I upgraded to snow leopard, since then safari does open in the dock but does not load as set in my preferences and the title page remains blank even though I have set-up a home page. I completely re-initialised safari, but no change.

I upgraded to snow leopard, since then safari does open in the dock (white dot) but does not startup as set in system preferences. Also, if I open safari, the title page remains blank even though I have set a home page under safari's preferences. I re-initialised safari, but no change.

Having put my home-page under "new windows open with home-page" solves the "blank title page problem".
One problem left: "safari" does not startup automatically as set in system preferences, whereas "mail", also set for startup DOES startup

Similar Messages

  • When using my new nano 7 with nike , my music stops after the 30 minute voice alert even though I have set my run for over 30 minutes.It cancels/deletes my run/workout when the music stops.This has happened several times.How can I keep this from happening

    When using my new nano 7 with nike+, my music stops after the 30 minute voice alert even though I have set my run/workout for over 30 minutes.  It also cancels/deletes that run/workout.  This has happened several times.  How can I keep this from happening?

    If possible I would arrange for a good service center to go over it. Hopefully they have a variety of parts in stock. They can test and verify all is working. The previous attempts are based on guesses by the person at the other end of the phone without diagnostic tests to assess the culprit. It is extremely unlikely for a webcam to fail & for it & a Mic to fail together should be an indicator to a good technician it is something else. EG Motherboard
    Take it to a servicing dealer and wait for it.
    T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
    Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
    Windows 7 Home Prem - 64bit w/8GB DDR3

  • How can I save the order of photos in albums? Even though I have set as album order they revert back

    How can I save the order of photos in albums in Elements 11? Even though I have set as album order they revert back to original order.

    Could you confirm that when you re-open the sorted album, the display order on the top bar just over the browsing space is still in 'album' order ? That order may have been changed to a date order. For me, I get the order of the last album I opened, not necessarily the 'album' order of the present album.

  • I am trying to download mountain lion but the pc goes to sleep and stops the download even though I have set my power defaults to 3 hours

    I am trying to download mountain lion but the pc goes to sleep and stops the download even though I have set my power defaults to 3 hours

    aldofromwilts wrote:
    I am trying to download mountain lion but the pc goes to sleep and stops the download even though I have set my power defaults to 3 hours
    Try setting the Energy Saver to "never" and uncheck "put hard disks to sleep when possible". You can allow the screen to sleep after any suitable time.
    Hope that helps. Regards.

  • I've upgraded to Snow Leopard, Aperture 3 won't open.

    I've finally upgraded to snow leopard (hoping the bugs would all be worked out!)  Aperture 3 won't open.  I did the "fix" found under aperture support.  However, the advised,  3.1.1 update for aperture won't open either, saying it I need to install aperture 3 first (it is installed!)  help please....

    Please see this thread and do follow all the instructions.
    Just upgrade to Snow.  Now Aperture 3.1 will not start.
    I know you have Aperture 3 installed and feel its silly to reinstall it but just try it.

  • Since upgrading to osx 10.8.2 sleep requires password even though i have set to open automatically.

    Since upgrading to osx 10.8.2 on my mid 2009 Mac Book Pro 15 inch, It requires me to enter my password even though automatic login is turned off. It never required this before. Why is it doing this now since the upgrade?

    Try reinstall iPhoto:
    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    2c: on 10.7 they're at
    /private/var/db/receipts
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.
    If that fails then I think you need to reinstall the OS.

  • I am currently running Leopard (10.5.8) on my late 2008 iMAC.  I want to upgrade to Mountain Lion and I have been informed that I must first upgrade to Snow Leopard first.  What operating issues could I face after doing this?

    Based on user issues I am reading should I even attempt this.  One of my reasons of wanting to upgrade is to have the ability to upgrade to newer versions of certain programs such as Lightroom and Adobe Photoshop.

    I've upgraded several Mac from 10.5 to 10.6 and all the installations were trouble-free. However, in an abundance of caution, back up before you start upgrading.
    RAM: Most 2008 iMac shipped with 2GB RAM. Your iMac 2008 can use up to 4GB RAM "officially" and up to 6GB with memory modules introduced since Apple's offical specs were engraved in stone. Although 10.6 may do ±OK with 2GB, I suspect Photoshop is glomming on to all you have. Lion10.7 will just barely work with 2GB and 10.8 Mtn Lion may slow to a crawl.
    I get all my RAM upgrades here:
    http://eshop.macsales.com/shop/memory/iMac/Intel_Core_2_Duo_PC2-6400
    Never had a problem with any of their RAM and I've been getting it from them for over a decade--and we have 18 Macs in the family!

