I upgraded to Mavericks & have both old & new Pages icon in dock.

I upgraded to Mavericks & got the new Pages with yellow-pen icon, I still have purple ink-well icon...

Hello there, pillfield.
The following Knowledge Base article explains the reasoning behind the older version of the iWork applications not being removed from your computer:
About the new iWork for Mac: Features and compatibility
http://support.apple.com/kb/HT6049
Since features were still to be rolled out:
In the meanwhile, you can continue to use these features by accessing the previous versions of the iWork applications which remain installed on your Mac. The previous versions can be found in Applications > iWork ’09.
If you are comfortable with the new applications and want to delete the older versions of the iWork applications, this article provides some information on how to do that:
OS X Mavericks: Install, update, and uninstall apps
http://support.apple.com/kb/PH14299
You may also want to review this article to remove the Alias of the application from your dock, once you delete the application:
Mac Basics: The Dock
http://support.apple.com/kb/ht2474
To remove an item from the Dock, drag its icon an inch or more off the Dock and wait a couple seconds, then release; the icon will disappear in a poof of smoke. There are some icons that you can't remove from the Dock, such as the Trash and the Finder.
Don't worry, you aren't permanently removing the item from your computer; you simply got rid of its Dock icon. If you want that item back in the Dock, locate the application, file, or folder in the Finder (or with Spotlight), and drag it back into the Dock.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Similar Messages

  • Do I have to remove PhotoShop CC after the PhotoShop CC (2014) upgrade?  I have both copies on my computer at present.

    Do I have to remove PhotoShop CC after the PhotoShop CC (2014) upgrade?  I have both copies on my computer at present.

    http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html
    This messages says (at least some) CC 2014 programs use NEW plugins https://forums.adobe.com/thread/1499663
    -so do not uninstall the older CC programs if you use plugins in your programs until you are sure you have plugins that work in CC2014
    If you are sure you don't need the old CC programs
    -http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall
    -read reply #3 about the ORDER of uninstalling & installing https://forums.adobe.com/thread/1242671

  • I have an early 2008 mac should i upgrade to mavericks have heard some bad reports

    i have an early 2008 mac should i upgrade to mavericks have heard some bad reports

    I have an early 2008 iMac running Yosemite and I am not experiencing any real difficulties. I did upgrade to 6 GB of RAM, which has helped.
    I purchased the RAM from OWC.
    Other World Computing

  • When I upgraded to Maverick, it gave me iPhoto, pages and numbers.

    When I upgraded to Maverick, it gave me iPhoto, pages and numbers.  I already had iWork9.  Now I have both.  Is it safe to trash IWork9?

    Welcome to Apple Support Communities
    I'm not sure if I understood your question.
    If what you want to say is that now you have two copies of iPhoto, Pages and Numbers, it is safe to remove the old version.
    However, respecting to Pages and Numbers, I recommend you to leave the old version. Some users have complained about the lack of features of the new Pages and Numbers version, so you should leave them there in case you need them in the future

  • So I know now that upgrading to 5.0 took away the page icon at top of iPad. But strangely enough it still shows up on iPhone 4 after upgrading. Anyone know why

    So I know now that upgrading to 5.0 took away the page icon at top of iPad. But strangely enough it still shows up on iPhone 4 after upgrading. Anyone know why

    So how can I get it back to where there is a seperate visual thumbnail page of tabs. This new tabs on the top is a big mistake in my opinion. Many times while on a website I have accidentally hit one of the other tabs at the top of the screen and all the sudden I am on a page that was previously open. This new tabs at the top also made the menu bar deeper to accomodate everything that should be on a seperate page like it used to be. It was really great, and not something that had to be improved upon. So is there a way to get the tabs back to where they should be?

  • Mite, I addI just upgrade from Mavericks to Yoseed a new user to my computer , however it doesn't show up at startup. What's going on?

    I just upgraded from Mavericks to Yosemite, I added a new user to my computer however it does not show up on start up.  What can I do to change this?

