I upgraded to MFF 4.0.1 and now the browser will not ope, Taskmanager says that it is running.
I upgraded and to newest version and computer froze on checking add-ons and plug-ins. I restarted compter and could not open Mozilla Firefox. So. I removed MFF and went to you website and downloaded latest version. It put an icon on desktop and put MFF under my programs. When I double click on it or click and 'open' nothing happens. Task manager says that the process is running.
If you are working in a a corporate situation - Is anyone around you using Fx4 successfully? If Firefox is permitted you should ask your administrator to make sure Fx4 is cleared by your firewall.
With many "domestic" firewalls you need to give new permission for new versions.
You'll notice in Alice Wyman's article that you can try a version of Safe Mode(I'm not sure whether it disables Hardware Acceleration) if you can get to the first page(after closing down any firefox running via Task Manager) you can try >Firefox orange button >Help >Restart with Add-ons disabled. Then you try her other suggestions.
After that you would probably need to do an uninstall/re-install and try a new clean profile.
Similar Messages
-
firefox is working but does not operate. Other browsers work so its an issue with the upgrade. No error message. what do I do?
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls -
My granddaughter put the Start Up Disk in the drive inadvertently and now the drive will not eject it or start up using the HD. I have tried all of the suggestions for opening it that appear in the manual. Help? It is her computer, a iMac G3 or G4 with superdrive, the one with the ball shaped base. Thank you.
It's a tray loading drive, there should be a little hole next to it, just large enough for a paper clip. Stick the end of the paper clip in it and the tray should open.
Miriam -
My daughter has an iphone 3gs and it required an update. So i connected the iphone to itunes for the update and the iphone locked up . I had to reset the iphone back to factory settings and now the iphone will not activate , Please advise what i can do to get this working for her ?
Generally this is a sign that the iPhone had previously been
hacked/modified/jailbroken and the update relocked it to the
original wireless carrier. If this is the case, only that wireless
carrier can unlock your iPhone. You must contact them to see
if they offer unlocking and if you qualify.
Where did you acquire this iPhone?
What wireless carrier did you use before this problem?
Does the app Cydia appear on your iPhone?
What does it say when you look at Settings=>General=>About=>Carrier?
Unauthorized modification of iOS
http://support.apple.com/kb/HT3743 -
I bought the app Atari greatest hits package for $9.99 and now the app will not even open... Every time I try to open it it closes on its own...any suggestions?
Try deleting it and reinstalling it.
you can also try giving your iPad a reset. Hold down the sleep and home keys for about 20 seconds or so until it reboots and see if that helps. -
hey, i need some help with my iphone 5s, i did the update ios 7.0.6 and now my phone will not power on?? can someone please help me!
Hello ABrosz
If you are not able to get your iPhone to power on, try to reset it by holding the Sleep/wake button and Home button at the same time for about 10 seconds and see if it turns on. Check out the articles below to troubleshoot your iPhone further.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Regards,
-Norm G. -
HT5457 I have added this latest download to my iPad and now the iPad will not respond
I have updated my iPad with the latest version iOS 6 download and now my iPad only has the Apple icon displayed. I have attempted to to hold both buttons at the same time and the screen bounces a strange lined gray pic for seconds and bounces back to the Apple icon. any ideas why the iPad will not respond?
I have updated my iPad with the latest version iOS 6 download and now my iPad only has the Apple icon displayed. I have attempted to to hold both buttons at the same time and the screen bounces a strange lined gray pic for seconds and bounces back to the Apple icon. any ideas why the iPad will not respond?
-
HP Photosmart Premium ePrint Wireless Model C410a.
Mac OS
I just hooked up a new router-Amped. Now the printer will only work with a "wire" and not wirelessly. It worked with my previous NetGear router.
What do I need to do to get it to work?Your new router is likely using a different subnet than your old router. Go into the printer's wifi settings and make sure it is in the same lan as your router. Follow the printer's wifi set up instaructions.
-
Just updated my 4s to iSo 6 and now the phone does to pair with my Lexus anyone have/solve this issue? Is it a firmware problem with the car?
Was it pairing before the iOS update?
If so, delete the pairings in the device and the car, then try again.
If it was not, the issue is most likely the car. -
Just tried to upgrade to SnowLeopard with newly purchased software disc. iLife failed to download and when I tried to restart the computer, it will not do so--just get a grey screen with the lines going around and around. Any ideas about how to get it to start?
Mac Pro - Mid 2010
Processor 2 x 2.66 GHz 6-Core Intel Xeon
Memory 8 GB 1333 MHz DDR3 ECC
Graphics ATI Radeon HD 5870 1024 MB
Software Mac OS X Lion 10.7.2 (11C74)
This is a brand new machine that I just purchased from Apple. It was delivered yesterday
The old computer is an old PowerMac G5, but my OS X install disc is a retail version of 10.5.
