I upgraded to Fiber Optic today and now my ipad mini won't connect to the internet although it shows a signal
As the title says, we changed to fiber optics today (yay! so speedy) and all our devices (Macbooks, iphones) connect just fine. My ipad mini (about 1 year old) won't connect although it finds the network on the airport effertlessly and shows full signal bars as if it is connected. For all intents and purposes it looks like it is connected, but it isn't. I have done all the usual - turned on and off (router and device), forgotten network, renewed network lease, reset network settings, reset all settings, etc. Everthing! Still not working. Help please!!!!!!
Hello Tom,
So this is the Airport Forum. Hence when you were discussing your "Airport", one assumes you are referring to the Airport Extreme or Airport Express (ie - http://www.apple.com/airport-extreme/ or http://www.apple.com/airport-express/). It is slightly confusing when Apple refers to the Airport being the wireless in devices as well as their wireless routers.
It would help us if you told us what type of connection, for instance I live in the UK and have Fibre Optic (to cabinet) and have a cable modem from Virgin Media, which I have then connected (via ethernet) an Apple Airport Extreme (6th Gen) to distribute the internet connection and my local LAN.
Maybe you had ADSL prior and are now on Fibre via cable?
Similar Messages
-
I changed to Time Warner cable. Upon doing so, my Airport Express lost its connection to the Internet. When I run the Airport Utility, I am stuck at the first step, which says the AE doesn't have any DNS server addresses. What are they and how do I find out what they should be? And if I supply them, will that fix the problem?
Have you performed a Factory Default Reset on the AirPort Express?
If not, the Express is still remembering the settings that you programmed into it when you configured it to work with your old modem.
The Express is "looking" for your old modem, but it does not "see" 'it because it is no longer there...so it can't connect to the Internet.
If you have not already tried the Factory Default Reset and you need more info about this, post back for more details. -
I upgraded to 10.9.2 and now my Canon MX870 won't print. Their driver site only listed drivers for 10.6. How do I make this work?
I just looked at the Canon site and it has Mavericks drivers.
http://www.usa.canon.com/cusa/macosx_lion/multifunction_printers/pixma_mx_series /pixma_mx870?selectedName=DriversAndSoftware -
HT2486 I just upgraded to 10.6.3 and now my address book won't work (4.1.2) how to I upgrade it?
I just upgraded to 10.6.3 and now my address book won't work (4.1.2) how to I upgrade it?
Software Update (under the Apple menu).
Current Snow Leopard version is 10.6.8. -
I downloaded the latest version of itunes and now my ipod nano won't sync. The sync process appears to lock up on the 2nd song and will not continue to sync. I let it run all night the first time and it never went past the 2nd song. I unchecked the 2nd song so a different song would be 2nd, no benefit; reset my ipod nano; shut down laptop and restarted a different time; shorted the number of songs to sync; all without benefit.
When you connect your ipod up to the computer. It should show the device, usually with the name of the device, in my case 'jordan's ipod'. This should be on the row which shows 'songs', 'albums' e.t.c on the far right. There when you click on it it should go to a different screen showing a picture of your ipod along with two buttons - Update and Restore. Click update and it should take a 2 mins while your ipod is updated to the latest version of Ios.
After updating te ipod see if there is a change in results.
PS: make sure the device is active while syncing so keep tapping the screen.
Sorry for any incorrect info, i have an ipod touch, but i've had experience with an ipod -
My wifi was disconnected and turned back on. Now my phone either won't connect to the wifi or connects but doesn't work
Reset network settings.
Settings > General > Reset > Reset Network settings.
Then re-connect to WifI by setting it up again. -
I have recently changed my bt home hub and now my airport express won't connect to it? Any suggestions?
Anytime you change out a modem or modem router like the HomeHub, the AirPort Express needs to be reset back to factory default settings and then set up again.
The reason for this is that the Express is retaining some or all of the settings to connect to your "old" modem or hub, so it will not work correctly with a new device unless you start over again from factory default settings on the Express.
Power up the Express for a few minutes
Hold in the reset button on the side of the Exprsss for 8-10 seconds, then release and allow a full minute for the Express to restart to a slow, blinking amber light
Now, set up the Express again, like you did originally with the "old" modem or hub that you had previously. -
I updated my airport firmware and my Imac works fine, but my two Ipads won't connect to the internet now. How can I fix this?
Did you check your wifi settings and do a reboot?
-
My ipad 2 will not connect to the internet I've tried to manually enter it but its not recognising it or finding any connections. I've reset it to factory settings twice and its not clearing it. Does anyone have any ideas??
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
i connect my iphone to my pc and i tunes open automatically,then i press dowload and update but itunes say am not connected to the internet while my pc is connected to the internet what isi the problem?