  • TS4579 since i have installed os X  safari is not working properly and thunderbolt firmware update keps reappearing even though i have done the update .....

    Can anybody Help me ,
    my Mac was working great til i decided to update to OS X Mavericks and i ran the update and since then my Safari is crashing all the time and freezing too, i had to download opera which is working fine , and the update thunderbolt firmware keeps reappearing although i have done couple of times ...
    I wish i didnt

    bunjamin wrote:
    There is now a new line in BBM that wasn't there before which covers the message that I am typing, so I can't actually see what I am typing.
    Hi bunjamin,
    just go to BlackBerry World, and update all your apps including BBM.
    bunjamin wrote:
    Every time I unlock my phone, my screen enlarges so I can't really see much on the hub/notification screen and it defaults to the hub which it didn't do before).
    you can turn off the magnifying glass :
    device settings >> accessibility >> magnify mode >> OFF
    you can deactivate the "reset to Hub view" :
    hub >> overflow (bottom right button) >> Settings >> Display and actions >> Return to Default View When Idle >> OFF
    bunjamin wrote:
    my ringtone is much softer than it was previously
    yes, BlackBerry has acknowledged this bug in this article from the public knowledge base:
    KB36755 After upgrading BlackBerry 10 OS to version 10.3.1 the volume for notifications is noticed to be significantly lower than in the previous version
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Since installing yosemite the colors are washed out and whenever I restart the machine it reverts to the yosemite screensaver even though i have set a different desktop picture.

    Since i installed yosemite, the some parts of the screen can hardly be seen and whenever I restart the desktop display reverts back to the yosemite screensaver which I have never selected.  Do i need to reinstall or what.

    Please do the following.<br><br>
    #In the location bar where you normally type in a web address, type '''about:config''' and hit Enter.<br><br>
    #If you see a window which says "This might void your warranty!", click the button which says "I'll be careful, I promise" so you can continue with the next step.<br><br>
    #In the filter at the top, type: '''keyword.URL'''<br><br>
    #Double click it and remove whatever's in there and replace it with http://www.google.com.au/search?q= and then click OK.<br><br>
    #Close the tab
    The URL to add in "keyword.URL" becomes a link in this post, so right click it and choose "Copy Link Location" to copy it to the Windows clipboard. Then hit CTRL+V to paste it. Saves you having to type the whole thing.
    '''To reset your home page, do the following'''.<br><br>
    * Go to the site you want to set as your homepage.<br><br>
    * Click the Firefox button, go to '''Options '''| '''Options '''| '''General'''.<br><br>
    * Make sure it says "''Show My Homepage''" in the first dropdown menu.<br><br>
    * Click the button called "'''Use Current Pages'''" to set the homepage to the one you have on the screen.<br><br>
    If this suggestion resolves the problem for you, please click the '''Solved it''' button next to this post after you log in into the forum. This will help others searching for a solution to the same problem.
    Thanks.

  • Whenever i open a new tab, a website opens up, even though i have set a blank page as the opening page. How do i stop this?

    When i open a new tab it automatically goes to "http://www.bigseekpro.com/search/dns/anyvideo2dvd/{F8DC2913-2606-401B-8AED-0345AD711130}?q=bigseekpro.com/anyvideo2dvd/{F8DC2913-2606-401B-8AED-0345AD711130}?s_src=newta"
    This started after i had installed a software recently. I have uninstalled that software now. I even set the opening page as 'Blank'. Also hit the 'restore to default' button.
    But the problem still persists.
    (it doesnt happen when i open firefox, happens only when i open a new tab, when firefox is already open)
    How can i change it back to normal? I need only a blank page to open up.

    I have the same problem but I couldn't fix it with the way you mentioned.I have uninstalled the software which caused the problem even then i couldn't fix it.

  • I just upgraded to Mavericks and find that I'm being logged out after 15 mins even though I have set security

    I just upgraded my IMac to OS X MAVERICKS and find that I'm being prematurely logged out after 15 mins of inactivity even though my Privacy & Security settings are set to 1 hour.  Any suggestions on how to correct this problem? 

