I upgraded to snow leopard 10.6.3 but it is not showing up...?

So I upgraded to Snow Leopard 10.6.3 with the install disc and I'm pretty sure it installed properly since nothing came back about a failed installation but when I go to look at "about my mac" window it still says I'm running 10.5.8. I don't know if it actually worked or not now. Is there something else I need to do? Is there something I've done wrong?
(I do have the intel processer so I know I can upgrade to snow leopard)
my goal is to eventually upgrade to mavericks at some point,which is supposedly possible through snow leopard.
Thanks so much for any possible help,much apperciated!

Please do this:
Repair the Hard Drive and Permissions
Boot from your Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and quit the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Upon satisfactory completion boot from your Snow Leopard DVD and resinstall Snow Leopard. Upon completion you may wish to update it to Mac OS X 10.6.8 Update Combo v1.1.

Similar Messages

I just upgraded to Snow Leopard on MacBook and my ipad2 is not being recognized in ITunes 10. I can't sync. Options?

I tried to restore the iPad2 in safe mode (holding the button while connecting to iTunes), but computer wanted to download ios5, which then kept timing out. I'd like to take one problem at a time. Can I get my iPad2 recognized in iTunes after Snow Leopard upgrade before going to ios5?

Can you easily do this with Mac mail?
Yes you can.
Open Mac Mail. From the menu bar click Mail / Preferences then select the General tab.
Then select Accounts from the menu then the Account Information tab.
Click + (plus) under the Accounts window on the left.
Enter your name, your Gamil user name and password then click Create.
To start a new mail window, from the menu bar click File / New Message
Click the pop up menu next to: From
Select your Gmail account.
Click Attach form the new mail message window to include photos or links or just drag items to the window from your Desktop.

After i have upgraded to snow leopard my copy and paste commands are not working

hello, i am very frustrated now, it's been two weeks since i have upgraded my mac os to snow leopard but the copy and paste commands are no longer working. i have searched thru the communities but i cannot find something that answers my query. please help as i do not want to resort to downgrading back my OS. thanks in advanced.

Maybe here http://support.apple.com/kb/HT3964
If you do not have a removable battery
power down, power back up and hold the following keys, left side shift, control, option. Hold these keys till the gears stops spinning, release. Reboot.

Mac Pro Snow Leopard Display will Sleep but Computer will not Sleep

Equipment:
Mac Pro Tower
Snow Leopard 10.6.8
30" Cinema Display
The computer has not been able to fully go to sleep since I bought it. (A refurb, but not from Apple's refurb store.)
As the title says, the display goes to sleep but the computer is still on. (Whether I select Sleep from the Apple menu, or with a keystroke.)
"Wake for network access" is not checked in the System Prefs.
I've disconected everything (inc. the monitor) from the back of the computer and the computer still won't go to sleep.
Reset PRAM and the "System Controller (the move where you power down, unplug the computer, press/hold the powder button for 5 seconds, plug in computer and start up).
I installed the PleaseSleep and the DeepSleep apps, but still no-sleep.
From Console, for the Sleep command:
11/6/12 4:51:32 PM
configd[15]
Sleep: Success - AC - Software Sleep
com.apple.message.domain: com.apple.powermanagement.sleep
com.apple.message.signature: Success
com.apple.message.value: 1
com.apple.message.result: Success
com.apple.message.uuid: A3270153-6D75-4639-8125-3B105B537BCB
Then from when I touched the keyboard to "wake":
11/6/12 4:51:32 PM
configd[15]
Wake: Success - AC
com.apple.message.domain: com.apple.powermanagement.wake
com.apple.message.signature: Success
com.apple.message.uuid: A3270153-6D75-4639-8125-3B105B537BCB
com.apple.message.result: Success

"I was not able to use the system disks 'cos the image on the screen appears completly distorted and i am not able to navigate the menus."
Never ran across that type of problem on Apple's message boards.
"I have temporarily fixed that using a ten days trial version of SwitchRes X. Everything works fine now but the Display preferences panel from MacOs, wich stays "in coma"."
In that case, are you now able to boot off your install DVD? If so, run the +"repair disk"+ option, when done boot back to desktop & run repair permissions.
"So i guess it's not a hardware problem, but a Snow Leopard Problem."
Post in the Mac OS X v10.6 Snow Leopard Forums where the SL users hang out at.
!http://i50.tinypic.com/izvwo1.gif!

