I upgraded to Mavericks and all of my mail accounts quit working.

No SMTP or POP. Opened connction doctor and all settings are as before. VERY frustrating. Any suggestions?

Hi bschwab!
I have a couple of articles for you that can help you troubleshoot this issue:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Mail (Mountain Lion): Solve Mail problems
http://support.apple.com/kb/PH11720
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

Similar Messages

  • I have recently upgraded to mavericks and I cannot get my scanner to work.  I tried deleting the printer and reinstalled it but no luck

    I have recently upgraded to mavericks and I cannot get my scanner to work.  I tried deleting the printer and reinstalled it but no luck

    Canon does not support the MP530 on Mavericks, they have not produced drivers and apparently do not intend to,

  • I just updated to Maverick and now my .mac mail account is not receiving any incoming mail.  Please help!

    I just updated to Maverick and now my .mac mail account is not receiving any incoming mail.  Please help!

    Try going to Mail/Preferences/Accounts/iCloud/Advanced and setting Authentication to Apple Token.

  • I upgraded to Mavericks and can't find a driver to work with my EPSON Perfection 4990 scanner.  The Epson site says to update thru my mac but it there is nothing there.  Any suggestions?

    I upgraded to Mavericks and can't get my Epson Perfection 4990 scanner to work.  I had gotten it to work with a driver I downloaded from EPSON with Mountain Lion

    Hi...
    Epson is vorking on updating drivers and utilities for this scanner.
    From the epson site :
    "Description:
    An OS X 10.9 compatible Scanner Driver and EPSON Scan Utility for this model is not yet available but is coming soon. Please check back for availability."
    So, until then you can only use the basic scanning provided by Image Capture.
    Alternatively take a look on vuescan.
    Regards
    /Dennis

  • I have a old imac OSX.4.11.  Lately my .mac mail account quit working and rejecting my password, even a reset password

    I have an old imac with the swivel flat screen-OSX4.11.  My .mac mail account has quit working--it rejects my password--even a reset password.  Connection Dr. says to "make sure username and password are correct", over and over.  Help!

    Hello,
    Did you change it over to iCloud yet? It does work in 10.4.11
    The Password rejection can confuse people since it's a catch all meaning...
    This Password, Username, Authentication method... is not recognized on this Port to this Server, or a server end problem.
    If using a browser to login via WebMail works it's not Name or Password, but one of the other ones.
    The receiving email ports are:
    IMAP is port 143
    IMAP-SSL is port 993
    POP is port 110
    POP-SSL is port 995
    Outgoing ports are...
    SMTP and SMTP-SSL is on ports 25, 587 and 465. Port 587 has to be SSL, and port 465 is enforced TLS-wrapped and is generally used by Outlook users.
    Do not delete the old account yet. sign up for an iCloud account if you haven't.
    I understand .mac/.me mail will still come through. Do not delete the old account yet.
    You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
    iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
    On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
    IMAP (Incoming Mail Server) information:
        •    Server name: imap.mail.me.com
        •    SSL Required: Yes
        •    Port: 993
        •    Username: [email protected] (use your @me.com address from your iCloud account)
        •    Password: Your iCloud password
    SMTP (outgoing mail server) information:
        •    Server name: smtp.mail.me.com
        •    SSL Required: Yes
        •    Port: 587
        •    SMTP Authentication Required: Yes
        •    Username: [email protected] (use your @me.com address from your iCloud account)
        •    Password: Your iCloud password
    Also, you must upgrade your password to meet the new criteria:  8 characters, including upper and lower case and numbers.  If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message.  Go to   http://appleid.apple.com         then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
    Thanks to dpepper...
    https://discussions.apple.com/thread/3867171?tstart=0

  • Upgraded to Maverick and printer no longer works

    I upgraded to Maverick and my printer: Canon MX850 no longer works.  I downloaded drivers from canon website but did not seem to work

    First, delete the driver you downloaded. OS X includes a driver for your printer:
    http://support.apple.com/kb/HT3669#canon-inkjet
    I would delete the printer from the system, restart, and the system should "find" your printer.
    Barry

  • I just upgraded to the maverick and, of course, the iPhoto does not work with it.  How do I upgrade to version 11?  I cannot find it anywhere

    Recently upgraded to Maverick and the version of iphoto does not work with it.  How do I get and download the version 11?    I can't find it anywhere

    Which iPhoto? 9.4.6  and 9.5.1 work here.
    FWIW, iLife '11 is available here: http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES

  • Upgraded OSX to 10.6.4 and my .mac/me mail account has disappeared

    Upgraded this morning, and my.mac/me mail account has disappeared.
    When I "Add Account", I get this message..
    "The account “MobileMe” already has this host name and user name."
    ANy ideas?

