I upgraded to ios7 and now volume on my iPad 2 doesn't work

I Upgraded to ios7 now volume won't work on ipad2

Try going into the settings and 'reset all settings'. That helps with some.

Similar Messages

I recently upgraded to ios7 and now my PC is not recognizing my iphone

I am having several problems. I recently upgraded to ios7 and now my PC (Windows 7) is not recognizing my iphone. 1) I am getting an error message when itunes opens: "Itunes could not connect to the iphone because it is locked with a passcode. You must enter your passcode on the iphone before it can be used with itunes." How did it get locked and how do I unlock it without losing my data? What do they mean by passcode? I don't have a 4-number code to get into my iphone activated. In fact, I've never had a passcode.
2) I cannot download my photos from my iphone onto my computer because my computer doesn't recognize my iphone. In other words, my iphone does not show up on my computer (no iphone icon, no DCIM folder).
3) This is a separate issue but it is also very confusing: I went online to check my iCloud and I cannot see any data (icloud.com). But I know that I set up iCloud when I upgraded to ios7 and it backs up my data every night. What am I doing wrong, am I unable to see my data and photos?
Why is this happening? It was bad enough that when I upgraded to ios7, I lost my Notes - I have no idea why they didn't return. But now essentially my iphone is not recognized when connected to my computer and this is very frustrating. I have read numerous previous postings regarding downloading photos onto the PC and regarding this passcode error and cannot find a resolution, so I would appreciate any help.

No problem!
This will make it easy for you:
http://www.tuaw.com/2011/07/09/quicken-wont-run-on-lion-heres-10-mac-apps-to-cur e-those-blue/

HT4623 I upgraded to ios7 and now my phone won't restart

I upgraded to ios7 and now my phone won't restart

Hi there ttillberg,
You may find the troubleshooting steps in the article below helpful.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
-Griff W.

I upgraded my 3 yr old iMac to Snow Leopard and now my HP C4150 Scanning function doesn't work (not recognized). I downloaded updated Drivers from the HP site, but still no joy. Any suggestions?

I upgraded my 3 yr old iMac to Snow Leopard (OS X 10.6) and now my HP C4150 Scanning function doesn't work (not recognized). I downloaded updated Drivers from the HP site and installed them, but still no joy. Any suggestions?

aspaceman,
Perhaps I owe you an apology. Having re-read that downloading from HP was unsuccessful I feel uncomfortable. Can I suggest you update your 10.6 system (as noted in your profile) to 10.6.8 (if it is not already there) by using the
Mac OS X 10.6.8 Update Combo v1.1 combo update plus any software updates that then apply.

I upgraded to mountain lion, now my mini dvi to hdmi doesn't work

I installed mountain lion and now my mini dvi to hdmi doesn't work. I did a disk permission repair, but that didn't help. Any suggestions?

My internet card will only work on 32bit,and it sounds like mountain lion only works on 64bit so that must be my problem. I think I will have to upgrade my internet or go back to lion.

My iPhone is acting up again; freezing up during phone calls and now the head phone jack intermittently doesn't work.

I got my iPhone 5 back in February 2013 and for the most part of the year I enjoyed it. Then I started having issues with it. First of all the WiFi randomly quit working. I didn't even update it. So I tried updating it, resetting, and restoring it. While it was under warranty I tried getting the issue fixed, but Apple CS blew me off saying it was accidental damage and I should have gotten Apple Care. This time Verizon covered their *** and replaced the phone for me even though it was out of their 6 month warranty period. I think I posted this experience before.
Now my iPhone is acting up again. It first started freezing up during phone calls and now the head phone jack intermittently doesn't work. Again, resetting, restoring, and updating it did not fix these issues.
<Re-Titled By Host>

The original issue they didn't state exactly why it was Accidental Damage. After running through some troubleshooting, they just stated it was Accidental Damage and that I should file a claim with my insurance, and that Apple Care would have covered it; then closed the request.
I've tried resetting settings, restoring it as new, and that was a no go. When it freezes up during calls I also have to perform a hard reset by pressing and holding both the power and the home buttons to get it functioning at all again(just completely freezes, won't respond to touch or home button.) I noticed that the proximity sensor isn't responding as well, so I have to tilt it away from my ear while in a call to keep from pressing the buttons on the touchscreen with the side of my face. I avoid phonecalls now, and text exclusively.
I don't live anywhere near a Genius Bar so I'm stuck with the online support to Apple. And since I don't have a landline, I get charged for their phone support so I tend not to use it.
Getting two lemons in a row seems coincidental so I'm wondering if it's a bad batch Verizon got then distributed out.

HT3258 Upgraded to Lion and now I can't get my monitor to work

I just upgraded to Lion and now I can't connect to my Dell monitor. I am using a MacAir. I have tried chaning the input. But that didn't work. Any suggestions?

That was a widely publicized fact, it is a good idea to always check compatibility before upgrading. Your options are to go back to SL or find another app.

