I upgraded to Mavericks and now in pages and numbers my files text cannot be seen

I upgraded to Mavericks and now in pages and numbers my files text cannot be seen unless you highlight it. I am using iWork 08. and running 10.9.4

These are the versions of iPhoto that are and are not compatible with Mavericks:
What version of iPhoto are you running?  What happens when you try to launch iPhoto?  Any message?
OT

Similar Messages

  • I just had a new hard drive installed and now my pages and numbers are missing... do I have to purchase those?

    My hard drive died on my MacBook Pro.  So the Apple store installed a new hard drive for me yesterday.  Now I can't find Pages or Numbers at all.  Do I have to purchase these?  Thanks for the feedback!

    Did you purchase them or did they come with your Mac?

  • Just upgraded to Mavericks. Now I cannot access scans from my hp scanner. After it complete the scans and I try to save as tiff, jpeg or pdf I get a either a grey blur or a message that says cannot save because the file cannot be written to.

    Just upgraded to Mavericks. Now I cannot access scans from my hp scanner. After it complete the scans and I try to save as tiff, jpeg or pdf I get a either a grey blur or a message that says cannot save because the file cannot be written to. I did not have any problems before the upgrade. I would greatly appreciate any light shed on this.

    Go to the HP site and look for drivers for your scanner. It apparently needs an updated driver to work with Mavericks.

  • Upgraded to Maverick. Now cannot connect to wifi. All my other devices will connect. Have rest wireless hot spot switch and cable modem. Other devices still connect but MacPro does not. MacPro wireless is self assigning an IP address blocking access.

    Upgraded to Maverick. Now cannot connect to wifi. All my other devices will connect. Have rest wireless hot spot switch and cable modem. Other devices still connect but MacPro does not. MacPro wireless is self assigning an IP address blocking access. It will connect if I connect to my iPhone hot spot via wifi. Any ideas?

    If you follow this video you'll see how to delete your WiFi AP from the OS, this will allow you to select it again which I feel will correct your problem.
    https://app.box.com/s/fe7v7h7kywjr23spumqp

  • I have a Macbook Pro {retina}. I have a Maxtor One touch (Firewire that I have used with a Thunderbolt adapter and it has always worked well, uintil I upgraded to Mavericks. Now it crashes when I try to use it. What gives?

    i have a Macbook Pro {retina}. I have a Maxtor One touch (Firewire that I have used with a Thunderbolt adapter and it has always worked well, uintil I upgraded to Mavericks. Now it crashes when I try to use it. What gives?

    I suggets you contact the manufacturer. They may have a software update or a workaround.
    Barry

  • When i 'upgraded' to Mavericks, it locked me out and shut down my computer.  now it won't print from my Epson Stylus CX3810.  Epson doesn't have the driver to download and neither does the App store.  Suggestions?

    when i 'upgraded' to Mavericks, it locked me out and shut down my computer.  now it won't print from my Epson Stylus CX3810.  Epson doesn't have the driver to download and neither does the App store.  Suggestions?

    I'm having similar problems with my Epson Stylus DX5000.  There was no in-built driver available (the generic old and new Stylus drivers didn't work), so downloaded the latest driver from Epson site.  It shows as being available to print to, but just sends data to the print queue then job disappears.
    I hope you're right C F McBlob, I could do with printing today but if there are new drivers available from November 5, then so be it.

  • My IMac 21.5 mid 2010's HD is going bad on it, after upgrading to mavericks it slowed way down and after it shut off and now won't come back on, would Seagate Barracuda ST2000DM001 2TB Serial ATA Hard Drive - 7200RPM, 64MB, SATA 6Gb/s worked?

    My IMac 21.5 mid 2010's HD is going bad on it, after upgrading to mavericks it slowed way down and after it shut off and now won't come back on, I call apple support and they told me to bring it in but the nearest store is about two hours away. They said I need it to erase my hard drive but I have too many family pics on it.
    would Seagate Barracuda ST2000DM001 2TB Serial ATA Hard Drive - 7200RPM, 64MB, SATA 6Gb/s worked on it? I could replace the internal and get an enclosure for the original until I get the pics out of it?
    Please advise, it's like five years of family pics I don't wanna loose them and I am worried.
    Thanks
    Al Florez

    A Brody,
    I really apprecate your very quick respond, Its too late to back up as of now, my hard drive wont load at all so I cannot follow your instruction to back it up. Learn a hard lesson but I will from now on following your link.
    Also my hard drive it is not available to do the free exchange program.
    I read the OWC instruction on how to replace the drive I was just wondering if the 2TB would work on it instead of the 1 TB they offer, I specifically asked for the Seage Barracuda because I had great experiences with it on PCs.
    Again, Thank you

  • Upgraded to Mavericks. Now External HDD Enclosure Won't Mount. Is there a fix?

