I upgraded to firefox 4 (from 3.x) and since then I can't scroll using the trackpoint on my IBM R40 laptop. It does work in other applications including foldres, explorere etc.
It worked until I downloaded the last version of firefox, and it still works with any other application except ff.
Apparently it's related to the Firefox plug in.
This isn't exactly a solution but more of a way to avoid opening PDFs with Firefox's plug in.
1. Highlight "Tools" from the Menu Bar in the top left of the screen (or click "Options" if using the Firefox Compact Menu)
2. Select to "Options
3. Select "Applications"
4. Look for "Adobe Acrobat Document" under Content Type and to the right under Action select "Use Adobe Reader (default)" instead of the using Adobe Acrobat in Firefox
5. Open a test PDF. It should open in it's own window now.
Again, not a complete solution but something that'll at least let you scroll with PDFs open.
More info here: http://forums.mozillazine.org/viewtopic.php?f=38&t=2171033
Similar Messages
-
there was an error importing some photos from my iphone, and since then I can not close the program ... it gives the mesage 'please wait until import is conclued'...but nothing is being tranfered. Any help ? Iphoto version 9.5.1
Force Quit the application from the Apple menu.
-
can someone assist me with a solution to the problem with my iphone 5. I upgraded to IOS 6.1.4 and since then i have had the problem of No Sim. I restored to the factory settings using i tunes as i have my back up on my pc but still the same problem. I have swapped sim and my Sim is working on other iphone with ios 6.1.3
Try a new SIM from your carrier. If that doesn't work, make a Genius Bar appointment and get your phone evaluated.
-
I just upgraded to OSX version 10.8.3 and since then all animations are defective.
The dock is jerky!
The effects of opening and closing windows ranging in shots!
What should I do?You can check the status of your drive's indexing by clicking the Spotlight menu to see if there is a progress bar at the bottom of it, and can also open Activity Monitor and click the "%CPU" column to sort by CPU usage, to see if the processes "mds" or "mdworker" are currently active and using your CPU.
If so, then wait for them to finish. However, if not then try rebooting and then hold the Shift key immediately after you hear the boot chimes. This will load the system into Safe Mode, which should run some checks and maintenance routines on the system. Then reboot normally to see if the problem persists.
How much RAM do you have installed on your system? You can see this by choosing About This Mac from the Apple menu. -
I've upgraded my imac to mountain lion and since then I havetroubles with my networkconnection
Please carefully read iMac SMC and PRAM reset for correct instructions on how to reset the SMC, do this 2x back to back.
-
I updated my iTunes to 11.3.0.54 yesterday and since then iTunes can't recognize my iPhone 4s and even an iPod
what to do?Hello,
Only option is upgrading your Mac's OSX, since Apple will not allow iOS to go backwards.
Snow Leopard/10.6.x Requirements...
General requirements
* Mac computer with an Intel processor
* 1GB of memory (I say 4GB at least, more if you can afford it)
* 5GB of available disk space (I say 30GB at least)
* DVD drive for installation
* Some features require a compatible Internet service provider; fees may apply.
* Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
Call Apple Sales...in the US: 1-800-MY-APPLE. Or Support... 1-800-275-2273
Other countries...
http://support.apple.com/kb/HE57
It looks like they might still have it...
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA -
I have an epson T50 shared network, which is connected to a computer that runs on Windows 7 64-bit. The 10 days Apple has updated the printer drive and since then has been trying to print the following message: / Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS/ rastertoescpII failed.
What should I do?The first thing you should do is re-write your post to make it a bit more understandable. I got you have an Epson printer connected to your PC, however after that your post doesn't make any sense. Are you attempting to print from your iMac, if so then you need to download and install Bonjour for Windows on your Windows machine. Then set Windows so it has printer sharing turned on and then on the iMac simply follow Apple's instructions for adding a printer.
http://support.apple.com/kb/DL999
http://support.apple.com/kb/HT4670 -
my macbook pro was repaired and since then i can't get nor photoshop cs5 or bridge cs5 to initialize. a window appears that says it has initializing problems due to an icc profile issue.
there appear two error messages. the first one says that there has been a problem sincronizing because of a programme error. the second one appears after you clicked ok on the first window and says that photoshop couldn't be initialized because the icc profile is invalid.
does anyone know if i have to delete any system or photoshop preference? the illustrator is also having troubles. thanksthanks! what finnally worked better was renaming the «settings» folder in te «color folder» in the library with ~before the name. now indesign is asking me for thw icc profiles but still works, so i asume i can reinstall color settings only for indesign and go on.
-
I just installed virusbarrier x6 and since then i can't surf on internet anymore . Wharf is thé problem ?
Thanks à lot for helping meI tried actually to remove virus barrier but I failed. What is the way to Throw it away?
Follow the instructions here > http://oit.ncsu.edu/antivirus/uninstall-intego-virusbarrier
Use ClamXav
It's free and Lion v10.7 compatible.
