I upgraded to Mountain Lion (MacbookPro). Now when I open ical I get a popup window with a list I had added to Reminders app with the message 'Your calendar couldn't be refreshed' it won't go away-'delete' is greyed out-can't access calendar! Help!

I upgraded to Mountain Lion (MacbookPro). Now when I open ical I get a popup window with a list I had added to Reminders app with the message 'Your calendar couldn't be refreshed' i--t won't go away-'delete' is greyed out--can't access calendar! Help!

I upgraded to Mountain Lion (MacbookPro). Now when I open ical I get a popup window with a list I had added to Reminders app with the message 'Your calendar couldn't be refreshed' i--t won't go away-'delete' is greyed out--can't access calendar! Help!

Similar Messages

  • HT3805 I recently upgraded to mavericks on iMac . now when i open aperture I get the message"aperture cannot access this library. to use this library, make sure its file permissions are set correctly" I have repaid permissions via the aperture first aid.

    I repaired the permissions in aperture first aid. I notice my short user name has changed from the one before the mavericks upgrade.

    I notice my short user name has changed from the one before the mavericks upgrade.
    Then you created a new user account when upgrading. How did you upgrade? Did erase the system and set up your mac completely new? If your short user name has changed, you are no longer the owner of your Aperture library, if it ha been created with your old user name.
    I repaired the permissions in aperture first aid.
    And after repairing the permissions you can still not access it?
    Where is the library located? On an external drive or in your Home folder?

  • Aperture running in Mountain Lion. Now when I start Aperture it asks me for a Serial Number . Where can I find this as it was a download and I have no packaging?

    I recently purchased Aperture from App store and this was running fine until I upgraded to Mountain Lion. Now when I start Aperture it asks me for a Serial Number . Where can I find this as it was a download and I have no packaging?

    I also have this problem! Mine is also not from the App Store. I had purchased Aperture 1, then upgrades for both version 2 and version 3. It's annoying as it is, but I also have to enter my previous serial number as well since it was an upgrade.
    Following this thread in the hopes that someone will have a solution.

  • I did have the ability to "save" in PAGES. I upgraded to "Mountain Lion", and now I can not "Save". Help please!

    I used to be able to "Save" my material in PAGES. I upgraded to "Mountain Lion" and now when I go to "Save", it says "permission denied". How can I correct this?
    <E-mail Edited by Host>

    Several users have had this problem in Mountain Lion. The system has decided you don't have read/write permissions. Have you done any updates to your system lately? Using Disk Utility to repair permissions after any upgrade or update, especially to the system, is a good practice. So first, I would repair permissions & then if you still have the problem, locate the file in Finder & go to File > Get Info & look in the Sharing & Permissions section. You should be the only one with read/write permissions but something has happened. Click on the words under "priveledge" next to your name & change it to read & write. You will probably have to enter your admin password.

  • I upgraded to Mountain Lion and now I can't use any of my software!

    What a disaster and huge mistake.  Upgraded to Mountain Lion and now I can't run Autocad 2012 for Mac, any of my Adobe Creative suites software such as Photoshop, Illustrator.. and now I can't even do upgrades because Mountain Lion doesn't allow me to launch DMGs.  I've lost thousands of $'s in software, not to mention time, but most importantly now I can't even work!  I just tried to revert back to Snow Leopard by intalling it back in my hard drive and it won't let me.  I never used Time Machine.  Is there any way on earth I can revert back to my old operating software???  Please help.  And if you haven't upgraded yet and are thinking about it.  BEWARE - and don't do it.  I've been reading that Mountain Lion isn't working with Microsoft applications either.  Omy...I haven't even checked that. 
    and of course no one at Apple support can or will help me

    lunaulu wrote:
    It's not my Microsoft that I use much or am worried about.  I can't run AutoCAD.  and I can't update AutoCAD either.  When I try to mount an update just to get it working, it says it can't run the DMG file.  Apparantly this new platform doesn't use Rosetta - which is needed to run any of these updates or downloads.  ***?  and then When I try to open CS4 appliations - Adobe Photoshop, Illustrator, or InDesign - I get the message "Licensing for this product has stopped working - Error 150:30 - ***? 
    So basically I can't use ANY of the programs I ran before.  And yes I have googled desperately all day.  Adobe has some suggestions - like deleting a Flex files - which I did...Defragmenting - which I did.  And most importantly provides am Adobe Licensing Repair tool to fix - which I can't open because Mountain Lion won't mount the DMG in order to run it!  It's a complete disaster and I don't have the money or time to purchase and or reinstall everything.  I am just screwed. 
    No you are not, calm down, cbs20 already gave you the answer on opening dmg files, updates are available for most of your programs and I assume you have licenses for the Adobe products. AutoCad you'll have to wait for.
    And please .... Start Backing Things Up, you could lose it all without one, work included.

