I upgraded to ios7 on my 4s and cannot get online

I upgraded last night and cannot get online.  I also lost my music.

Are you using wi-fi, and if so, did you check settings to make sure the button is set to "On"?  Maybe during updating, it may have knocked it out of whack.  As far as your music, did you back up before updating?  If so, you can probably connect to iTunes and load it all back. 

Similar Messages

  • Sometime cant type chinese after upgrade to ios7 on Ipad mini and iphone 4

    after i upgrade to ios7, my iphone 4 and ipad mini sometime cant type chinese. I have to reboot the device to resolve that.....

    Hi, after 8.0.1 & 8.0.2 updates we had these same issues on our iPads & 5s&c iPhones..
    Yesterday I called Apple Corp, got thro' to Customer Relations & then a Senior Engineer.. After trying all the usual stuff he downloaded my Logs etc..
    We await a reply in the near future from Apple Engineering..............

  • I've just upgraded to Iphoto v9.4.1 and cannot import photos from my hard drive

    I've just upgraded to Iphoto v9.4.1 and cannot import photos from my hard drive. no matter what method I use, either click and drag or through the File menu. All I get is a message 'Preparing to import' - file size is less than 300 kb

    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • I upgraded to 9.01 of Firefox and now get an error 'MORZCRT19.dll" -- because it falls within my area of expertise. I just need a few more details about your situation and I will get to work!

    I upgraded to 9.01 of Firefox and now get an error 'MORZCRT19.dll" --

    If you use ZoneAlarm Extreme Security then disable Virtualization and reinstall Firefox.
    See these about a similar problem caused by ZoneAlarm.
    *http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
    *[[/questions/880050]]

  • After Mac OS X 10.6.3 upgrade can't access Yahoo mail and repeatedly get message ""Sorry, we are over capacity. Please wait a moment and try again." Help, please,

    After Mac OS X 10.6.3 upgrade can't access Yahoo mail and repeatedly get message ""Sorry, we are over capacity. Please wait a moment and try again." Help, please.

    Did you run all the software updates after the 10.6.3 update, especially this one which will bring you up to 10.6.8.
    Mac OSX 10.6.8 V1.1 Combo update
    Run software update, starting with the one above.
    Then call your provider and ask them what is going on. They have probably changed POP to IMAP, 10.6.8 supports IMAP

  • My iPhone 4 can not reboot after upgrading to iOS 6; keeps trying and cannot shut off either.

    My iPhone 4 can not reboot after upgrading to iOS 6; keeps trying and cannot shut off either.

    I FINALLY got it to work on BOTH iPhone 4 and iPpad 3.  Here is what I had to do:
    Had to DELETE all e-mail accounts including icloud.
    Did a hard reset (hold down button on top right corner and round button on bottom center)
    Then once it came back on, the iPhone had ALL of the accounts still on it and it was receivng e-mail.
    The iPad receive e-mail until I did the steps above 5 times.  Plus, I had to add back all of the e-mail accounts vs. on the iPhone 4 they were there when my phone came on.
    Now I am receiving e-mail on both devices normally.
    No clue why this happened, but Apple needs to find a fix ASAP.

  • TS1545 I have downloaded 10.5.8 combo several times and cannot get it to install because the disc won't mount or the installation gets hung up after restart. My current os is 10.5.1, and I am trying to upgrade to snow leopard. This is on a dual core macbo

    I have downloaded 10.5.8 combo several times and cannot get it to install because the disc won't mount or the installation gets hung up after restart. My current os is 10.5.1, and I am trying to upgrade to snow leopard. This is on a dual core macbook pro.

    You don't need to update to Leopard 10.5.8 unless you want to keep Leopard. Upgrading to Snow Leopard requires that your purchase the retail install disk.
    The following covers Leopard:
    Some general advice on updating:
    It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
    So before you do anything else:
    If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
    Turn off sleep mode for both screen and hard disk.
    Disconnect all peripherals except your keyboard and mouse.
    1. Repair Permissions (in Disk Utility)
    2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
    At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
    3. Download the correct version of the COMBO update from the Apple download site.
    The Combo updater of Leopard 10.5.8 can be found here:
    http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
    If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
    Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
    More information on using Software Updater here:
    http://support.apple.com/kb/TA24901?viewlocale=en_US
    Using the Combo updater ensures that all system files changed since the original 10.5.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
    Now proceed as follows:
    4. Close all applications and turn off energy saving and screensaver.
    5. Unplug all peripherals except your keyboard and mouse.
    6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
    7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
    8. Once your Mac is awake, repair permissions again, and you should be good to go!
    If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious! In fact a second restart can be recommended.
    9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a week or two while you regularly check their websites for updates.
    N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
    Lastly, Apple's own article on the subject of Software Update may also be useful reading:
    http://docs.info.apple.com/article.html?artnum=106695
    [b]If you are updating Safari (or just have):[/b]
    Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up.  If you have installed an OS update and Safari is crashing, the very [i]first[/i] thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
    So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
    Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
    Additional tips on software installation here:
    http://docs.info.apple.com/article.html?artnum=106692
    To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for  problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
    Again, the advice is to remove all Input Managers from the following directories:
    /Library/InputManagers
    ~/Library/InputManagers
    especially prior to system updates (they can always be added back one-by-one later).
    Solutions for troubleshooting installation, startup, and login issues in Mac OS X v10.5
    http://support.apple.com/kb/TS1541?viewlocale=en_US

  • I recently upgraded and changed from o2 to EE, however although my number has transferred i cannot deactivate my imessage to receive to my transferred number and cannot get messages. To original number? How do i do this.