    I'd ask in the MobileMe forums first:
    http://discussions.apple.com/category.jspa?categoryID=228
    then the Snow Lewopard forums:
    http://discussions.apple.com/category.jspa?categoryID=263
    As this sounds less like a machine-specific issue than a general OS or MobileMe issue, I would think you are more likely to find a solution in either of those two areas.

  • Upgraded to Mavericks - and iCloud.   Calendar will not stop 'updating' - and has not synced all entries across all devices/calendars.

    Hello Apple Support Community;
    I am looking for some help on several matters related to my upgrade to OS X Mavericks this week.   THIS issue is one related to CALENDAR.
    I believe that I have done everything (as instructed) to install, activate, and sync contacts and calendars via iCloud - immediately following my upgrade to Mavericks earlier this week.   When I opened CALENDAR for the first time - from the Dock on my computer (not the iCloud calendar) - after upgrading to Mavericks and setting up iCloud - CALENDAR provided a pop-up notification stating "Moving calendars to server account..." with a moving "candy cane" progress bar.  
    This has been "updating" for about 12 hours, now.   And while open and "updating" - it will not allow ANY other commands, scrolling, or menu options.   Additionally, I am unable to close this calendar of the Mac, unless I 'Force Quit'.   I have, in fact, executed Force Quit, and restarted the Mac.   No change... it still "updates".  
    When I open the iCloud calendar - it opens and works (mostly).   There are events on my iPhone 5 that are not on the iCloud calendar.   And there are events on the iCloud calendar that are not on my iPhone.   I have created new calendar events on each calendar account (iCloud on my Mac and iPhone 5) - and they seem to automatically update each device.   There does not seem to be any obviously rationale for the inconsistency of the calendar (iCloud and iPhone).
    Can you offer ideas for possible solutions to:
    1)  the "permanently updating" calendar from the Dock on my Mac?
    2)  ensure that all events are properly synced across all calendar accounts (and devices)?
    THANK YOU!!

    Hello Phil... I got nothing from the Apple Communities.   May have been very hard to diagnose via my description - or hard to resolve given many possible solutions.  
    The perpetually updating scroll-bar-of-death continued for about a week.
    I DID (finally) get resolution from the Genius Bar in my local Apple Store.   They deleted all prior "local" calendar back-ups and content - as I had my Calendar up on iCloud - which essentially "reset" the calendar function... and then reloaded the calendar, and then pulled in my calendar data from iCloud.  
    They twisted and tweaked a few more things that I was not able to follow (sorry I cannot offer more assistance on these other things).
    They also reloaded Mavericks.  
    Everything seems to be working well now.
    Apple Community... any more guidance for Phil - and others???
    Good luck, Phil.

  • I upgraded to Maverick and lost all my photo library in Aperture.  How do I recover my photos?

    I upgraded to Maverick and lost my entire photo library in Aperture.  How do I recover my photos?

    Update software.
    https://discussions.apple.com/message/23915522#23915522

  • Can't open Pages '09 Document (Upgraded to Mavericks and Pages 5.0))

    There is one Pages '09 file that I can not open now that I have upgraded to Mavericks and the new Pages.  Of course it is an assignment that my son needs for school!  When I double-click on it I get the message that the document could not be read, that it does not have a valid format.  I tried opening it with the 4.3 version of Pages, but get the same result.  I also tried to pull the document from the time machine, and same problem.
    Any suggestions/work-arounds?  I tried simply renaming the file format--no luck.  Do I need to repair permissions? 
    I am on a 3-week old iMac 2.7 GHz Intel Core i5 with 8GB 1600 MHz DDr3, 1GB old school drive.
    Jim

    Maybe try what was suggested here:
    https://discussions.apple.com/thread/5466954?tstart=0
    "I had this problem with both pages and numbers so I closed all the background apps did a reset by holding down the home and power buttons and now they both work."

  • I have just upgraded to Mavericks and have been using Time Machine on an external disk with Snow Leopard.  Can I continue to backup with Time Machine on the same external disk or do I need a new disk since the operating system has changed?

