I upgraded to iOS8.1.3, and now when I attempt to backup my iPad to iTunes for Windows, it keeps popping up an error message

H. I upgraded to iOS8.1.3, and now when I attempt to backup my iPad to iTunes for Windows, it keeps popping up an error message "not enough space on the computer". There is over 130Gb of space! I have updated iTunes, but no change. Is it an issue in the iOS update? Or am I doing something wrong?
Would appreciate your guidance...
<Subject Edited by Host>

When you upgraded, itunes should have put a copy of the itunes library database in a folder named *Previous iTunes Libraries* . If you upgraded itunes today it will show as
iTunes Library 2010-02-28.itl
Use these directions to get it back
http://support.apple.com/kb/TS1967
Since I am not sure of your setup, look for the "Previous" folder on both your C: and F: drives.

Similar Messages

  • I have just upgraded from CS 6 (Dreamweaver) and now when I click on a picture on a web page in Dreamweaver it doesn't go to the folder where the photo is stored anymore.  If this continues I'll have to go back to CS 6 as I have to put in alot of photos.

    I have just upgraded from CS 6 (Dreamweaver) and now when I click on a picture on a web page in Dreamweaver it doesn't go to the folder where the photo is stored anymore.  If this continues I'll have to go back to CS 6 as I have to put in alot of photos.

    I am using dw cc and I just double click picture I want to change in dreamweaver cc and my image folder opens, select new photo and then it updates and I am good to go, I am using a mac

  • I have just upgraded to the iphone 5 and now when I send a text message it says its from astrogirl36@*** instead of my name, that is my name for icloud how do I change this

    I have just upgraded to the iphone 5 and now when I send a text message it says its from astrogirl36@*** instead of my name, that is my name for icloud how do I change this
    <Email Edited By Host>

    You are only as young as you feel......
    This is an example of how you can select the exact content that you want to sync to your device. You do not have to sync the entire iTunes library. You can pick and choose the music, apps, books and so on that you want to sync. This is using music as an example.
    Connect the iPad to the PC and launch iTunes.
    Click on the iPad name on the left side under devices.
    Click on the Music Tab on the right.
    Click on only the albums or playlists that you want to sync.
    Click on the Sync Music Heading.
    Click on Apply in the lower right corner of iTunes
    You can do this with apps, books, movies .... Whatever .... You have the freedom to sync whatever you want.

  • I've recently upgraded to Lightroom5.7.1 and now when I try to import photos a window pops up saying 'the photos can't be imported 'cos the files can't be read'. I had no problems before upgrading. I have Windows8 & can't find any 'app' which sets the typ

    I've recently upgraded to Lightroom5.7.1 and now when I try to import photos a window pops up saying 'the photos can't be imported 'cos the files can't be read'. I had no problems before upgrading. I have Windows8 & can't find any 'app' which sets the type of files I can import. Any help appreciated.

    Well, think about it. This is a Lightroom forum. We are here to answer questions about Lightroom and how to solve problems in Lightroom. Your permissions issue is an operating system issue, not a Lightroom issue. I didn't mean to be sarcastic. But there are plenty of Internet resources that will answer that question.
    I just went to Google and typed in "change disk permissions", and there are links for the Mac as well as for Windows listed. There's no sense in me rewriting instructions that are already available.

  • Changed battery in laptop and now when trying to open dreamweaver cs3, I get "licensing for this product has stopped working"... contact customer support (thats a laugh).  So what now?

    Changed battery in laptop and now when trying to open dreamweaver cs3, I get "licensing for this product has stopped working"... contact customer support (thats a laugh).  So what now?
    it says:  You cannot use this product at this time.  You must repair the problem by uninstalling and then reinstalling this product or contacting your IT admin or Adobe customer support for help.
    Well it seems I am only able to install this on a maximum of 3 computers so if I uninstall and reinstall I may have used up all three.  What caused this in the first place?

    And most licenses extend to 2 machines; not 3.  Your computer's clock probably reset when you changed batteries. Is your computer's clock set to the correct date and time now?
    See Activation & Deactivation Help
    Nancy O.

  • I had created my apple id from apple's site and now when i am trying to sign in to itunes ,i m being taken to payment method page and there is no option as 'none' and i dont have a credit card.What to do?

    i had created my apple id from apple's site and now when i am trying to sign in to itunes ,i m being taken to payment method page and there is no option as 'none' and i dont have a credit card.What to do?

