I upgraded to lion when it first came out but today i tried to open my photoshop cs2 and its telling me the powerpc applications are no longer supported is there any fix out there for this
i upgraded to lion when it first came out but today i tried to open my photoshop cs2 and its telling me the powerpc applications are no longer supported is there any fix out there for this
Lion is Not compatible with PPC (Power PC) based software, such as your older version of PhotoShop. Your choices are you can either upgrade to the newer version of PhotoShop, or you can backup your data and apps, erase your harddrive and reinstall Snow Leopard.
Hope this helps
Similar Messages
-
I have installed Lion and Microsoft Office 2011. I want to uninstall Office 2004, but of course I cannot run the application to uninstall, because I get the "PowerPC applications are no longer supported" message. Suggestions?
Go to this microsoft site http://support.microsoft.com/kb/312172 and/or this microsoft site http://support.microsoft.com/kb/2398768. I would suggest removing both to start with a clean slate. I had some problems with installing Office for Mac 2011 over 2008 and found out that by completely removing both and starting from a clean slate provided the best solution. Kappy is correct but some sniglets do get left behind. Hope this helps. Cheers.
-
I am getting the PowerPC applications are no longer supported error, so I downloaded Libreoffice and can not find it on my hard drive anywhere. It did say it would install to Applications, but it's not there. How do I find it and can I put it in my dock?
In Safari's preferences:
Look in the folder displayed where you see the arrow. The actual Downloads folder is found in your Home (user) folder. -
Please help with the message I am receving on startup ""You can't open the application NovamediaDiskSupressor because PowerPC applications are no longer supported."
I have read some of the replies in the Apple Support Communities, but as I am no techie, I would have no idea how I would implement that solution.
Please help with what I need to type, how, where, etc.
Many thanks
AppleSueIn HunterCreekI am afraid there is no solution.
PowerPC refers to the processing chip used by Apple before they transferred to Intel chips. They are very different, and applications written only for PPC Macs cannot work on a Mac running Lion.
You could contact the developers to see if they have an updated version in the pipeline. -
thx
That's what it means. The program cannot be run on your Mac. It is old PowerPC code. You need to get a version that will run on an Intel-based Mac.
-
Safari and the App store icons are both deactivated. I also cannot a software update check, as it gives the 'PowerPC applications are no longer supported error'
Very frustrating, cannot do anything with this laptop now. Any help is greatly appreciated.If you don't already have a current backup, back up all data. There are ways to back up a computer that isn't fully functional. Ask if you need guidance. You can skip this step if you don't care about the data that hasn't been backed up.
Reinstall the OS.* Your data should be unaffected unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
*The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later. -
PowerPC applications are no longer supported on OS X Lion
I recently purchased SAT/PSAT/ACT preparation material for my daughter from Kaplan. I could not run the software on OS X Lion that I have. The error message I get is - " PowerPC applications are no longer supported". Does any one know what the solution is?
Lion no longer supports the Rosetta emulator used to run PPC-only applications. If Kaplan is using proprietary software then you need to contact them about an update. If they are using some other third-party software then you may need to contact its developer.
-
I just upgraded to OS X Lion and now I can't open the application Adobe ImageReady CS because PowerPC applications are no longer supported. Is there anything I can do to fix this?
There is no fix. It simply means that the software is outdated. Adobe would need to release a newer non-PPC version that supports Lion. They may have done that already, I don't know.
-
As of today, I can no longer or Excel. I get this message: You can’t open the application “Microsoft Excel” because PowerPC applications are no longer supported. Is there a fix for this and why ha this all of the sudden happened. I've rebooted twice and that hasn't worked.
The application may be corrupt. Un-install and re-install Office.
Office 2011 Removal
Office 2011 Removal (2) -
My itunes radio rebuffers every 8 seconds - is there any fix or help for this problem. I am running the latest itunes on a new Mac with 4MB download speed.
You need to update your Mac OS to at least 10.5.8.
Itunes 10+ requires Mac OS 10.5.8+ -
I installed Lion 10.7.4. Went to use Photoshop Cs and got a popup window. You can't open the application Adobe Photoshop CS because PowerPC applications are no longer supported. Is there a way of getting this to work or do I have to get newest version of all of my Power PC apps?