How to set up LPD printer properly? I just upgraded to Snow Leopard from 10.4. I can not get my laser printer to work.

OK, here is what I have found. Since the printer is on an ethernet network it can not be seen since there is no more apple talk. I must set it up as a LPD printer. Xante tech support has told me how to do this but they are baffled by the fact that it will not print. I am using a Linksys wireless/broadband router.
These are my numbers:
IP 192.168.1.110
subnet mask: 255.255.255.0
Router: 192.188.1.1
DNS Server" 66.103.237.2.66.103.251.130
Xante has suggested using 192.168.1.112 and the printer is found and the print queue is opened and the following message is in the print queue window: Network host '192.168.1.112' is busy; will retry in 10 seconds... Nothing ever prints.
On this list I have seen a successful connection in the past through an airport connection. I think that the number that Xante has suggested is not correct.
I am able to print to this printer through another computer on the network that has not been upgraded to Leopard.
Any thoughts? Thanks

The best answer to this question requires a little more digging.
More specifically, what spare inputs do you have on the TV, and what video card are you currently driving.
IMHO S-Video is going to give you about a poor a picture as you can get, mostly because of the limited bandwidth and the fact it's based around standard resolution TV (e.g. NTSC signaling).
The best experience would be via HDMI, but for that you'd need a video card with a DVI interface, plus a DVI -> HDMI cable. If you don't have a DVI-based video card and you're OK spending a few dollars that would be your best bet, although off hand I don't know specifically which card you'd need - most of the modern cards are PCI-X or PCIe and won't work in the G4.
If you don't want to replace the card then you'll need to let us know what kind of video card you have in it so that we can find the best match.

Mail Notes "Hidden" after upgrading to snow leopard

I have a ton of "notes" in my mail program and after I recently upgraded to snow leopard, none of them appear under my "Notes" mailbox. However, they do still exist in the my inbox when I search for them (since whenever a new note is created or edited, it appears as a new email). So in other words, my notes are not gone, they just don't show up in my notes box. Does anyone know how to make them reappear in there? Thanks

Quit Mail and try trashing the ~/library/caches/com.apple.mail folder then restart, empty the trash and relaunch Mail. Might work. I've had success with this when the trash is "hidden"

Upgraded To Snow Leopard And Now The Mic Is Not Working

I upgraded to Snow Leopard, and now my mic input is not woking on my 2 year old MacBook Pro. Can you tell me how to fix it?

Dainis,
Welcome to Apple Discussions!
You haven't provided much information so there is no way for us to trouble shoot your issue. I'm guessing you plugged a mic into the port, if so go to manufacturer of the mic's web site and see if that device is Snow Leopard compatible. Otherwise our hands are tied on how to help you.
Regards,
Roger

Upgrade to Snow Leopard has killed wifi usability

Upgraded to Snow Leopard a couple of days ago and it has significantly impacted my ability to use WiFi, tried on 3 different networks; 2 personal and one carrier and I am either unable to connect or the connection falls out after a few minutes, and when it works the speed is significantly regraded.
Prior to the upgrade I've never had a problem on these or any other wifi networks. Have tried all the proposed solutions I've found on the discussion forum but nothing seems to permanently resolve the issue.
Looking for some new suggestions or a solution from Apple. Being tethered via an ethernet cable seems so old school!

I seem to be having a similar problem but the only option I have is automatic channel selection.
I have a mini with a quickertek nCard in it running at 5 Ghz. Under Leopard I could move it downstairs and everything works great. As soon as I upgraded to Snow Leopard it would no longer work downstairs (signal shows full strength though) but will still work upstairs. Something in Snow Leopard is interfering with performance of the 5Ghz band at a distance. Very frustrating. My only option now is to get the latest Airport Extreme and hope it does better because of its 802.11n at a distance improvements.