    I have just upgraded to Mavericks and have been using Time Machine on an external disk with Snow Leopard.  Can I continue to backup with Time Machine on the same external disk or do I need a new disk since the operating system has changed?

    Hi there,
    I found that Time Machine in Mavericks will sort it all out for you. You shouldn't need to buy another backup drive, unless you have insufficient space left and can't afford to delete whats on there. It should just work fine.

  • I upgraded to Mavericks and automatic updates disabled printer wifi connection

    I upgraded to Mavericks and purchased new HP OfficeJet Pro 8100 printer with wireless connection.  Has been working fine until today my system downloaded a bunch of upgrades automatically: I didn't know how to stop the automatic downloads (I was accustomed to deciding which ones I wanted in SnowLeopard!)  but it downloaded all of them and I don't know which ones to trash and I REALLY DON'T KNOW HOW TO DISINSTALL ANY OF THEM! I am really in a quandary and about to throw the new printer and anyone else I can find out the window~
    Here is list of automatic downloads:
    OS X NTP Security Update; Security Update 2014-005v. 1.0; Safari v.7.1.2./ Remote Desktop Client Update v.3.7.1/ OS X Update Combined 10.9.5/ iTunes v. 12.0.1/ iBooks Update v. 1.0.1/ HP Printer Software v.3
    Now the printer won't connect to Wifi (nor with USB cable)... It was working fine yesterday. I read that some updates block connections but have no idea what to do now???
    HELP
    Rose

    Have you tried removing the HP from Printers & Scanners and then adding it back again to see if this will let you print?
    You could also try a reset of the printing system. Note that this action will remove all devices from the Printers & Scanners preference pane thus requiring you to add them back again. To reset, open Printers & Scanners and right click in the section where your printers are listed, A small pop-up menu will appear. Select it and confirm that you want to reset and then enter your admin password when prompted.

  • Just upgraded to Maverick and can't get my opening page to stay on GOOGLE. it keeps opening in SITES and then I have to click on GOOGLE.

    I just upgraded to Mavericks and can't get my opening page to stay on GOOGLE. IT keeps opening in SITES and then I have to click on GOOGLE to begin searching. I would rather not hav to go through 2 steps to start everytime. I entered google's address in preferences but it ignores my preference.

    You don't say which browser you are using so I will assume it's Safari. If so then open Safari - Preferences - General tab and look for where you set the home page, just set it to www.Google.com
    If this fails for some reason then  open Safari and reset it (look in the Safari menu) and choose all options for the reset. The re-try setting the preference. Post back with your results.

  • Upgraded to mavericks and now both email accounts have been merged into one

    just upgraded to mavericks and now both mine and my husbands email accounts have been merged together rather than having separate inbox's.  How do I separate them again?

    Great question, I have a similar problem except that the photo library appears to take precidence over my organised folders so not all of my folders appear on my IP 5.
    I eagerly await a solution,

Maybe you are looking for

  • Switching to AT&T with family plan -- need multiple iPhone 4's

    We are currently Verizon customers coming to AT&T for the iPhone 4. We want to get three iPhone 4's, along with another regular phone, and put them on a family plan. My son lives 4 hours away, and won't be able to come to the local AT&T store on June

  • Wireless keyboard requires constant re-pairing

    Hello Apple Community, My wireless keyboard requires Blutooth re-pairing with my 27" iMac everytime I start the iMac up. Very frustrating. Does anyone have any suggestions? Thanks, Qtheband

  • DataTime type shows as Timestamp(6) in BAM Database Table

    Hi, I am new in BAM, Am facing an issue with BAM Data Object. I have two DateTime fields in DataObject. But when I look in BAM database Table,the field data type is stored as TIMESTAMP(6). I want both the elements in DateTime format. Is there any rea

  • E1 framming / unframming

    Dear All, Why unframming is required in E1 card? On VWIC2 card "channel-group 0 unframmed" is not working whereas "channel-group 0 timeslots 1-31" is working.So is this resulting 31*64=1984Mbps or its equivalent to  2Mbps ?

  • How to install ubuntu on z 580

    dear anyone,                        hey i have purchased a lenovo z 580 ,and i want to install ubuntu on it along with the win7 home basic that came with the laptop ,when iam trying to install it is not showing the win 7 .... that it genrally shows w