    Unless you use the steps on this page when creating a new account : http://support.apple.com/kb/HT2534
    then you will need to enter credit card details before the account can be used to download any item from the store.
    If you don't have a credit card then you will need to create a new account, and follow those instructions. If you want to use the same email address then you will need to remove it from that account first e.g.by logging into it via the Store > View Account menu option on your computer's iTunes or via http://appleid.apple.com - you should then be able to use it on a new account.
    Steps for creating an account on a computer's iTunes : https://discussions.apple.com/message/24321860#24321860

  • HT3275 My backup got interrupted and now when I try to backup I get the following message: The backup disk image "/Volumes/Data/Macintosh.sparsebundle" is already in use.  What should I do so that I can start backing up again?

    My backup got interrupted and now when I try to backup I get the following message: The backup disk image “/Volumes/Data/Macintosh.sparsebundle” is already in use.  What should I do so that I can start backing up again?

    1. Restart your MBP and try the back up again. If this fails try step #2 below
    2. Unplug your Time Capsule from the AC giving it thirty seconds or so to discharge, plug it back in and retry the back up again once you're back online.
    3. if step #1 and #2 fails, go here:
    http://pondini.org/TM/C12.html

  • HT1766 i was updating the i phone and now when i restore my backup it ask for a password , which password ?

    i was updating the i phone and now when i restore my backup it ask for a password , which password ?

    the password that YOU set up to encrypt the backup.

  • I just upgraded to ios8 on my iphone4s. When I attempt to call from my car there's no ringtone.

    I just upgraded to ios8 on my iphone4s. When I attempt to call from my car there's no ringtone. Only silence until the call is answered. Has anybody else had this problem? Has it got to do with the ios8 upgrade? (Actually 8.02)

    which Apple says should appear automatically once the update is completed...
    I am perplexed where you read that. It isn't true. The iPad is synced to the data available to all devices using the iCloud account if you have authorized it in the settings; PhotoStream, Contacts, Mail, Calendars, etc. That is how the iCloud works.

  • I formatted by PC which erased the iTunes software as well. Now when i try to backup my iPad the new iTunes doesn't have access to my existing files. The option is to erase the current content of my iPad and replace it with existing files on my PC.

    I formatted by PC which erased the iTunes software as well. Now when i try to backup my iPad the new iTunes doesn't have access to my existing files. The option is to erase the current content of my iPad and replace it with existing files on my PC. How do i get access to the preivous library?

    Drrhythm2 wrote:
    What's the best solution for this? I
    Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer.

  • I recently upgraded to the newest Firefox and now when i click on my icon I get an error message and have to click on it b4 FF will open, what should i do?

    Hi,
    I recently downloaded the newer version of FF and now when i click to open it i am getting an error in the top left corner of my screen. i can't even read what the message says in entirety b/c it's wrapping over off the side of the screen. When I click the error message than FF will open. Also, when I'm trying to send emails from an online shopping cart thru my business and I'm getting an error that it won't send and that's never happened until this problem w/FF. Please tell me what i should to to get FF working normally again.

    Can you tell us what text is in the part that you can read ?
    Is it a message from Firefox or from the Mac Operating System ?
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

  • I recently updated my Ipod Touch to the ios 6 and now, i cant seem to use it with my itunes! A notification keeps coming up whenever i connect my ipod to itunes that a new version of itunes is required but it is the latest version alrdy. HELP!

    Hi all, I've recently updated my ipod touch to the ios 6 and now i cant seem to use it with my itunes
    whenever i connect my ipod to itunes, a notification saying that i need a newer version of itunes. However, when i check itunes for software updates, it seems i have the current version of itunes
    I am at a lost of what to do as i can no longer sync my ipod touch with my itunes.
    Help Pls!
    thanks

    You might tell us many more things so we don't have to guess and might be able to help.
    What computer do you have?
    What iTunes are you running now?
    What OS X system are you running are your computer now? Or is this a Windows machine?
    Let us know a little more info.

  • I reset my password and now when I attempt to download any update, my password is not correct

    Hello,
    Question for anyone that can help.  I have changed my password, and I wrote it down, so it is accurate.  Now when I attempt to download a new Itunes update, and I type in my password, it rejects it, stating it is invalid.  HELP.