If you are the only user on your computer you probably don't have multiple user accounts set up and can disregard that. If you are using iTunes 11 go to View>Show Sidebar. Now see if your iPad appears under Devices on the left side when you connect it. If it does, click on the name of your iPad on the left side and your iTunes sync settings options will appear in folders with tabbed headings to the right.
If it doesn't appear on the left side, follow the troubleshooting steps shown in this article: http://support.apple.com/kb/TS1538. -
My 1st Generation time capsule won't connect to the internet thru a new motorola sb6121 - get continuously flashing yellow light. Using a router in between the modem and capsule yields good but slower connection to internet. Any thoughts?
Thanks for your response
Let me give the history - I started with an Apple Express being fed thru a D-Link EBTR 2310 cable Router from an RCA DCM315 Modem (Pure). Comcast service all the way.
Got the 1st generation TC in 2008 and merely replaced the Airport Express with the TC. Worked ok
A year or two ago I did try removing the modem and feeding the TC directly from the modem. Resulted in the same condition I have now - Continuous flashing amber on the TC. So I put the router back in the chain.
Some time later, at the recommendation of a Comcast rep, I replaced the router with (a Belkin F5D 5231) to see if speed and dropout problems would be improved. I thought it helped some at the time but now I am not so sure.
Last week I decided to see if a new modem would help with download speeds. So I got another pure cable modem (Motorola SB 6121- high on the Comcast recommended list).
Got up and running easily with Comcast help and with the modem connected directly to a computer.
Next I put the TC in the link and again could not get past the TC continuing to flash amber. Although I did get connected to the internet with this configuration I lost connection two both of my printers - one connected by USB and the other wirelessly to the TC. Again everything works fine when I put the Belkin router back in the system.
However with the router in there, the modem shows the downstream connection to be 10/100 ethernet speed. (Modem light changes color for indicating speeds.}
I have gone thru all of the combinations of powering down/ up, but all stays the same.
I can live with what I have but something still doesn’t seem right.
Thanks again -
My mac air OSX10.8.5 won't connect to the internet. It says it has a 'self assigned IP address and therefore cannot connect to the internet'. Network diagnostics is unable to the solve the problem. It happened suddenly for no reason and now I cannot connect except by typing in the configuration settings manually. Please help me!
Use the Airport Utility or log into your wireless device via http and ensure the DHCP/NAT service is enabled. If accessing via HTTP, you will need to manually set an ip within your local subnet (eg: 192.168.0.x).
-
My iPhone 5c won't connect to the internet so now I can't download iOS 8
My iPhone 5c won't connect to the internet so now I can't download iOS 8
Connect the device to the computer and iTunes and update that way. Why won't the phone connect to the Internet?
-
We recently switched ISPs. To connect to the new ISP our Airport Extreme has to be in bridge mode. Now our Nintendo Wii won't connect to the Airport. Is it an issue with bridge mode that is causing this? We're running two Macs wirelessly with no problems. And the Wii did connect before the switch.
Hello and thanks for the reply. I gave this a try, turned off Airport on one of the computers and tried the Wii again. Still no connection. I should say that we're also running an old G4 (wired) off the Airport as well, with no problems. I've tried many things to make the Wii to work, including power cycling the Airport, turning off the security settings in the Airport, resetting the Airport to it's default and redoing the network, resetting the network setting on the Wii (several times), moved the Airport closer to the Wii, all with no luck. The Wii "sees" the Airport but won't connect to it. I'm at a loss for anything else to try, so any help is appreciated.
-
I just downloaded the new software to my iPad but now it won't connect to the Internet. How can I fix this?
Have you tried to reboot your router? Unplug it, count to 30, plug it back in and let it reboot. Also you may want to go into your settings on your iPad and 'reset network settings'.
In case the update messed something up, letting the devices reboot sometimes helps.
Maybe you are looking for
-
Change Documents for Material Classification data Changes
Dear Friends, We have configured custom classification objects for material master and also we are able to maintain the material characteristics using MM01, MM02 and also using ALE interface. But I am not able to find the Change Documents in any of t
-
When I try to log in bios as Administrator I getting the error message "System Disabled Key: 57811531" Can someone help me? This question was solved. View Solution.
-
After install the lion ، the computer it's became slow
hi After install the lion ، the computer became slow , i don't know why . my macbook Pro Core I7 4GB ram and Adobe photoshop cs5 very very very slow i can't work with it please Help Me , My job depends on Photoshop i thinking to back the snow leopar
-
HO w to use SAX parser to create an XML file on the fly
Hi All, Currently I am using the DOM parser to create an XML file from a text file. But as the DOM takes much memory and inefficient, I need to convert the DOM translator to SAX translator. Can I do that ?? If YES then how to go about that and if NO
-
Where do i go to have ipod repaired...
i need a lot of help. I need to know where i can go to have my ipod 5th generation 30 gb repaired. It would be nice if it wouldn't cost too much. If it is unavoidable to pay, then thats fine with me then. The problem is that the LCD screen is cracked