    If you are in System Preferences > Users & Groups, click Login Items at the bottom of the list of users in the left side bar, and do you have the box checked to show the users?

  • Syst allows, using both old & new tax jurisdiction codes on PO after Vertex

    Hello All,
    We have recent gone for Vertex implementation in our concern and have an interface with SAP.
    Now , after the implementation, system allows me to use both old and new tax jurisdiction codes on POs. This will be an issue so can someone help me and let me know if any note has to be applied or any other solution.
    Thanks in advance
    Arun

    There is difference between old and new Jurisdiction codes because as per Vertex GEO codes to SAP jurisdiction codes, there are 2 differences. 
    1) The first 2 characters in Vertex are the GEO numeric code (i.e. 01 = AL in SAP), and
    2) There is an additional zero at the end of the jurisdiction code in SAP TTXJ table. 
        Example:  Vertex 010030420 equals AL00304200 in SAP.
    Thanks
    Arun

  • I have been with PS since PS 6,7,CS2 andCS5 upgrades. I have bought a new computer.

    I have been with PS since PS6,7,CS2 andCS5. I have bought a new computer. I have long since lost my original disk/packaging. How do I transfer to the new computer.

    Presumably you want to reinstall CS5.
    You can download the CS5 trial from http://prodesigntools.com/all-adobe-cs5-direct-download-links.html
    Ensure that you follow the Very Important Instructions on that page before you click the download links.
    To license CS5 on your computer, launch the CS5 trial, enter your CS5 serial number then enter your CS2 serial number as an earlier qualifying version.

  • Lost new page icon on safari

    There are 5 icons on top left area on safari browser with one of them being the new page option.
    The little icon for new page is missing. Is it something I caused to happen or are others having this issue as well.

    Thanks Joseph. I did see that.
    I still would like to use the icon feature along with the bookmark icon. Is that possible ?
    Also, it works fine on my Iphone which I restored today only.

  • Upgraded osx Mavericks, have LE 9.18, having problems getting signal w/ Profire 610

    Everything looks normal.  Profire shows signal recognition.  Profire mixer window shows signal.   Logic Express shows Profire 610 as an option for audio input and output (which I have selected).  But when it comes to actually getting signal into Logic there is nothing.  (Yes, Input select and Record Enable are chosen).  Everything is how I've had it in the past, but the only difference is I upgraded to OSX 10.9.  Today is the first time I've tried recording since upgrading the OS.  Yeah, I know I'm late to the party.  I've seen lots of people are having similar issues.  Is it LE9?  The M-Audio Profire 610?  Mavericks? 

    Alright, I got the install to go all the way with limited memory (1 stick of 256) but now the initial boot doesn't go without help from a start up disk of some sort. Ran tests with TechTools Pro and seems OK but if I don't start up with a CD and then restart with chosen start-up disk I get a "?" at the boot-up.
    As for the Logic HitKit program, when I was using OS 9.(?) I could substitue my OMS (Open Music System ) and use both modem and printer port MIDI connections. With the new OS 10.2 it seems only one will work at a time. Yes, I need a modern soundcard with MIDI connections but I haven't got back to that point yet since experiencing my many start up difficulties.
    I appreciate everyone's feedback and ideas. Thanks-TopBob
    Message was edited by: TopBob
    I did a CUDA reset before installing the system, and a PRAM reset (keyboard) helped previously, but I remember someone elses post saying a CUDA reset should be done after all hardware changes. Would this include replacing the RAM cards?
    I may want to make sure they are seated correctly anyway.