Can i upgrade from snow leopard to mountain lion and stay with iTunes 10.7?

I woukld like to upgrade from snow leopard to mountain lion but i don't want the new iTunes 11. Is this possible?

Welcome to Apple Support Communities
Of course. Open the Mac App Store and purchase OS X Mountain Lion. Make a backup of your files with Time Machine and check that your applications are compatible > http://www.roaringapps.com
To upgrade to OS X Mountain Lion, you should have at least 4 GB of memory. You can check the amount of RAM you have in  > About this Mac.
OS X Mavericks will be launched in weeks and will include new features > http://www.apple.com/osx/preview

Will not upgrade from snow leopard

have snow leopard 10.6.8 but it will not download mountain lion what could be the problem?
Have and Imac

Your iMac needs to meet the technical requirements and then you have to buy it from the App Store.
http://www.apple.com/osx/specs/

Upgraded to snow leopard, now safari scrolls a page down when space bar is hit and sometimes crashes. Any ideas for a fix?

I just upgraded to the new snow leopard, now my Safari is acting loopy. At times, the page will scroll down when I hit the space bar. As I type this discussion the screen isn't paging down, but if I go to the tab where I have facebook loaded and hit the space bar, it acts as a page down key. I've had safari crash about 5 times tonight for no apparent reason. The delete key sometimes will act as a page back key. I really have no idea whats going on.
I've had keyboards go wacko on me before due to something being spilled on them or a wireless problem, but this keyboard is a wired keyboard and nothing was spilled on it. It's rather new and I'm quite certain it's not a keyboard issue.
No settings have been changed on the computer. The only thing different today from yesterday, is the fact that I upgraded to snow leopard.
Help would be pretty sweet.
Thanks,
Jason

I just upgraded to the new snow leopard, now my Safari is acting loopy. At times, the page will scroll down when I hit the space bar. As I type this discussion the screen isn't paging down, but if I go to the tab where I have facebook loaded and hit the space bar, it acts as a page down key. I've had safari crash about 5 times tonight for no apparent reason. The delete key sometimes will act as a page back key. I really have no idea whats going on.
I've had keyboards go wacko on me before due to something being spilled on them or a wireless problem, but this keyboard is a wired keyboard and nothing was spilled on it. It's rather new and I'm quite certain it's not a keyboard issue.
No settings have been changed on the computer. The only thing different today from yesterday, is the fact that I upgraded to snow leopard.
Help would be pretty sweet.
Thanks,
Jason

I upgraded to Snow Leopard, made a change to Address Book that I need to correct, tried to use Time Machine to find the prior version and it keeps pulling up the later ones info. How do I use Time Machine to restore Address Book from a few hours ago?

This morning, I upgraded to Snow Leopard from v10.5.8. Then, I exported 11 contacts from our old Now Contact database, intending to import that info into Address Book. It was an experiment, as we have 1199 contacts in 20+ categories and want to eventually get them into Bento from Address Book. The export automatically created a file called Export.vcf on the desktop, after I highlighted the 11 contacts. I tried to look at the info, but when clicked it opens Address Book, which then simply asked if I wanted to import the 11 contacts to it. I clicked yes. Then in checking Address Book 7, not 11 contacts appeared. I clicked on "All Contacts" and there were 1630. We only have 1199, so where did the extra 400+ come from? Since I had already clicked twice on the Address Book window, I couldn't undo the import. So I thought 'Ok, I'll trash Address Book and go to Time Machine, find Address Book, go to right after the upgrade to SL, hit Restore and bingo. Nope. I keep getting the post-import info, not pre. Con someone direct me to a solution? I want to get rid of the import contacts plus the extra 300 or so ( I already had a hundred or so in several categories)? Then, I need to figure out (1) why ALL the old records were exported from Now Contact, (2) where they were hiding in that .vcf file when Address Book recognized that I only wanted to export 11, (3) why Address Book showed only 7 imports in the "Last Import" group, but showed ALL my contacts in the "All Contact" group, even though they should nearly all have been safely untouched in the Now Contact DBase file. PS, I am not especially computer savvy. Thanks for any enlightenment.