    Upgraded to Mavericks.  Now I can't get my external HDD enclosure to mount.  A little about this enclosure, as it's not the usual settup .  I have four 3TB HDDs in a RAID5 settup.  The most unique part is that they are formatted as a Windows NT Filesystem (Tuxera NTFS).  Basically, when I set this up, I had to get a lot of info from a Windows-formatted HDD, but also be able to read/write afterwards. It's worked fine for ~ 1 year, but now that I've upgraded to Mavericks, nothing will mount.  I ran Disk Utility, where I see the HDDs (I've partitioned them into four drives of varying sizes), but they are greyed out.  I tried to mount them, but it says it won't and that I should run First Aid.  So I did...tried to "Repair Disk," but it just gets stuck on "Updating boot support partitions for the volume as required."  For over an hour it's been on that message.
    So, does anybody out there have a fix?  I've read several similar posts about people having a hard time mounting and, overall, dealing with external HDDs after upgrading to Mavericks.  But nothing seemed to fit my exact circumstances.  Lastly, I should mention that I've used both Firewire and USB connections.  Both resulted in the same.
    Thanks.

    I can't help with specifics for your issue, but some general thoughts:
    The upgrade and the disk problem may be a coincidence. It would help you if you could verify that the drive still works fine on a windows machine. If you run a windows virtual machine or have a windows pc, or a friend does, verify full functioning that way. If it still won't mount on the mac, try to copy/backup it's data onto the windows machine (maybe another external drive connected to it. You could then scrub the disk in windows, leave it unpartitioned, unformatted. Connect it back to the mac and format it as HFS+ (Mac extended journalled) and transfer the data back to it by sharing the windows machine external drive and connecting the two machines with a network cable.

  • Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I am operating with CS4. Photoshop produces an error " Could not complete your request because photoshop does not recognize this type of file"

    Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I have operating with CS4. Photoshop produces and error " Could not complete your request because photoshop does not recognize this type of file"

    Assuming you mean 5D Mark III, Photoshop CS4 cannot directly open raw files from your camera.
    Generally speaking, Adobe stopped updating older versions to be able to read raw files from newer cameras when they released a new major version of Photoshop. Photoshop CS4 is no longer receiving Camera Raw updates.
    You can double check this yourself:
    First you need to determine whether Adobe has released support for your new camera in your version of Photoshop. To do that, look at these two pages. You'll want to find out the earliest version of Camera Raw that can support your camera, then what version of Photoshop can run that version of Camera Raw.
    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    If you find your camera is supported by your version of Photoshop, you need to download the latest update for Camera Raw. There's more information on how to do that here:
    Keeping Photoshop Up-To-Date
    If your version of Photoshop cannot support your camera, you can download and install the latest version of the free Adobe DNG Converter, which can take your raw files as input and put out DNG format files, which your version of Photoshop can open.
    Photoshop Help | Digital Negative (DNG)
    The DNG converter DOES work, but if you want maximal quality from your raw files (not to mention the convenience and ease of use of directly opening your raw files) you'll want the latest version of Photoshop. Adobe has made substantial improvements in raw conversion quality in recent years.
    -Noel

  • I have upgraded to Maverick. Now I can't open any of my Quark 9.5.4.1 files.

    I have upgraded to Maverick. Now I can't open any of my Quark 9.5.4.1 files. The files open almost all the way, and then just stop. I've tried restarting, and creating new Quark preferences. Any suggestions?

    Or you may obtain iWork '09 DVD package from Amazon online et al. Sold at very low price now. It is really worth it. Don't forget to apply the iWork 9.0.3 updater after intalling it.
    iWork 9.3
    http://support.apple.com/kb/DL1563
    Regards,
    H

  • I upgraded to Mavericks from 10.6.8 and I no longer have any of my mail folders in macmail. If I look up an email via spotlight, I can find it, so it's in there. How do I restore my folders?