Welcome to Apple Communities
PowerPC applications are unsupported in newer versions. You can upgrade Photoshop or you can install Snow Leopard in a partition.
1. Open Disk Utility (Applications > Utilities) and select your drive
2. Go to Partitions tab, press + button, create a new partition and press Apply
3. Insert the Snow Leopard install DVD and reboot pressing C key
4. Install it in the new partition
5. If you want to change boot, go to System Preferences > Startup Disk and select 10.7 -
Hi, I just tried to open Word and this message appeared - 'You can't open the application Microsoft Word because PowerPC applications are no longer supported.' I just recently loaded OS X Lion does this mean my software for MS Office is now out of date? Do I have to purchase a new package? Any help appreciated.
Hello:
Office 2004 was written for the PowerPC chip only. There is no emulation in OS X 10.7.
I encountered the same issue sometime ago when I updated to OS X 10.7.
There is one option that I might mention (other than buy Office 2011). I switched to Apple's iWork. Pages (the word processing package) is completely compatible with Word. If you export Pages documents, you can export them in formats compatible with Microsoft programs. iWork also contains programs that are compatible with Office presentation and spreadsheet packages.
The reason I mention this is that the cost is about 1/2 of the cost of Office.
Barry -
I just download mountain lion to my mac, now microsoft office suite doesn't work....it says 'you can't open the application 'microsoft word' because PowerPC applications are no longer supported. What does this mean and what do I have to do to fix it?? HELP!!
Install Snow Leopard on another boot partition, or upgrade Microsoft Office to a newer version, or use any number of better alternatives. Some of them are free.
Consider
LibreOffice (donation-supported)
NeoOffice ($10)
OpenOffice (completely free)
In addition to the above I also recommend Apple's Pages ($19.99). I use OpenOffice and Pages and have been completely Microsoft - free for over a year now. Life is better without Microsoft. -
Just upgraded to Mac Lion... can't access Appleworks6...get this message... "You can't open the application AppleWorks 6 because PowerPC applications are no longer supported".... I've got dozens of documents saved that I can't access?!!!!!
Rosetta is not included Lion, if you are not familiar with Rosetta it was an application included in Tiger, Leopard and Snow Leopard that allowed PPC based apps to run on Intel based machines. That was over 5 years ago so it's time to move on. As has been suggested you can read those documents in Pages which is available on the App Store. Pages is part of the iWorks suite that replaced AppleWorks years ago. Currently iWorks is on iWorks 09 , and includes Pages, Numbers and Keynote. You can find each on the App store.
-
I recently upgraded from leopard to lion, now I can't open iPhoto get the message 'you can't open the application iPhoto because PowerPC applications are no longer supported'. I had no idea that this would happen - what can I do?
What version of iPhoto do you have?
Regards
TD
Maybe you are looking for
-
How to reference a parent element in Excel Templates
I am using an excel template and I have nested groupings of xml that I wish to flatten, for example: <G_DEPT> <DEPARTMENT_ID>10</DEPARTMENT_ID> <DEPARTMENT_NAME>Administration</DEPARTMENT_NAME> <LIST_G_EMP> <G_EMP> <EMPLOYEE_ID>200</EMPLOYEE_ID> <EMP
-
I have been asked to try and create a AP aging report. I have an AR Aging one complete. I did also try and change the tables around to get nothing but AP, but AR keeps coming into it.. Do any of you experts have a general starting query that I can us
-
Originally the songs were only partially downloaded. After completing the downloads to itunes it was suggested to de authorize the computer and then authorize the computer. Still unable to transfer to classic ipod. Even tried resetting ipod. Any sugg
-
Strange behaviour of 2nd monitor full screen image
Hi, Since last night, my LR5 is starting to behave very strangely with my 2nd monitor image. My 2nd monitor has been set to "Show, Full Screen and Loupe-Normal", and I have always been using this two monitor set up to show my image in full screen mod
-
Efficient Way to output this data, don't want to use evaluate
Hey everyone, I have a form that creats field names with dynamic names, basically just a name like "Box" with a counter at the end so you end up with "Box1" "Box2" "Box3". How can I easily output all the information contained in this form, since I wo