Booting From Snow Leopard Installer Disc
1. Insert Snow Leopard Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple logo appears.
5. Wait for installer to finish loading.
Drive Preparation and Installation
1. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. After formatting is complete quit DU and return to the installer. Install Snow Leopard.

I have a Mac mini OSX 10.4.11 Intel Core Duo, 512mb, 1.83 GHz with iTunes 9.0.3. What steps do I need to take to get my music library to my iPad. I dont think I meet the requirements to just upgrad to snow leopard and/or lion. I want the music I paid for

I have a Mac mini OS X 10.4.11, intel core duo processor (not core 2 duo), with 512 mb and 1.83 GHz processor. I only have version 9.0.3 of iTunes because it hasn't let me go higher, which I believe is because of the operating system. I want to get my purchased music from the Mac mini to a different computer (that has the latest version of iTunes) and also my iPad. The Mac mini does not meet the requirements listed to simply upgrade to snow leopard or lion. As far as I can tell. Forgive me if I am lacking here...this is new to me. What can I do to get the music transferred. I have invested alot of money over the past few years on all this music that I should be able to transfer. Thank you in advance if you can help me.

If you want to sync it to the iPad from that Mac, you need to upgrade it to at least 10.5.8.
If you want to copy the music to another Mac, you don't. Move the iTunes folder of the item in the Finder's sidebar over as you would any other folder. If you put it somewhere other than the Music folder, launch iTunes with the Option key held down and point it to that location.
(61713)

Sleep indicator light not working after upgrading to Snow Leopard

Hello all, I recently upgraded to Snow Leopard on my mid-2007 Macbook Pro (Macbook Pro 3,1, 2.4Ghz Core 2 Duo, 4GB RAM) and after the upgrade the sleep light no longer comes on when I shut the lid or when the display is powered off.
Not a huge deal, but might be an issue if I can't remember if I shut the computer down or put it to sleep last—I did not do a clean install, but would anyone happen to know something I could try before resorting to that?
Thanks, your help is much appreciated!

Have you tried Resetting the System Management Controller (SMC)?
cornelius

I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.

I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.
Help!
Thanks, Mark

Unfortunately, the error message gives no details about what codec might be missing or what it needs.
If the file can't be opened in QT, it only means you cannot use the QT "Inspector" window to check what compression formats were used to create the file. It does not mean you can't use the Finder "Information" window to check on the compression formats or use a third party media information window (e.g., like VLC which will open many compression formats not supported natively by QT) to determine what kind of data is included in the MOV wrapper. If the file cannot be opened in any app, it is usually a good sign that the file itself is corrupted.
It's a stupid error message. Apple should do better than that.
Error trapping is quite extensive but there are still many areas which require human oversight. The message is telling you that either the container has a problem (e.g., not properly terminated, non-standard, or corrupted) or that one or more of the compression formats used is not supported by your current codec component configuration or that the data was encoded using non-standard settings or preferences not supported by QT or that the fourCC code does not match the data contained in the file or that there are timecode inconsistencies, etc., etc., etc. In short there are a near infinite number of possible problems for which it would be very difficult/nearly impossible to program error trapping depending on your sourcing of content and how you process it before it reaches the player app. Think of it like trying to play a BD disc in an DVD player.
I'll call Apple support when I get a chance.
Chances are good that they will end up sending you back here. In any case, it is often a good idea to post a sample file for examination by other QT users. At the very least, they should be able to tell you if the sample file will play on other systems which would indicate whether or not the file itself is bad and under the best of circumstances whould allow them to examing the file in detail for various common problems.

I upgraded to snow leopard 10.6.3 but it is not showing up...?

Similar Messages

Maybe you are looking for