I also tried the OS X 10.5 install disc that came with my MacBook Pro (2.6 Ghz Intel Core 2 Dual).
Same issue - nothing but a grey screen when the system tries to boot from the DVD -
I've upgraded my Mac OS to Yosemite and now Illustrator CS4 will not open.
I'm guessing I am too far behind to upgrade to the latest version of Illustrator and I also am not really clear on using Illustrator in the cloud but I need to work on my existing CS4 files so not sure what to do. Any help would be appreciated!
j,
You may prevent/deal with the error message as long as Illy is open in the following way:
1) Start up Photoshop first, then Illy;
2) When the error occurs, click Don't show again, and click OK;
You may close down Photoshop after that.
If you get the error message without having Photoshop open, close down Illy and start with 1).
By the way, I believe the right order/way is to update the OS, then reinstall the applications. Was that how you did it?
Also you may need to update drivers (Wacom and others).
If you run into the Java issue, you should be able to get round the issue altogether without the legacy version (and its security implications), by following this:
http://oliverdowling.com.au/2014/03/28/java-se-8-on-mac-os-x/
It is even more thoroughly described in this thread, see post #3 on by gator soup:
https://forums.adobe.com/thread/1706469
I hope this covers all eventualitites. -
I upgraded to iOS 7.0.4 and now my phone will not pair with my car's bluetooth.
I reset my iPhone settings - didn't work. Called both subaru and apple support who just point fingers at each other. Any tips on a fix would be great!
I had the battery problem. I upgraded the to iOS 5.0.1 last night and at least that problem seems to have been fixed. However, the problem with no audio on phone calls remains. Have not tried swapping the SIM card yet. The ATT guy says that they have resolved 90% of the no audio issues with a new SIM card. Not sure athat what has to do with anything but will try that first before requesting a replacement phone.
-
After the firmware was upgraded the artwork does not appear on my ipod? How do I fix this?
Try looking at the previous discussions with your same problem. Like the ones on the right-hand side of this page under the heading "More Like This".
-
I have an iPhone which I added my email address as my apple ID. I have just purchased an iPad which I add my other email address by mistake and now I am unable to stream my photographs. I have tried to change my email on both devises but with out luck as it won't reconise my pass word. Any ideas
Settings>iTunes & App Stores>Tap the ID and sign out. Then sign in with your other ID.
If this isn't working, restart the iPad - AFTER you sign out of the ID and then sign in with the correct ID after the iPad restarts.
There is no reason why you should not be able to sign in with the ID that you are using on the iPhone and use that passord with that ID on the iPad. -
The Iphone "Iphone" could not be restored. This device isn't eligible for the requested build. Then I am given the option to click "More Information", or Ok. I have followed all of the necessary steps, but I haven't had in suecessful trials. Will someone PLEASE help, I am REALLY ready to use my fricken 280 Dollar Iphone! Lol. Thanks.
Bad news: It sounds as if you were sold a jailbroken iPhone.
Good news: File a SNAD with eBay. Make sure all your correspondence has been through eBay Messaging. The fact that the seller has been ignoring you will not sit well with them.
You will get 100% of your money back, including shipping. Paypal will simply seize his funds and return what is yours.
Lesson: Don't buy a used iPhone.
It's much worse for the seller. His PayPal and eBay accounts will be frozen. Until he squares up with both you and eBay, he's out of money and out of business.
Maybe you are looking for
-
LDAP setup with SSL - Can't use tls auth type
I'm trying to configure Solaris 10 to use ldap against my OpenLDAP server with SSL but whenever I try to set the authentication as tls:simple, it gives me an error : # ldapclient mod -a authenticationMethod=tls:simple Cannot specify LDAP port with tl
-
Setup Overview: VoIP using digital T1 CAS connected to a PABX Issue: PABX is not receiving DNIS and ANI information Running Config: (for Site A and Site B) Site A: controller T1 2/0 framing sf clock source line primary linecode ami ds0-group 1 timesl
-
AIA Emulators for OSM, error connecting bridges
The AIA Emulators to Support the OSM Testing were created by using the ANT Scripts supplied with the OSM installation. The script execution was complete with SUCCESS without any problems, it created the Queues and Bridges necessary, but the server is
-
Plz help ! how do i restore songs from another itunes library?
Okay, yesterday i charged my ipod in my mac laptop and this morning my brother pulled it out. then my ipod would turn on and the wire icon just kept appearing on the screen of my ipod. once i put it in my laptop my ipod froze and the only way any son
-
Help~Help,about agent question
Hi , I'm using BIEE11.1.1.6.0, when I using agent to sent email,I faced a problem. the BIEE login security authentication by external table, If one user 'test' in table,its email is '[email protected]', I login in analytics by 'test' and set email in