    I recently upgraded and changed from o2 to EE, however although my number has transferred i cannot deactivate my imessage to receive to my transferred number and cannot get messages. To original number? How do i do this.

    That's because apps are DRM protected & tied to the account used to originally obtain them. They cannot be transferred to another iTunes account. You can contact iTunes support, explain the situation, and request they add these apps to the download queue of your new account:
    http://www.apple.com/support/itunes/contact.html

  • I have a Mac Pro Intel Xeon 3.2 Ghz Quad core (mid 2012) using OSX 10.7.5) and cannot get iDVD to run.

    I have a Mac Pro Intel Xeon 3.2 Ghz Quad core (mid 2012) using OSX 10.7.5) and cannot get iDVD to run. I tried 7.0.4 and 7.1.2, both from Apple software update and both crash during "loading themes". I am reluctant to upgrade OSX from 10.7.5 because I do not want to loose Final Cut Express 4.0.1. Apple Care no longer supports iDVD. I want a version if iDVD that supports Chapter markers as in iDVD 7.?.? that i used with my old (now deceased) Apple Power PC Mac Pro.

    iDVD 7 should work fine with 10.7.5.  Try this basic troubleshooting fix:
    1 - delete the IDVD preference file, com.apple.iDVD.plist, that resides in your
    User/Home/Library/ Preferences folder.
    2 - delete IDVD'S cache file, Cache.db, that is located in your
    User/Home/Library/Caches/com.apple.iDVD folder. 
    3 - launch IDVD and try again.
    NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
    OT

  • App store tried to update iBooks app. I can only see Newstand app on my screen and cannot get to bookstore. How can I delete and download the iBooks app again. iBook still appears in the settings menu as version 2.1   Tx iPad 2, iOS 5.0.1, iBooks 2.1

    App store tried to update iBooks app. I can only see Newstand app on my screen and cannot get to bookstore. How can I delete and download the iBooks app again. iBook still appears in the settings menu as version 2.1
    Tx
    iPad 2, iOS 5.0.1, iBooks 2.1

    Hi,
    the settings are gone, i guess. But even worse, I cannot get the iPad2 to play Full HD thru the Apple digital AV adaptor using apps that support  (and advertise this), like AVPlayer HD. This definiteley used to work before one of the last iOS upgrades. (I am now at 5.1.1).

  • I am using AI CS2 on an eMac and cannot get the print menu options to recognize the print features l

    I am using AI CS2 on an eMac and cannot get the print menu options to recognize the print features like? I need to use mirror feature and high quality printing and it will not work.

    jdanek
    It is an eMac. I have a corrupted font book. How can I fix/re-install/or download a new font book app? Most fonts that were in it work, some do not, but I cannot open it nor can I install fonts into it.  This happened after the eMac OS was upgraded from 10.3.9 to 10.4.11 and AI was upgraded to CS2
    Kind regards,
    Steve Mosher
    Village Graphics LLC
    438 Troy Loop
    The Villages,  FL  32162
    352-409-6853
    [email protected]

  • I won Lightroom 1.0 a few years ago at an Adobe clinic in Fremont. I have since misplaced the original disk and cannot get the program to open. It wants a serial number and I don't have one. How can I get the serial number so I can use the software?

    I won Lightroom 1.0 as a door prize a few years ago at an Adobe clinic in Fremont. I have since misplaced the original disk and cannot get the program to open. It wants a serial number and I don't have one. How can I get the serial number so I can use the software?

    Thanks for replying, Jim. I wasn't planning to use it for raw images. I shoot film, black and white, and have many negatives I want to print. I am unfamiliar with the upgrades in Lightroom. I wasn't unhappy with the version I have. It was useful for my purposes.
    Because it was a few years ago, I don't remember if I registered the product. I was able to login to my account. But could not find a path to communicate with Adobe. I will keep trying.
    Ken

  • I have an IAMc 4.1 with intel core duo.  Upgraded from tiger to snow leopard but cannot get safari to run in 64 bit.  Is this because my older IMac won't support 64 bit?

    I have an IAMc 4.1 with intel core duo.  Upgraded from tiger to snow leopard but cannot get safari to run in 64 bit.  Is this because my older IMac won't support 64 bit?

    Hi,
    the Intel Core Duo processor is a 32-bit only processor and not capable of 64-bit.
    Only the Core 2 Duo and later processors are capable of 64-bit.
    Sorry
    Stefan

  • I Just up graded to Maverick and cannot get Face time to work

    I Just upgraded to Mavericks and cannot get FACE TIME to work?   Any suggestions?

    Hope info from this article is helpful.
    http://support.apple.com/kb/HT2090
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    If this does not help, contact Apple.
    Best.

  • I am trying to install Appletv with an iPad2 and cannot get Homesharing to work

    I am trying to install Appletv with an iPad2 and cannot get Homesharing to work

    Homesharing only works with computers. If your using an ipad you want to use Airplay instead.
    http://support.apple.com/kb/ht4437?viewlocale=de_de&locale=de_de

Maybe you are looking for