Upgraded to ios7 and now 'slide to unlock' no longer brings me right to text or app alert that just came in. Is there a setting I am missing?

Before I upgraded to ios7 whenever I got a text or an app alert ( for instance: my turn in words with friends) I would 'slide to unlock' and first screen to come up would be that text or that app. Now that I have ios7 it just brings me to last screen visible before 'sleep' mode... is there a way to bring back that feature??

Awesome Glad we figured it out!

HT3529 I have upgraded to iOS7 and now can not get my iMessage to activate. It will not accept my Apple ID and I have tried a new password and restarting my phone but it will not activate. How do I fix this?

I can not use iMessage or blue tooth since the upgrade to iOS7. My Apple ID is not being accepted, even with a restart and a password change. I am not receiving texts from others who are sending as an iMessage. How do I fix this?

IF your imessage is saying waiting for activation then do this:
backup your phone to itunes or icloud.
then on your phone go to settings - general - reset - erase all contents and settings - this will wipe your phone clean.
once the process is done, you can restore from the backup you made, then you should be able to activate your imessage.

I upgraded to IOS7 and now I can't get past the icloud terms and conditions page. I press agree and the box pops up however I can't click on agree or disagree. Please help

i upgraded to IOS 7.0.2 on my ipad and now I can't get past the terms and conditions page to finish the setup. I click agree and then a small box appears to click agree again and I can't choose agree or disagree. I just need my ipad to work... help

Reset iPad and continue with update
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

I upgraded to Mavericks and now the scoll on my trackpad won't work. It works in Chrome, the finder, or MS suite. Only FF doesn't work.

The question has pretty much all the details. I'm running latest FF and Mvericks and the scroll/backward/forward function in the trackpad doesn't work. I can scroll in any other program, just not FF.

You're welcome atlantisflygirl.

Migrated to Prime infrastructure and now the login on the server doesn't work

We have recently migrated from WCS 7.0.230.0 to Prime Infrastructure 1.3.0.20 and now there is a problem with logging in to our accounts. The problem can be broken down into two parts:
1. We can't logg in using radius (this is still working if we use the WCS or other applications using the same rule)
2. Unless we delete and recreate our accounts we can't even logg in locally
We have re-entered the radiusservers (they disappeared during the migration)
We have tried changing authentication form from pap to chap (in both ends) and then back again
Our radius servers are running Win2k8 R2
Any suggestions on how to solve this? We really need to get the domain-loggin working

mmm, i would say make sure that you have the attributes related to virtual domain appended to the list.
If you have already done that ,
may be you need to try the following:
Step 1)
Open https://NCSIPADDRESS/webacs/dbUpdateAction.do
With root username and password
Step 2)
Execute the Query as below
Query (1)
update WCSDBA.WCSPREFERENCE
set value='ROOT-DOMAIN'
where key ='defaultPartition' and username='a_user'
note-
username should be changed to whichever user is facing issues while logging in
Query (2)
commit work;
or to remove all entries in WCSDBA.WCSPREFERENCE except for SYSTEM, root or ALL_USERS:
delete from wcsdba.wcspreference where username <> '[SYSTEM]' and username <> 'root' and username <> 'ALL_USERS';
commit work;
Step 3)
Restart NCS after the commit changes and try logging back with 'a_user'
Please make sure to rate correct answers

I upgraded to ios7 and now it says I have no internet connection.

I upgraded to ios 7 and it says it was successful. Problem is, anytime I try to connect to an app, check my email, etc., it is saying I have no internet connection. It will connect to wifi, but it still says I have no internet connection. I can't open anything. Can't sign into app store or any other app. Won't work connected to wifi or LTE. Very aggravated right now. Have rebooted phone, reset network settings. Nothing is working. Messages won't connect to iMessage. My phone is basically worthless right now. Anyone else having this problem? How do I fix it? Getting frustrated.

I upgraded my iphone 5 to IOS 7 and it will not recognise my previously OK bt home hub connection. If I go to an allternative, BT WiFI it connects but will not allow me to access anything on the web or any applications needing web access. Any way round this or can I revert back to IOS 6?

I just upgraded to iOS7 and now can't get push notifications from whatsapp, help?

I just upgraded my iphone 4s to iOS 7, and my whatsapp notifications stopped working. Every time I open the app I get an annoying message "please connect to itunes to recieve push notifications". I've checked in settings and the notifications for whatsapp are properly enabled. What should I do?

Cont play removed. Search forums and the shuffle works, it's just sort of hidden. I never shuffle so I don't have the answer, but I've seen it on these forums.

My iPhone 4 just upgraded to ios7 and now the keyboard has 15-20 second delay. How do I fix this!

Can I go back to iOS 6
Or is there a fix for this?
My phone is incredibly frustrating and worthless for texting now. The initial password typing has the same issue.

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
And this... Reset all settings
Settings > General > Reset > Reset all Settings.
This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.

I upgraded to ios7 and now volume on my iPad 2 doesn't work

Similar Messages

Maybe you are looking for