  • How to modify a template and use both old/new in the same library without interference

    OK first Thank you for reading this and hopefully being able to help me out. I got dumped this project on my desk to update two different templates already published in
    share point(2010) years ago. The original developer left the company 4 years ago. Since then anyone that tried to do anything with them made a big mess. I have done some heavy reading and am stuck on few issues.
    Please note the templates were created IP 2007 and I will be using IP 2007 to modify them. The temples have a small amount of C# that does not have to be changed. There is also a digital signature linked to them.
    After some heavy reading this week. I figured that I need to edit the template from Share point(2010)/IP(2007) and not copy the templates to a different location laptop/desktop
    because that will ruin the digital signature. There is also a large volume of submitted forms from these temples. The new version of the temples will be heavily modified deleting rolls columns changing names. My understanding is that since I want to keep the
    old submitted forms the way they are and still use the old template to open them. I would need a second version of the original template with all the visual modification to still use the original template's C# digital signatures and any other file that runs
    in the background.
    The plan:
    1)Turn off the automatic update to forms/template when a new version of the template is created.
    2) Copy the existing template (.xsn) file to a new document folder in share point(same network).
    3) Change the name of the .XSN file that I copied and modify it??????????? Will keeping the same name interfere with the old template/C# digital signature ect? I would like to change to something like SameName_version_2015 for example. or will changing the
    name cut the link to the old C# digital signature? or will it get modify the background files and break the old template/submitted files.
    4) Publish the new template in share point.
    5) Change the data connection to a new directory that I wish to submit all files.
    Please advice am I missing anything? and help me understand my step 3 better. Also I would love to get a better understanding of how i can backup and recover everything. Do I simple copy unmodified .XSN files somewhere and publish them if things goes wrong?
    Do I need to backup anything else?
    I am open to options if I can create a test folder in the share point for safety.
    Once again THANK YOU for trying to help.

    Hi, thanks for the reply!
    Just to follow up for what we did to disable the delete function for maintaining table records. We hided the Delete button by adding a "MODULE disable_delete" code in Screen Painter. So now only adding records to the table is allowed.
    Thanks,
    Jenny

  • My ebook salesperson tells me I need to run Firefox 3.5. can I have both the newer version and the 3.5 on my desktop at the same time. If not, do you have other suggestions?

    they say i can run 3.5 ONLY.

    Hi
    Your question is more suitable for the 10.4's General Forum rather than 10.4 OSX Server. Post here instead:
    https://discussions.apple.com/community/mac_os/mac_os_x_v10.4_tiger?categoryID=1 77
    You'll have more of a chance of someone responding.
    HTH?
    Tony

  • I updated to a new version of pages and the old icon is still appearing on my dashboard...Where do I find the new pages icon??

    I updated to a new version of Pages but the old icon is still appearing on my dashboard.  I know it updated b/c it shows it did in the app store.  But I can't find the new icon. 

    swpovemba wrote:
    ...in my DOCK...and I found it.  Thank you. 
    You're Welcome. Glad you got it sorted.

  • Importing data from a .txt file and have Acrobat create new pages

    Hi everyone,
    I've created a form in Acrobat 9 to be used as an invoice. I want to be able to import data from an excel spreadsheet or .txt file into all the form fields. I know that I can go Forms > Manage form Data > Import Data to import 1 record at a time, but say I have about 50 invoices to populate, is there a way to import all the records at once and have acrobat create a new invoice for each of the customer's records?
    If there is a way, will it be compatible for Acrobat Reader users since this form will be used by someone who only has the Reader?
    Really appreciate any help.

    Sure.. this is what we use. "New Micro Right Click Tools"
    http://www.nowmicro.com/rct/

  • Have IOS5 and new Pages version. Spell check in French does not work

    Pages works fine on my IPadI, but how can I get it to spell check in French, used to work fine with other version.
    Checked my preferences on my IPad, they are french. What to do?
    Thanks for any help you can provide.

    Checked and yes I did have Pages in French and had the French keyboard checked on my IPad preferences.  Your suggestion reminded me of that "world key". Read something about it, long time ago.  Never used it before but when I taped it, it brought me a choice of keyboards, so now I can go back and forth from English to French on my Pages texts, and all that without going back to my system preferences!
    Thank you for the comment, helped jog my memory.
    Regards

Maybe you are looking for