    I upgraded to Mavericks from 10.6.8 and I no longer have any of my mail folders in macmail. If I look up an email via spotlight, I can find it, so it's in there. How do I restore my folders?

    As an update: I was able to find my archived boxes and emails on my hard drive by doing this:
    Open a Finder window.
    Select Go | Go to Folder… from the menu.
    Type "~/Library/Mail/V2".
    Once I was able to get my macmail working properly, most of my mailboxes appeared, however not all and only a few recent emails are in a few of the boxes.
    I really need to move the emails from the archive back into my macmail. When I try to import using the mbox method, it doesn't recognize the .mbox even though they are .mbox. Other than re-emailing each individually to myself, I don't know what to do. Does anyone out there have any suggestions as to some easier solution?

  • I applied a template to a page with SWFs and now that page does not play the SWFs. Why?

    I applied a template to a page with SWFs and now that page does not play the SWFs (just a blank area where the SWF should be). When I detach the template it will play the flash file. This site will eventually be updated via Adobe Contribute. And I just discovered that when applying a template to a page that uses HTML datasets (Master/Detail),it no longer reads the Master/detail regions and displays a blank. Any thoughts?
    [Moved to Dreamweaver forum by moderator]

    Firstly, you shouldn't really 'apply' a template to a page, you should create a child page by going to FILE>NEW>Page from Template.  Too many things can happen when applying a template the way you are doing it. eg:; editable and non-editable regions not matching up and being asked where to place these regions and in all likelihood, you end up with 2 or more of the same region.
    When a swf file is inserted into a page, a corresponding Scripts folder is written automatically is stored in the root of the site - it is also linked to in the head of the document. What I believe is happening is that when you apply a template to the page, the Template has no idea that there is a swf file on the page and is not aware of the correct link to the Scripts folder.  If you do a test and add the swf file to the template page itself, I bet that the links to the swf and the scripts folder are correct - because DW knows the correct path to the script file.   Hence the reason the page probably works when you detach it from a template.

  • Just upgraded my workstation and render nodes to AE CC 2014 and now I receive a "render control file not valid" upon rendering out.

    I just upgraded my workstation and render farm to AE CC 2014 and now I receive a "render control file not valid" on my render nodes when I try and render out an image sequence. Any ideas why the update would cause this? All my machines are updated to the latest version of AE CC 2014. Thanks!

    Sorry I meant "Update". I was using AE CC, Installed AE CC 2014 on all my machines recently.

  • TS1702 I have purchased and installed Facebook, pages and numbers apps. However I am now unable to open any of these apps. When I click on the app the GUI just bleeps. Any suggestions please?

    I have purchased and installed Facebook, pages and numbers apps. However I am now unable to open any of these apps. When I click on the app the GUI just bleeps. Any suggestions to resolve this please?

    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Or....
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Or....
    Try downloading another app - any free app is fine. See if that resets the other apps.

  • I am having trouble upgrading to maverick after meeting all specs and requirements

    I am having trouble upgrading to maverick after meeting all specs and requirements

    Are there any symptoms, errors or diagnostic messages related to the failure?

Maybe you are looking for

  • Why is PS CC2014 crashing all the time? Can anyone with experience help?

    Hi there I have had relentless problems with all versions of PS CC and PS CC 2014. It crashes almost every time I use it. Some days I get away with it, but mostly I don't. It is basically becoming unusable which is a nightmare because I rely on it fo

  • Error when deploying SSXA application to WebLogic

    Hi guys, We're trying to get away from JDeveloper for our SSXA development (slow, buggy, not well known) and moving to Eclipse instead. I've configured a new WebLogic domain (using the Configuration Wizard, selecting the Oracle JRF components), insta

  • How to Add CSS

    Hi, All. Please , tell me how to add a new CSS definition. do i have to add a new file(ccs or xss)? Where should i add a definition to use it in property pane in Jdev ? regards

  • Duplex printing for last 2 pages only

    A customer has an invoice report where they want the terms and conditions (which are 2 pages) duplexed while the report itself is not printed that way.  Any ideas if this can be done using native SSRS? Sherry

  • Very Slow EJB Redeployment

    Developers at my company experience the same problem described in this thread, but the thread ends without any solutions or advice. Does anybody know more about why EJB redeployment can take such a long time? I am deploying the application to a singl