Pacman refuses to connect to anything. i have tried Bridged networking and NAT to no avail. whenever

  • Sapscript output to pdf of standard program .

    Hi , Any ideas on how we can save the output of a standard sap script eg purchase order QM notifications etc onto local disc as pdf file .As it is standard we cannot change the open_form structure ..

  • Could not initialize Photoshop because of a program error" with PS CC 2014

    I get "Could not initialize Photoshop because of a program error" with PS CC 2014 on a 2099 Macbook Pro running Mavericks. Then the program closes. Can anyone help?