  • I've reset my PPAM before to get around Firmware lock, but I've upgraded to mountain lion and now need to do the same thing, but I can't reset the PRAM. I've heard of the chip that is on the post 2011 macs, but I must not have one? What to do?

    I've reset my PPAM before to get around Firmware lock, but I've upgraded to mountain lion and now need to do the same thing, but I can't reset the PRAM. I've heard of the chip that is on the post 2011 macs, but I must not have one? What to do? Also, I can not get start up chimes unless I have the factory startup disk in. Can the PRAM be reset with the factory startup disk in or must the mac boot from the hard drive? Need help.

    Help for forgotten passcode >   iOS: Forgotten passcode or device disabled after entering wrong passcode
    When you have access to your iPhone again, FaceTime is a pre installed app that cannot be removed.
    Try a search >  iOS: Understanding Spotlight Search

  • I upgraded to Mountain Lion and now see "Blocked plug in" on my banking site and on Facebook I can't watch a posted video

    I've upgraded to Mountain Lion and now see "Blocked plug in" when on my banking site and also when on Facebook.  I've been told Adobe Flash is not a good option, any suggestions?

    cin2 wrote:
    I've been told Adobe Flash is not a good option, any suggestions?
    Told by whom? Works here with all my sites.

  • I upgraded to Mountain Lion and now I can not use Mac Office

    I updated to Mountain Lion and now Microsoft Office does not work

    Greetings,
         What you posted is rather vague. By doesn't work do you mean the applications don't open at all or are you getting a message stating that your product needs activation? If it's product activation then that is something that Microsoft will have to assist you with. If your problem is that the applications simply won't open you may have to uninstall and reinstall Office again. This is common on the Windows platform too. Rarely when you upgrade to a new OS Office sometimes has an issue with the upgrade and won't open correctly. I would suggest merely uninstalling and reinstalling. Nine times out of ten that helps.

  • I upgraded to mountain lion and now have nothing in itunes, why

    i upgraded to mountain lion and now have nothing in itunes, why

    About TM "Backup Drive is Full"
    Alert TM only deletes older files if they have been deleted from the source and when TM needs space on the backup drive for a new incremental backup. Time Machine "thins" it's backups; hourly backups over 24 hours old, except the first of the day; those "daily" backups over 30 days old, except the first of the week. The weeklies are kept as long as there's room.
    So, how long a backup file remains depends on how long it was on your Mac before being deleted, assuming you do at least one backup per day. If it was there for at least 24 hours, it will be kept for at least a month. If it was there for at least a week, it will be kept as long as there's room.
    Note, that on a Time Capsule the sparsebundle grows in size as needed, but doesn't shrink. Thus, from the user's view of the TC it appears that no space has been freed, although there may be space in the sparsebundle.
    Once TM has found it cannot free up enough space for a new backup it reports the disk is full. You can either erase the backup drive and start your backups anew or replace the drive with a larger drive.

  • I recently upgraded to mountain lion and now cannot connect to my Brother QL-570 Label Maker

    I recently upgraded to Mountain Lion and now cannot print out on my Brother QL-570 printer. I get as far as typing in the label name and then the labeller or computer disconnect. I have tried downloading drivers from Brother but they can't do that as only Apple can do that but there is nothing in Apple to do that. I also reloaded the program off the set up disc. . Any ideas?

    yeah-find out where you're downloading stuff to, and stick with it. I'm using FireFox and tell it to save the driver and stuff on the desktop, and when I quit FireFox, there it is on the desktop. you'll also need your admin password. It should show up as a .dmg file, then double-click on it to open it. You should see "Brother.pkg" . start up brother.pkg (double click??) and folow the instructions that ought to appear to install the printer driver.  If the .dmg file doesn't mount, use Disk Utility** to mount it and get it working. Then you should see the package.  and then you can install it.
    ** you may have to click on the .dmg file and choose "Get Info" then Open with, then choose disk utility, and then open with then change all. then close it. Hopefully that ought to work. If you cannot remember your admin password, I can't help you right now. Looks like you'd need it, to let Brother install that printer driver.
    well, enough for tonight
    if this didn't help you, then ask me again tomorrow
    John b

  • I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light.