ASC search results for Virus Barrier here. More negative than positive.
Good article to read > Thomas' Corner : Mac Virus Guide -
My iphone3gs has died, it just started to vibrate and carried on for several minutes, then just stopped . Now I cant switch it on or off I just have a black screen It was fully charged when it happened and since then I have tried holding down the sleep bu
iOS: Unable to update or restore
-
I just recently upgraded to Firefox 5.0.1 and now the "lock" icon doesn't appear anywhere (I can find) when accessing secure websites. I haven't seen it once. It used to appear in the lower right corner of the screen. I also have Norton Internet Security.
Padlock is no longer part of Firefox; it was removed beginning in Firefox 4. The padlock shows that there is a secure connection but does not supply additional information. You could have made a typographical error and still have been connected to a secure connection. The padlock was replaced in Firefox 3 with the Site Identity Button. Familiarize yourself with the Site Identity Button at the left end of the Location Bar:
*https://www.mozilla.com/en-US/firefox/security/identity/
*https://support.mozilla.com/en-US/kb/Site+Identity+Button
*http://www.dria.org/wordpress/archives/2008/05/06/635/
You can install this add-on if you wish: *https://addons.mozilla.org/en-US/firefox/addon/padlock-icon/
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox] -
FireFox automatically upgraded today. When I try to launche it, it only loads about half the page. (I use Google as my home page) It just gets stuck there. I try to close out the page and I get "this program is not responding". I can launche Internet Explorer with no problem, (I much prefer using FF, but if I can't get into it...) so it has to be something with FireFox. FF freezes, so I end up having to shut of my computer AT the computer, because it won't shut off at the desktop monitor. Windows asks me to send a report and I have. I don't know if it has anything to do with it, but my Norton antivirus prevented a plugin from happening...I don't really understand it all...
I just tried to open my home page again and got the message way up at the top of the page " Mozilla FireFox (not responding)See:
* http://kb.mozillazine.org/Browser_will_not_start_up
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
Create a new profile as a test to check if your current profile is causing the problems.<br />
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)<br />
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
With each upgrade of Firefox, I have a harder and harder time, getting to the links provided in my emails. Some times I am able to trick the link into working, if I continue to to try every link in the email, but most of the time, I just have to give up. I know that I need to change something, maybe in the settings, but I don't know what.
Please help me. I am considering just going back to Internet Explorer.This did not solve my problem. I can sometimes click on a link (word) provided in an email, that leads to a site, but it does not list the website address!! It works sometimes, providing me with a chance to enable links for this address or enable link (I think basically for just that one time).
-
Firefox crashed and since then I can't open it, not even after reinstallation
My computer had an unexpected shutdown. At that time, Mozilla was open and working with no problems. After the shutdown I restarted the computer but Mozilla wouldn't open. Simply after clicking the icon (in Startuo programs r any shortcut) nothing happens. I tried to uninstall it with Windows Uninstaller whowever I didn't manage - I kept receiving the message to close the program before uninstalling. So I used an external uninstaller with which I managed to uninstall the program and installed it all over again however this didn't solve the problem- I still cannot open it. Can you advise me some solution?
See:
* http://kb.mozillazine.org/Browser_will_not_start_up
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
Create a new profile as a test to check if your current profile is causing the problems.<br />
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)<br />
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
i chage my internet provider and therefore email address. i deleted my old email address from my ipad and now i am not able to email from new email address nor will i cloud recongnize my new email address which is my apple id now. since i deleted my old email acct the cloud is not allowing me to chg this address in settting. the cloud still has my old email address listed.
See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...
Maybe you are looking for
-
Call stored procedure in Visual Basic 6.0 and datatype CLOB
Hi Has somebody a Visual Basic 6.0 Sample Code which can call the following example procedure. test_package.getTestdata( pPeid IN NUMBER, pReturn OUT NUMBER, pData OUT CLOB Many Thanks in advance. Best regards Martin
-
Need to Activate field in FF68
Dear Experts, We need to activate the field Bank account number(BNKNO_PRNO) in FF68. I have checked in Maintain screen varient OT45 also it is not allowing Add the field name. please Advice. Thanks in advance. Regards, Venkat
-
Output quality from AVCHD 1080/25p source? (Canon HF100 PAL)
Hi, Background: I am interesting in FCPX but read so much negative about it. I am a consumer that today use FCE. I moved from iMovie to FCE to easy get good ouput quality. Then I compressed it to h264 using QuickTime 7 Pro and x264 codec. I have a ca
-
Whenever I update from Windows 7 get error 1602, iPod shows USB connection to iTunes, but iTunes will not recognize the device. None of the Apple documentation helps. The Apple Mobile Device driver is loaded and operating. The anti-virus software and
-
I have a problem with the SYNC
My problem is that my emails accounts only get actualized once i'm at home when phone automaticaly conects to my WIFI internet conection, but tha problem is that if i'm out my house i dont get any emails. what can i do?