    I just upgraded my IMac to OS X MAVERICKS and find that I'm being prematurely logged out after 15 mins of inactivity even though my Privacy & Security settings are set to 1 hour.  Any suggestions on how to correct this problem? 

  • .png files open in browser even though I have set prefs for .png files to "Always ask" instead. How fo I force Firefox to save .pngs and not open in browser?

    Forefox will not download or ask me to save .png files even though I set that file extension in Prefs -> Applications dialog box to be "Always ask"
    I have to be able to donwload and save .png files and I can't do that if they load in a browser window.

    I find it odd that the browsers on the Android platform can't support this on their own. I know that Google Chrome on it's full blown version for the PC is able to do so without using the Adobe software for the embedded PDF aka using "The Adobe PDF Link Helper" . I would love to see this change especially since I prefer Firefox over other browsers.

  • Can't see the airplay symbol on any of my devices even though I have set up my new Apple TV correctly

    Using my iPad that I bought last month, new Apple TV, I have set up Apple TV and in settings turned AirPlay on. Going back to my iPad the AirPlay symbol is no where to be found, it is not at the bottom of the screen when I press the home button twice and swipe twice, and neither is it displayed if I select video or music. Any ideas greatly appreciated.
    Chris

    Thanks, I read several other threads and all it took was to turn off the router and turn it back on again, 'simples'.
    Thanks
    Chris

  • My bookmarks toolbar is blank even though I have bookmarks set for the toolbar

    If I click on the Bookmarks tab, the drop down window shows the sites I have selected for the bookmarks toolbar, but the toolbar is blank. This is a new problem - I used to be able to see the sites on my bookmarks toolbar

    Check that you still have the "Bookmarks Toolbar items" placed on the Bookmarks Toolbar
    * Make sure that you have the "Bookmarks Toolbar" visible: "View > Toolbars"
    * Check in "View > Toolbars > Customize" that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
    * If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the Customize window onto the Bookmarks Toolbar
    * If you do not see the "Bookmarks Toolbar items" then click the "Restore Default Set" button
    See http://kb.mozillazine.org/Toolbar_customization
    Your above posted system details show outdated plugin(s) with known security and stability risks.
    *Next Generation Java Plug-in 1.6.0_15 for Mozilla browsers
    Update the [[Java]] plugin to the latest version.
    *http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)

  • Even though I have WiFi connections at home, I can't get emails, nor surf the web... I am using my IMac connected at the same network and it is working right now

    Even though I am ahving WiFi connections at my home, and I have been using the same network for a while, I can't get my IPad connected. The net is working fine as I am using my IMac linked at the same WiFi connection. I already run the reset the network process. Nothing hapenned.

    Can I assume that you have connected to your home WiFi network in the past with your iPad? If you have, did you try any really basic troubleshooting steps like restart the iPad or reboot it?
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    iOS: Troubleshooting WiFi and network connections

Maybe you are looking for

  • How can i author a DVD with multiple timelines so that "previous chapter" actually works?

    I am trying to burn a DVD with multiple short films. i used a timeline for each film and a playlist for the "play all" button that includes all timelines. Problem is when you press previous chapter it only takes you to the beginning of the current fi

  • Strategy for iLife storage with Macbook Pro

    My iMac recently died and I just ordered a new Macbook Pro.  It only has 256GB of internal storage and I would rather not fill that up with my iPhoto, iMovie, iTunes libraries among other things.  So I will definitely have some form of external stora

  • Time machine verify backups sticks at 69%

    Mac os mountain lion 0s 10.8.2 No longer a disk image on the desktop but backup seems to be working.  Verification sticks on 69% Any help appreciated

  • Database Coonection in JDeveloper

    Hello, I'm working with Jdeveloper 10.1.3 ADF Faces. In my ADF Faces backing bean class I read text File and i must insert it to Oracle DB Table: How to use existing connection (for example HRConn) which is already defined in Connections Tab in Jdeve

  • Error message launching Lightroom

    I have just installed Lightroom 5 on a Mac, I was previously running it on a PC. It was also previously synched to my iPad. When I try and launch Lightroom the error message "An error occurred attempting to change modules". Any ideas how to fix/get a