    I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light. Can anyone who has made this change offer some advice?

    apikoros wrote:
    The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
    1)  I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access.  But do I have to  change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
    Resetting the password you will need to do for each device... the utility cannot even see those old units.
    So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
    2)  Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
    N.Korean hackers.
    [Edit] Whoops-- one more question:  I want to partition the TC's disk, but Disk Utility doesn't see it.  What do I need to do?
    You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
    Look at Q3 here.
    http://pondini.org/TM/Time_Capsule.html
    Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

  • I upgraded to mountain lion and now iMovie dose not see my Canon XHA1 . Can anyone help?

    I upgraded to mountain lion and now iMovie dose not see my Canon XHA1 . Can anyone help?

    I upgraded from the app store. It is actually quite awhile ago so I do not remember how. I think I used a thumbdrive to create some type of file. No I do not have any backups. My iLife CD is nowhere to be found because this is a very old macbook pro that I've had for a couple years.
    Thanks for taking the time to help

  • I have 2nd generation apple tv, and this has always worked well with Lion, have now upgraded to Mountain Lion, and now can not connect to itunes, all other things work, can buy or rent films.

    I have 2nd generation apple tv, and this has always worked well with Lion, have now upgraded to Mountain Lion, and now can not connect to itunes, all other things work, can buy or rent films, but can not listen to my music or show photos. Can anybody help please?

    I have 2nd generation apple tv, and this has always worked well with Lion, have now upgraded to Mountain Lion, and now can not connect to itunes, all other things work, can buy or rent films, but can not listen to my music or show photos. Can anybody help please?

  • Updated to Mountain Lion and now when I download a purchased program nothing happens (it jumps to downloads but doesn't open)

    I've updated to Mountain Lion and now when I download a purchased program nothing happens (it jumps to download but the download will not open?)?

    Hi, Thanks for responding.  Most downloads you can double click and/or drag over to applications for it to actually install however this one you can't.  It just acts like an empty folder and does nothing.  I did update to Mountain Lion recently and wondered if it was incompatible or something or if I was doing anything wrong?  Thanks.

  • I just downloaded Lion.  Now when I open Safari, it automatically opens to the last page visited.  How do I reset it to open to a blank page as it did previously?

    I just downloaded Lion.  Now when I open Safari, it automatically opens to the last page visited.  How do I reset it to open to a blank page as it did previously?

    Dealing With The Resume Feature of Lion
    Managing Mac OS X Lion's application resume feature.
    If you shutdown your computer you should get a dialog asking if you want applications to resume on the next startup. Simply uncheck the box to prevent that from occurring. Open General preferences and uncheck the option to Restore windows when quitting and re-opening apps. You can also install a third-party utility to control resume features on individual applications: RestoreMeNot or Application State Cleaner.
    It is possible to completely stop the Resume feature although I'm unconvinced that it is that annoying. Nevertheless see the following:
    If you have not yet done so you must first make your /Home/Library/ folder visible. Open the Terminal application in the Utilities folder. At the prompt paste the following command line:
    chflags nohidden ~/Library
    Press RETURN. Quit the Terminal application.
    In the Finder navigate to the /Home/Library/Saved Application State/ folder. Delete the contents of the folder. Back up to the /Home/Library/ folder. Select the Saved Application State folder. Press COMMAND-I to open the Get Info window. In the Sharing and Permissions panel at the bottom click on the lock icon and authenticate. Set each of the listed entries to Read Only. Close the Get Info window.
    Quit all open programs except the Finder (this is very important.) Next, navigate to the /Home/Library/Preferences/ByHost/ folder. Look for a .plist file with "com.apple.loginwindow." in the file name followed by some numbers in hexadecimal. Select the file. Press COMMAND-I to open the Get Info window and in the Sharing and Permissions panel click on the lock icon and authenticate. Set each of the listed entries to Read Only. Close the Get Info window. If you also find a file with the same filename but with a last extension of ".lockfile," then you should delete it.
    The above should eliminate the Resume feature system-wide. Note that any future system updates or upgrades will likely undo these changes. You will then need to repeat this procedure assuming there are no major changes in OS X related to it.

Maybe you are looking for