    There are multiple possible passwords you might have changed.
    The first two below are the ones you need to update software, and then connect to iTunes.
    1. The MacBook 'administrator' password, in case you're NOT the admin, to 'authenticate' most software updates and System Preferences settings, and would likely be the one first requested when updating a downloaded iTunes program to the latest version. If you're the only user and you set up the computer, you're probably the admin.
    2. Your iTunes account password (whatever account name you use for iTunes, to authorize purchases and downloads of programs, apps, music, and rentals from iTunes. It might be your Apple ID and password, but it does not HAVE to be.
    3. Your Apple ID password IF ID AND PASSWORD ARE DIFFERENT FROM THE ID used for iTunes. The Apple ID is the one you used to login to Apple Support Communities and post your question.)
    (Probably the same as your iTunes account name password, but not necessarily)
    4. Passwords saved in your Keychain app, primarily passwords used online and saved by intentionally clicking 'remember' the first time you access a username/password page and each time you change the saved information. These are the ones filled in 'automatically' when you return to a webpage, and could be causing a problem if you haven't updated the saved password since changing it.
    5. Your MacBook user password but only IF you're NOT the administrator of your computer. The one you use to login to your MacBook at power-on and you don't have Admin priviliges)
    If this doesn't solve the problem, it's possible that Apple software downloads or Apple iTunes is having the problem. It's fairly rare that a long-term outage occurs, but minor glitches happen from time to time. Wait a few hours and try again.
    When new software products and major updates are released, such as OS X Mountain Lion (due to be released by the end of July), there is often a huge increase in traffic on the Apple servers, and that can cause lots of download problems, though not usually password problems.
    And, you can always try changing your password again.

  • HT201413 My ipod is a 4.3.5 and im trying to update it but cant cause is freezes on turn i try rebutting it does not wrok so i try restoring it and it wont even let me do that what do i do it just keep popping up a error code 3194 please help

    my ipod is a 4.3.5 and im trying to update it but it keeps freezing on me so i try restoring it but it just keeps puting error code 3196

    Have you checked the Apple support site? If not, take a look at this -> iTunes: Specific update-and-restore error messages and advanced troubleshooting
    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.
    If you've used some progam with your iPod that wasn't made by Apple, it might have modified the host file.

  • TS3642 It is really unacceptable that I cannot transfer my garageband format songs from iPad to iTunes for windows and then add them to my new iPad.  Any ideas?

    http://support.apple.com/kb/TS3642 tells me that this is not possible because garageband format songs are saved as folders.
    I just want to transfer songs from one iPad to another.  Why does Apple make things so hard?

    Perhaps turingtest2's fix works for you to transfer your project to iTunes for Windows, see:
          Re: Import a proyect from garage band to ipad
    But if you want to transfer between two iPads, you could use iCloud to transfer directly between the devices, if the iPads support iCloud and you are using the same Apple ID on both iPads.
    If you save the project (or better a duplicate of the project) to iCloud, you will be able to import it on the second iPad from the cloud.
    Regards
    Léonie

Maybe you are looking for

  • Macbook pro 17'' water damage... battery kindaaa works

    Like a million other people asking questions on here...I spilled coffee on my Late 2011 macbook pro 17'' and encountered problems since. After the damaged I followed all the recommended steps to make sure I could try to limit any damage that has occu

  • I need help with my mapping - CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV

    hi, guys, i need help with my mapping, i dont know this error (i not speak english) <Trace level="1" type="B">CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV</Trace> <Trace level="2" type="T">......attachment XI_Context not found </Trace> <Trace level="3" type="T"

  • How to pass java.library.path as a VM argument in JNLP file

    I jave a jar file containing reference to sqljdbc4.jar as I am using JDBC to talk with SQL Server. It works fine through eclipse IDE when I give the fillowing VM Argument -Djava.library.path=C:\Users\reddys2\Downloads\sqljdbc_4.0\enu\auth\x86. Withou

  • Weblogic 12c console doesn't update with datasources defined

    Hi Guys, I've observed this behaviour.. which seems to me as a bug somewhere.. Here is what happens.. 1. I define a datasource 2. Then I try to create JDBCStore for JMS messages.. I don't see my defined datasource in step-1 in the dropdown list.. 3.

  • Update of Intrastat details against Item Master Data

    Hi I'm looking to import Intrastat details against item master data.  I understnad from the portal that this needs to be imported to UDO but need some guidance in terms of template set up.  Grateful for any help Regards David